Twinkly Pro TWPRO400WRLP User manual

USERGUIDE TWPRO400WRLP
REV 1.200601
Smart decoration solutions for professionals

READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1. Read and follow all safety instructions.
2. Do not use seasonal products outdoors unless marked
suitable for indoor and outdoor use. When products are
used in outdoor applications, connect the product to a
Ground Fault Circuit Interrupting (GFCI) outlet. If one is
installation.
3. This seasonal use product is not intended for permanent
installation or use.
4. Do not mount or place near gas or electric heaters,
5. Do not secure the wiring of the product with staples or nails,
or place on sharp hooks or nails.
6. Do not let lamps rest on the supply cord or on any wire.
burns, personal injury and electric shock it should not be
played with or placed where small children can reach it.
8. Do not use this product for other than its intended use.
9. Do not hang ornaments or other objects from cord, wire, or
light string.
10. Do not cover the product with cloth, paper, or any material
not part of the product when in use.
11. Do not close doors or windows on the product or extension
cords as this may damage the wire insulation.
12. Read and follow all instructions that are on the product or
provided with the product.
13. Save these instructions.
USE AND CARE INSTRUCTIONS
a. When the product is placed on a live tree, the tree
should be well maintained and fresh. Do not place on
b. Once the product is placed, the installation should be
well secured and stable.
c. Before using or reusing, inspect product carefully.
Discard any products that have cut damaged, or frayed
wire insulation or cords, cracks in the lampholders or
enclosures, loose connections, or exposed copper
wire.
d. When storing the product, carefully remove the
product from wherever it is placed, including trees,
branches, or bushes, to avoid any undue strain or
stress on the product conductors, connections, and
wires.
e. When not in use, store neatly in a cool, dry location
protected from sunlight.
ATTENTION – TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK
a. Do not install on surfaces having sharp edges, or
coverings of metal or materials which look like metal.
b. Do not mount or support wires in a manner that can
cut or damage wire insulation.

Class A Disclaimer: This equipment has
been tested and found to comply with
the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and
can radiate radio frequency energy and,
if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio
or television reception, which can be
determined by turning the equipment
try to correct the interference by one or
more of the following measures:
i. Reorient or relocate the receiving
antenna.
ii. Increase the separation between the
equipment and receiver.
iii. Connect the equipment into an
to which the receiver is connected.
iv. Consult the dealer or an experienced
radio/television technician for help.
WARNING!
Do not connect the light string to the
power supply while it is in the packaging.
The connecting cable cannot be repaired
or replaced. THE LAMPS ARE NOT
REPLECEABLE. The lighting chain must
not be used without all gaskets being
in place. Lighting chains not intended
for interconnection. Do not connect
this light string electrically to devices
from another manufacturer. CAUTION!
Strangulation hazard. Keep out of reach
of young children.
The crossed-out wheeled bin symbol
indicates that the item should be
disposed of separately from household
waste. The item should be handed in
for recycling in accordance with local
environmental regulations for waste
disposal.
No. of ports1 (*)
IP ratingIP65
Connectivity Wi-Fi|Bluetooth for
instant setup
Power rating48 W MAX
Adapter input
voltage
120 - 240 VAC | max
50/60Hz
Temperature
range
-15°C / 40°C | 5°F /
104°F
Storage
temperature
range
-20°C / 60°C | -4°F /
140°F
CertificationUS |EU certified
Warranty 24 months
TECHNICAL SPECIFICATIONS
(*) extendible to 2 with TWPRO400SPLITTER-2

Introduction 5
Package Contents 6
Installation Requirements 7
INSTALLATION PROCESS
Connect Light Strings 8
Powering up the Controller 9
Controller’s LED Status Indicator 10
Reset your Controller 11
Multi-controller Setup 12
TABLEOF CONTENTS

Thank you for choosing Twinkly Pro for your lighting needs.
This manual will provide detailed instructions, guide you through
the entire setup process, and assist you with the recommended
installation procedure for your device(s).
By reading this step-by-step guide you will:
• avoid making common installation mistakes;
• learn the technical and practical knowledge needed to operate
and manage your device(s) properly;
• minimize the need for Technical Support;
• help create the best experience possible for you and your
customers.
ready to decorate like a boss!
Sincerely,
THE TWINKLY PRO TEAM
Introduction
5

6
Package Contents
What is inside the box
1TWPRO400WRLP Wi-Fi Controller
2AC Power Adapter
1
2

7
Installation Requirements
What is required for the installation *
3Twinkly Pro Light Strings (up to 2** per TWPRO400WRLP controller)
4**TWPROSPLITTER-2 (allows to connect up to 2 strings to the same controller)
3
4
* purchased separately

8
STEP 1
Connect
Light Strings
A B
NOTE
We recommend installing lights strings before
connecting them to the controller(s).
You can connect up to 250 LEDs to a single port
Type allowed - RGB (Red, Green, Blue)
RGB+W (Red, Green, Blue + Warm White)
AWW (Amber, Warm White, Cold White)
You can connect up to 500 LEDs using TWPROSPLITTER-2
Type allowed - RGB (Red, Green, Blue)
AWW (Amber, Warm White, Cold White)

9
STEP 2
Powering up
the Controller
Connect the AC cable to the power adapter
Connect the power adapter to a power socket
Your controller is now powered up
1
2

10
Controller’s
LED Status
Indicator
Flashing Green
Steady Green
Flashing Blue
Steady Blue
Flashing Red
Steady Light Blue
Steady Yellow
Steady Red
Flashing White
COLOR
Direct Wi-Fi mode
Direct Wi-Fi mode
Home Wi-Fi network mode
Home Wi-Fi network mode
Home Wi-Fi network mode
Setup mode
Firmware update
General Error
Reset procedure
MEANING
Device not connected
Device connected
Connection in progress
Device connected
Unable to connect
Bluetooth ON
In progress
In progress
MEANING

11
Reset your
Controller
Unplug Twinkly from the power socket
Press and hold the controller button
While holding the button, plug in Twinkly
Keep holding the button until all LEDs turn red
(or amber for AWW), then release the button
1
2
3

12
Multi-
controller
Setup
Twinkly App functions for
multi-controller installations:
- Grouping
- Join
- Sync
- Scenes
- Mapping 2,000 Bulbs
Installation
VERTIG O

If you need any further information,
please feel free to contact us:
[email protected]