TwinWin TWV203 User manual

PLEASE READ THE FOLLOWING USER MANUAL FOR TWV-203 CAR-KIT. THE FUNCTION MIGHT BE
SLIGHTLY DIFFERENT DUE TO DIFFERENT MODELS OF CELLULAR PHONE
PLEASE READ THE FOLLOWING USER MANUAL FOR TWV-203 CAR-KIT. THE FUNCTION MIGHT BE
SLIGHTLY DIFFERENT DUE TO DIFFERENT MODELS OF CELLULAR PHONE
USER MANUAL FOR TWV-203 CAR-KIT
USER MANUAL FOR TWV-203 CAR-KIT
KEY FUNCTIONS
BUTTONS
ANSWER/PAIRING/HANG UP
STATUS INDICATORS
CONNECTING YOUR CAR-KIT WITH CELLULAR PHONE
BEFORE YOU CONNECT TO CAR-KIT, YOUR CELLULAR PHONE MUST BE ENSURE
TO HAVE COMPLETED CONNECTION AND PAIRING WITH CAR-KIT. THE
CAR-KIT WILL THEN MEMORIZE YOUR CELLULAR PHONE CODE. BEFORE YOU
OPERATE THE CAR-KIT, THE BEEP SOULD WOULD BE ACTIVATED AS STARTING
AND AUTOMATICALLY SEARCHING FOR THE CONNECTION WITH CELLULAR PHONE. THE
CAR-KIT WILL ONLY SEARCH FOR CONNECTION WITH CELLULAR PHONE WITHIN 30
SECONDS. IF THE SEARCHING TIME IS OVER 30 SECONDS, IT MEANS THE CONNECTION BETWEEN
CAR-KIT AND CELLULAR PHONE IS FAILED.
NOTED: IF THE CAR-KIT NEVER BE PAIRING WITH ANY CELLULAR PHONES,
THEN THE INDICATOR WOULD BE RED LIGHT WITHOUT BEEP SOUND AS THE CAR-KIT
TURNED ON AS STARTING.
PAIRING
THE CAR-KIT WITH CELLULAR PHONE WITHIN SHORT DISTANCE
OPERATEION STATUS
DURING THE PAIRING, THE STATUS
INDICATOR WOULD BE FLASH BETWEEN RED
LIGHT AND GREEN LIGHT SLOWLY.
SET UP THE CAR-KIT IN
PAIRING MODE.
PRESS "ANSWER/PAIRING/ HANG UP " KEY
FOR 3 SECONDS TO ENTER PAIRING MODE. IF
THE ABOVE ACTION WERE REPEATED,THEN
THE PAIRING WOULD BE CANCELLED
IMMEDIATELY.
USER WILL HAVE 5 MINUTES TO SET UP THE
WIRELESS CONNECTION BETWEEN
CAR-KIT AND CELLULAR
PHONE. IF USER LIKES TO CANCEL THE
PAIRING, PLEASE REPEAT THE OPERATION AS
SAME AS PAIRING SET UP, THEN THE
CANCELLATION OF PAIRING WOULD BE
ACTIVAED IMMEDIATELY.
SET UP THE SEARCHING OF CELLULAR PHONE AND CONNECTION OF CAR-KIT
PLEASE USE THE CAR-KIT CELLULAR PHONE FOR SEARCHING THE CAR-KIT
(THE DETAILED OPERATION, PLEASE REFER TO CELLULAR PHONE USER MANUAL)

1. AFTER SEARCHING, THE CELLULAR PHONE WILL DISPLAY THE MODEL OF CAR-KIT AS TWV-203.
2. PLEASE SELECT TWV-203 AS PAIRING.
3. ENTER THE ID CODE " 0000"
4. AFTER THE PAIRING IS COMPLETED, THE DISPLAY OF CELLULAR PHONE WILL JUMP BACK TO
ORIGIN AS THE CELLULAR PHONE TURN ON.
5. WHEN THE PAIRING IS COMPLETED, THE STATUS INDICATOR WOULD BE TURNED TO GREEN
STEADY.
CONNECTION
OPERATION STATUS
WHEN THE POWER OF CAR-KIT IS TURNED ON,
THE BEEP SOUND
WOULD BE ACTIVAED AND
AUTOMATICALLY SEARCHING FOR
CELLULAR PHONE. IF THE CONNECTION IS
FAILED, PLEASE PRESS
"ANSWER/PAIRING/HANG UP"BUTTOM FOR
ANOTHER 30 SECONDS SEARCHING. IF THE
CONNECTION IS STILL FAILED WITHIN 30
SECONDS SEARCHING, IT MEANS THE
CAR-KIT HAS GIVEN UP THE
SEARCHING AND CONNECTION FOR
CELLULAR PHONE.
AFTER THE POWER IS ON OR PRESS THE
"ANSWER/PAIRING/HANG UP" BUTTON, THE
CAR-KIT HAS BEEN
STARTED THE CONNECTION WITH
CELLULAR PHONE. AT THIS MOMENT, THE
STATUS INDICATOR WOULD BE FLASHED
FASTLY. IF THE CONNECTION IS
COMPLETED, THE STATUS INDICATOR
WOULD BE TURNED ON TO GREEN STEADLY.
DISCONNECT THE CAR-KIT AND CELLULAR PHONE
PRESS "ANSWER/PAIRNG/HANG UP" BUTTON FOR 3 SECONDS, THEN THE DISCONNECTION WOULD
BE ACTIVATED BETWEEN CAR-KIT AND CELLULAR PHONE.
IF THE POWER OF CAR-KIT IS SWITCH OFF, THE DISCONNECTION WOULD ALSO
BE ACTIVATED AUTOMATICALLY BETWEEN CAR-KIT AND CELLULAR PHONE.
ANSWER FOR INCOMING CALL
WHEN THE CELLULAR PHONE RECEIVE INCOMING CALL, THE STATUS INDICATOR WOULD BE
FLASHED. PRESS THE "ANSWER/PAIRING/HANG UP" BUTTON FOR PICKING UP THE CALL.
HANG UP THE PHONE
DURING THE PHONE CONVERSATION, PRESS "ANSWER/PAIRING/HANG UP" BUTTON FOR HANG UP
THE PHONE CALL.
VOICE DIAL
DURING THE CONNECTION (NOT CONVERSATION), PRESS "ANSWER/PAIRING/HANG UP" BUTTON
FOR ACTIVATING THE VOICE DIAL OF CELLULAR PHONE.

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
maycause undesired operation.
Any changes or modifications (including the antennas) made to this device that are
not expressly approved by the manufacturer may void the user’s authority to operate
the equipment.
FCC RF Radiation Exposure Statement: This equipment complies with FCC RF
radiation exposure limits set forth for an uncontrolled environment. This device and
its antenna must not be co-located or operating in conjunction with any other antenna
or transmitter.