
2400 - Outdoor Gate CS0000 06/12/2016
Adults Required For Assembly
Assembly Instructions
Please read these instructions carefully before assembling the unit
and here necessary refer to the enclosed Component List.
“Leave Me Outdoors Range” “Leave Me Outdoors Range”
2400
OUTDOOR GATE
An Adult Should ALWA S SUPERVISE PLA !
This unit is designed for use on a flat level surface.
Please retain our address for future reference
Maintenance.
Some residual dust from the manufacturing process may be apparent
.
This ill ipe off ith a damp cloth.
Examine all fasteners periodically and retighten here necessary.
Care must be taken not to over tighten the fasteners.
Additional Tools Required
Manufactured by:
Mike Miller Associates Ltd.,
Syke Road, Wigton. Cumbria CA7 9NS
Tel: 016973 49774/45300 Fax: 016973 45511
Email: info@t oey.co.uk
Website: .t oeytoys.com
Registered in England No: 1425839
Registered Office: The Old Bre ery, Caldbeck.
Weathering Effects.
Like all natural timbers hen subjected to the elements, under certain
conditions, some surfaces may be susceptible to staining, moulds &
mosses. Though unsightly these conditions ill not cause rot ithin
the material. Should staining occur it is suggested that the surface be
cleaned ith a mild detergent
.
Fading may occur if left in direct sunlight for prolonged periods of
time.