Twothousand TT-E5A User manual
Manual Waffle Baker User Manual
R1 R2
SA
D1
K
BD
Ⅰ. Technical parameter
Name
1-Head Waffle Baker
2-Head Waffle Baker
Model
TT-E5A
TT-E5B
Voltage
220V
220V
Power
1000W
1000
＋
1000W
Dimension
250×450×300
500×450×300
Ⅱ. Precautions
1. The voltage for using must be coordinated with the supplied voltage.
2. Install a tripodal socket with good ground-connection beside the equipment.
3. The temperature can be adjusted in the range of 25℃±5%.
4. There is timer-setting equipment in this appliance. It only shows operating time and has no
connection with electric function.
Ⅲ. Instruction
1. Plug in socket, press power switch then indicator is on, equipment begins to heat. When
temperature goes up to 250℃,the equipment stops heating automatically. When temperature lowers
250℃the equipment get through electricity automatically and heats again. It does repeatedly in this
way to make sure temperature is constant in the range of 250℃.
2. It needs 12 minutes from pressing power switch to the temperature of oven goes up to 250℃.
3. When temperature of this equipment goes up to 250℃, paint a layer of edible vegetable oil onto
mould. Then make pulp, and put them into template, and cover it. Adjust the timer on right side (the
range of setting time is 0~5 minute; operator can set time with their own). When time is to the
setting one, the oven will give out a sound “Ting” to point out operator that time is up, the
production is finished. Then operator can make other food. When food all is finished, operator
should cut off electricity.
4. User can make time setting according to the difference of prescription of pulp and luster of food
customer likes. Generally, the more time lasts the darker luster will be, whereas, it is not. But time
cannot be too short, or food will not be hot and with no luster.
5. Cleaning: This equipment can be washed by wet towel with cleaner, but it cannot be washed
by water directly and in water. Or its electric function will be destroyed.
Ⅳ
. Circuit diagram
SA—TEMPERATURE CONTROL SWITCH
R2—ELECTRIC HEATING TUBE
R1—LOW ELECTRIC HEATING TUBE
D1—INDICATOR
K—POWER SWITCH
2
NO.18 - 105, HUAGANG GARDEN, ZHONGSHAN AVENUE, GUANGZHOU, CHINA
T: 86-20-38768241 | F: 86-20-38769376 | WWW.TWOTHOUSANDCO.COM
Manual Waffle Baker User Manual
BD—CONNECTED-SCREW
Ⅴ
. Troubleshooting
Trouble
Cause
Resolve
Get through power and press
switch, indicator is on but not
heat
1. Temperature control
switch broken
2.
One of electric tubes
burned
1. Change temperature
controller
2. Change broken electric
heating tube (there are tow,
each is 110V)
Get through power and press
switch, indicator is on,
temperature rises but it cannot
be controlled
Temperature control switch
broken
Change temperature control
switch
Get through power, heating
normally but indicator is not on
Indicator broken
Change indicator
Get through power and press
switch, indicator is not on and
not heat
Power supply is not normal,
not get through power or fuse
melt
Check power or change fuse
3
NO.18 - 105, HUAGANG GARDEN, ZHONGSHAN AVENUE, GUANGZHOU, CHINA
T: 86-20-38768241 | F: 86-20-38769376 | WWW.TWOTHOUSANDCO.COM
This manual suits for next models
1
