TYAN GT24 B5501 User manual

1
http://www.tyan.com
TYAN GT24
B5501
Service Engineer’s Manual

2
http://www.tyan.com

3
http://www.tyan.com
PREFACE
Copyright
This publication, including all photographs, illustrations, and software, is
protected under international copyright laws, with all rights reserved.
Neither this manual, nor any material contained herein, may be reproduced
without written consent of manufacturer.
Copyright 2010 MiTAC International Corporation. All rights reserved.
TYAN®is a registered trademark of MiTAC International Corporation.
Version 1.00
Disclaimer
Information contained in this document is furnished by MiTAC International
Corporation and has been reviewed for accuracy and reliability prior to
printing. MiTAC assumes no liability whatsoever, and disclaims any
express or implied warranty, relating to sale and/or use of TYAN®products
including liability or warranties relating to fitness for a particular purpose or
merchantability. MiTAC retains the right to make changes to produce
descriptions and/or specifications at any time, without notice. In no event
will MiTAC be held liable for any direct or indirect, incidental or
consequential damage, loss of use, loss of data or other malady resulting
from errors or inaccuracies of information contained in this document.
Trademark Recognition
All registered and unregistered trademarks and company names
contained in this manual are property of their respective owners including,
but not limited to the following.
TYAN®is a trademark of MiTAC International Corporation.
Intel®is a trademark of Intel®Corporation.
AMI®, AMIBIOS® and combinations thereof are trademarks of AMI
Technologies.
Microsoft®, Windows®are trademarks of Microsoft Corporation.
IBM®, PC®, AT®and PS/2®are trademarks of IBM Corporation.
Winbond®is a trademark of Winbond Electronics Corporation.

4
http://www.tyan.com
Federal Communication Commission (FCC)
Notice for the USA
Compliance Information Statement (Declaration of
Conformity Procedure) DoC FCC Part 15: This
device complies with part 15 of the FCC Rules
Operation is subject to the following conditions:
1) This device may not cause harmful interference;
2) This device must accept any interference received including
interference that may cause undesired operation. If this equipment
does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the
user is encouraged to try one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and the receiver.
– Plug the equipment into an outlet on a circuit different from that of
the receiver.
Consult the dealer on an experienced radio/television technician for
help.
Notice for Canada
This apparatus complies with the Class A limits for radio interference as
specified in the Canadian Department of Communications Radio
Interference Regulations. (Cet appareil est conforme aux norms de
Classe A d’interference radio tel que specifie par le Ministere Canadien
des Communications dans les reglements d’ineteference radio.)
Notice for Europe (CE Mark)
This product is in conformity with the Council
Directive 89/336/EEC, 92/31/EEC (EMC).
CAUTION: Lithium battery included with this board. Do not puncture,
mutilate, or dispose of battery in fire. There will be danger of explosion if
battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by manufacturer. Dispose of used battery according
to manufacturer instructions and in accordance with your local regulatio-
-ns.

5
http://www.tyan.com
About this Manual
This manual provides you with instructions on installing your TYAN
GT24-B5501. This Manual is intended for experienced users and
integrators with hardware knowledge of personal computers.
This manual consists of the following parts:
Chapter1: Provides an introduction to the TYAN GT24-B5501
barebones, standard parts list, describes the external
components, gives a table of key components, and
provides block diagram of the system.
Chapter2: Covers procedures on installing the CPU, memory
modules and hard drives.
Chapter3: Covers removal and replacement procedures for
pre-installed components.
Appendix: List the cable connection and FRU part tables for
reference of system setup, and technical support in
case a problem arises with your system.
For information on the motherboard, please refer to the
attached motherboard user’s manual. You can find the detailed
description about jumper and BIOS settings from the
motherboard manual.

6
http://www.tyan.com
SAFETY INFORMATION
Before installing and using TYAN GT24-B5501, take note of the following
precautions:
·Read all instructions carefully.
·Do not place the unit on an unstable surface, cart, or stand.
·Do not block the slots and opening on the unit, which are provided for
ventilation.
·Only use the power source indicated on the marking label. If you are not
sure, contact the power company.
·The unit uses a three-wire ground cable, which is equipped with a third
pin to ground the unit and prevent electric shock. Do not defeat the
purpose of this pin. If you outlet does not support this kind of plug,
contact your electrician to replace your obsolete outlet.
·Do not place anything on the power cord. Place the power cord where it
will not be in the way of foot traffic.
·Follow all warnings and cautions in this manual and on the unit case.
·Do not push objects in the ventilation slots as they may touch high
voltage components and result in shock and damage to the
components.
·When replacing parts, ensure that you use parts specified by the
manufacturer.
·When service or repairs have been done, perform routine safety checks
to verify that the system is operating correctly.
·Avoid using the system near water, in direct sunlight, or near a heating
device.
·Cover the unit when not in use.

7
http://www.tyan.com
Table of Contents
Chapter 1: Overview.........................................................................9
1.1 About the TYAN GT24-B5501 .................................................. 9
1.2 Product Models......................................................................... 9
1.3 Features.................................................................................. 10
1.4 Standard Parts List ................................................................. 14
1.4.1 Box Contents ................................................................... 14
1.4.2 Accessories ..................................................................... 15
1.5 About the Product................................................................... 16
1.5.1 System Front View........................................................... 16
1.5.2 System Rear View ........................................................... 16
1.5.3 LED Definitions ................................................................ 17
1.5.4 Motherboard (S5501) Layout........................................... 19
1.5.5 Jumpers & Connectors .................................................... 20
1.5.6 System Block Diagram .................................................... 21
1.5.7 Internal View .................................................................... 22
Chapter 2: Setting Up..................................................................... 23
2.0.1 Before you Begin ............................................................. 23
2.0.2 Work Area........................................................................ 23
2.0.3 Tools ................................................................................ 23
2.0.4 Precautions...................................................................... 24
2.1 Installing Motherboard Components....................................... 25
2.1.1 Removing the Chassis Cover .......................................... 25
2.1.2 Installing the CPU and Heatsink...................................... 26
2.1.3 Installing the Memory....................................................... 29
2.1.4 Installing Hard Drives....................................................... 32
2.1.5 Installing the PCI-E Cards ............................................... 34
2.2 Rack Mounting........................................................................ 36
2.2.1 Installing the Server in a Rack......................................... 36

8
http://www.tyan.com
2.2.2 Installing the inner Rails to the Chassis........................... 37
2.2.3 Installing the Outer Rails to the Rack .............................. 38
2.2.4 Rack mounting the Server ............................................... 40
Chapter 3: Replacing Pre-Installed Components ........................ 43
3.1 Introduction ............................................................................. 43
3.2 Disassembly Flowchart........................................................... 43
3.3 Removing the Cover ............................................................... 45
3.4 Replacing Motherboard Components..................................... 45
3.4.1 Replacing Expansion Card .............................................. 45
3.4.2 Disconnecting All Motherboard Cables ........................... 47
3.4.3 Removing the Motherboard ............................................. 49
3.5 Replacing the LED Control Board .......................................... 50
3.5.1 M1008 LED Control Board Features ............................... 52
3.5.2 M1008 LED Control Board Connector Pin Definition ...... 52
3.6 Replacing the System Fan ..................................................... 53
3.7 Replacing the M1232 HDD Backplane ................................... 56
3.7.1 M1232 HDD Backplane Features.................................... 58
3.7.2 M1232 HDD Backplane Connector Pin Definitions ......... 60
Appendix I: Cable Connection Tables ..........................................65
Appendix II: FRU Parts Table ........................................................ 67
Appendix III: Technical Support....................................................69

9
http://www.tyan.com
Chapter 1: Overview
1.1 About the TYAN GT24-B5501
Congratulations on your purchase of the TYAN®GT24-B5501, a highly
optimized rack-mountable barebone system. GT24-B5501 is designed to
support one Intel® Xeon processor 3400 Series and up to 32GB RDIMM or
16GB UDIMM DDR3-800/1066/1333 memory, providing a rich feature set
and incredible performance. Leveraging advanced technology from Intel®,
GT24-B5501 server system is capable of offering scalable 32 and 64-bit
computing, high bandwidth memory design, and lightning-fast PCI-E bus
implementtation.GT24-B5501 not only empowers your company in
nowadays IT demand but also offers a smooth path for future application
usage.
TYAN®is also proud to deliver GT24-B5501 in flavor while supporting up to
four hot-swap hard drives. GT24-B5501 uses TYAN®’s latest chassis
featuring a robust structure and a solid mechanical enclosure. All of this
provides GT24-B5501 the power and flexibility to meet the needs of
nowadays server application.
1.2 Product Models
Model HDD Bays Power supply
B5501G24V4H Hot-swap, 4 HDDs 400 Watts single

10
http://www.tyan.com
1.3 Features
TYAN GT24B5501 (B5501G24V4H)
Form Factor 1U Rackmount
Chassis Model GT24
Dimension (D x W x
H)
25.4" x 17.2" x 1.72" (645 x 436 x 43.6mm)
Motherboard S5501GM3NR
Board Dimension EATX, 12"x13" (305x330mm)
System
Gross Weight 16 kg
Buttons (1) RST / (1) NMI / (1) ID / (1) PWR w/ LED
LEDs (1) ID / (1) Warning / (3) LAN / (1) Reserved
Front Panel
I/O Ports (2) USB ports
Type / Q'ty 3.5" Hot-Swap / (4)
External Drive
Bay Supported HDD
Interface
SATA-II 3.0Gb/s
System Cooling
Configuration
FAN (4) 4cm fans
Type EPS1U
Input Range Full-range AC(100-240V)
Frequency 47 - 63 Hertz
Output Watts 400 Watts
Power Supply
Efficiency PFC
Supported CPU
Series
Intel Xeon Processors 3400 Series
Processor
Socket Type / Q'ty LGA 1156/ (1)

11
http://www.tyan.com
Thermal Design
Power (TDP)
wattage
Max up to 95W
PCH Intel 3420
Chipset
Super I/O Winbond W83627
Supported DIMM
Qty
(6) DIMM slots
DIMM Type / Speed
DDR3 800/1066/1333* RDIMM/UDIMM / * limit 1
per channel for 1333MHz speed
Capacity Up to 32GB RDIMM/ 16GB UDIMM
Memory channel
2 Channels / Support 2 UDIMMs or 3 RDIMMs
per channel
Memory
Memory voltage 1.5V
PCI-E (2) PCI-E Gen.2 x8 slots
Pre-install TYAN
Riser Card
M2091, PCI-E x16 1U riser card (left) / M2091-R,
PCI-E x16 1U riser card (right)
Expansion Slots
Note: x8 signal when using M2091 & M2091-R
Port Q'ty (3)
LAN
Controller Intel 82574L
Connector type D-Sub 15-pin
Resolution 1600x1200@75Hz
Graphic
Chipset Aspeed AST2050
USB (4) ports (2 at front, 2 at rear)
COM (1) DB-9 COM port
PS/2 (1) PS/2 connector (for Keyboard and Mouse)
I/O Ports
VGA (1) D-Sub 15-pin port

12
http://www.tyan.com
RJ-45 (3) ports
Chipset Winbond W83793G
Voltage
Monitors voltage for CPU, memory, chipset &
power supply
Temperature
Monitors temperature for CPU & system
environment
LED
Fan fail LED indicator / Over temperature warning
indicator
System
Monitoring
Others
Chassis intrusion detection / Watchdog timer
support
Onboard Chipset Onboard Aspeed AST2050
AST2050 IPMI
Feature
IPMI 2.0 compliant baseboard management
controller (BMC) / Supports storage over IP and
remote platform-flash / BIOS update
Server
Management
AST2050 iKVM
Feature
24-bit high quality video compression / Dual
10/100 Mb/s MAC interfaces
Brand / ROM size AMI / 4MB
BIOS
Feature
Plug and Play (PnP) /PCI2.3 /WfM2.0
/SMBIOS2.3 /PXE boot / ACPI 2.0 power
management /Power on mode after power
recovery / User-configurable H/W monitoring /
Auto-configurable of hard disk types
Operating
System
OS supported list Please visit our Web site for the latest update.
FCC (DoC) Class A
CE (DoC) Yes
Regulation
C-Tick Yes

13
http://www.tyan.com
VCCI Yes
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp.
- 40° C ~ 70° C (-40° F ~ 158° F)
Operating
Environment
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS RoHS 6/6 Complaint Yes
Barebone (1) GT24B5501 Barebone
Manual
(1) Quick Ref. Guide / (1) MB User's manual + (1)
BB User's manual
Installation CD (1) TYAN installation CD
Heatsink / Cooler (1) LGA1156 CPU heatsink
Rail kit (1) CRAL-0031, sliding rail kit for KGT24
Mounting Ear (1) CEAR-0050, mounting ear kit for GT20/ GT24
Others (1) HDD screw pack
Package
Contains
Cable Power Cord
(1) CCBL-0310, US type power cord / (1)
CCBL-0300, EU type power cord

14
http://www.tyan.com
1.4 Standard Parts List
This section describes GT24-B5501 package contents and accessories.
Open the box carefully and ensure that all components are present and
undamaged. The product should arrive packaged as illustrated below.
1.4.1 Box Contents
Component Description
1U chassis,(4) hot swap HDDbays
TYAN®S5501 system board
(pre-installed)
400W single Power Supply
(4) 40x28mm System FAN
(pre-installed)
M1008：
LED control board (pre-installed)
M1232 HDD Backplane
(pre-installed)
M2091 PCI-E riser card
(pre-installed)
M2091-R PCI-E riser card
(pre-installed)

http://www.tyan.com
15
1.4.2 Accessories
If any items are missing or appear damaged, contact your retailer or
browse to TYAN®’s website for service: http://www.tyan.com
The web site also provides information of other TYAN®products, as
well as FAQs, compatibility lists, BIOS settings, etc.
1 x TYAN®Motherboard
Drive CD 1 x Heatsink
HDD Screws Power Cables
Left to right: Europe, US
Mounting Ears & Screws Barebone Manual &
Mainboard Manual
Rail Kit
Rail with Bracket x 2 Screw Pack

http://www.tyan.com
16
1.5 About the Product
The following overview illustrations show you the features of the product.
1.5.1 System Front View
1.5.2 System Rear View

http://www.tyan.com
17
1.5.3 LED Definitions
Front Panel
LED State Color Description
On Green System is turned on
On Green System is under S1
Power
LED
Off Off Power off
Blinking Green LAN active
On Green LAN linked
NIC1
off off LAN not linked
Blinking Green LAN active
On Green LAN linked
NIC2
off off LAN not linked
Blinking Green LAN active
On Green LAN linked
NIC3
off off LAN not linked
On Red
Fan fail /Over temperature
/Over voltage
Warning
LED Off Off No failure
On Blue System identified
ID LED Off Off System not identified
On Amber PSU fail
Blinking Amber PSU alert
BMC LED
Off Off No failure
Rear I/O
LAN1/LAN2
LED State Color Description
On Green 10Mb/100Mb/1000Mb linked
Blinking Green 10Mb/100Mb/1000Mb activity
RJ-45
Linkage/
Activity(left) Off Off No LAN linked
On Amber 1000Mb linked/activity
On Green 100Mb linked/activity
RJ-45
Linkage/
Activity(Right) Off Off 10Mb mode or No LAN linked
NOTE: “Left” and “Right” are viewed from the rear panel.

18
http://www.tyan.com
LAN3
LED State Color Description
On Green 10Mb/100Mb/1000Mb linked
Blinking Green 10Mb/100Mb/1000Mb activity
RJ-45 Linkage/
Activity(left) Off Off No LAN linked
On Amber 1000Mb linked/activity
On Green 100Mb linked/activity
RJ-45 Linkage/
Activity(Right) Off Off 10Mb mode or No LAN linked
ID LED
LED State Color Description
On Blue System identified
ID LED Off Off System not identified

http://www.tyan.com
19
1.5.4 Motherboard (S5501) Layout
The diagram is representative of the latest board revision available at the time of
publishing. The board you receive may not look exactly like the above diagram.
Jumper Legend
OPEN - Jumper OFF Without jumper cover
CLOSED - Jumper ON With jumper cover

http://www.tyan.com
20
1.5.5 Jumpers & Connectors
Jumper/Connector Function
J5/J7/J27/J35/J36/J37 4-pin Fan connector
J38/J39/J40/J41/J42 8-pin 4056 Fan Header
J21/J22/J25/J26 (blue) USB Front Panel Header
USB1 Type-A USB Connectors
LED1 ID LED
J6 COM2 Header
J12 LAN3 LED Header
J13 Chassis Intrusion Jumper
J14 Port80 Header
J16 Front Panel Connector
J17 ICH SGPIO Header
J24 PSMI Connector
J11 Enable/Disable BMC Jumper
JP1 Clear CMOS Jumper
JP2/JP3 COM switch Jumper
JP4 (S5501WGM3NR only) Enable/Disable SAS1068E Jumper