Tzone TT18 User manual

Real-Time Temp & RH and Location
Data Logger
——TT18
It`s time to use TT18 real-time data logger to real-time manage and control
your products while in-transit.
This easy to use system provides global visibility at an affordable cost.
Simply initiate a shipment and place a TT18 real-time data logger.
Cloud-based monitoring platform will then start reporting location and
temperature, so you always know where your products are and in what
condition.
Call us today and avoid shipping loses!
Features:
Real time temperature and humidity measurement
High precise temperature and humidity sensor
Free platform using, free Simcard
Temperature, humidity and location tracking
Easy to use
Specifications:
Usage Type Single use
Inner Lithium Battery Built-in 3.7V/3000mAh Lithium Battery
Working Life Max 60days
Accuracy of Temp and Humidity Sensor Temp: ±0.3℃; Humidity: ±3%RH
Working Temperature Condition -20°C to +60°C
Working Humidity Condition Up to 85% (non-condensing)
Transmit Interval 15mins
Dimension 90mm * 64mm * 27mm (3.54in * 2.52in * 1.06in)
N.W 138g
Tracking Platform cloud.tzonedigital.com
How to use:
Press the button to start Put into the box/carton Logging and transmitting Temp & RH data Access cloud platform to check data
Tzone Digital Technology Co., Ltd
Tel: [phone] Fax: [phone] Email: [email protected] Web: www.tzonedigital.com
Address:16D, Haiying Building, South of Caitian Road, Futian District, Shenzhen, China, 518033

Real-time Temperature and Humidity Data Logger
(Single-use)
TT18 User Manual V1.2
1. Product overview
TT18 real-time single-use temperature and humidity data logger is one kind of Tzone cold chain
data logger.
The system is easy to use and provides global visibility at an affordable cost. Simply initiate a
shipment and place a TT18 real-time data logger. Then, could-based monitoring platform will start
reporting temperature, humidity and location, so you will always know where and under what
conditions your product is.
It is suitable for real-time monitoring the transportation process of food, medicine, chemical
products, etc., and widely used in all aspects of logistics cold chain, such as refrigerated containers,
refrigerated trucks, refrigerated distribution boxes, etc.

2. Specification
3. Product part
Item
Details
Dimension
90mm*64mm*27mm (3.54in*2.52in*1.06in)
N.W
138g
Usage type
Single use
Transmit interval
15 mins
Built-in battery
3.7V/3000mAh Lithium battery
GSM antenna
Built-in
Transmission mode
GPRS
Data storage capacity
Can store 6700 measurement data
Temperature accuracy
±0.3℃
Working temperature range
-20℃~ +60℃
Humidity accuracy
±3%
Working humidity range
0~85%
Power Consumption
Active mode (avg.) < 100mA
Sleep mode (avg.) < 20uA
GSM frequency
Support 850/900/1800 /1900MHz
Indicator
Indicating device status
Duration
Up 60 days
B
A1
A2
C

Item
Part
Function
A1
Green LED
Device status indicator (green)
A2
Red LED
Device status indicator (red)
B
USB port
Extract data stored in the device
C
Button
Power on/Check or send data immediately
4. Device status
5. Use device with the platform
The SIM card and battery have been inserted into the device. Just long press the button for more
than 3 seconds and the green light turns on for 5 seconds, the device will start to run (Please check
the device before using). Typing the TT18 IMEI number on http://cloud.tzonedigital.com to
monitor the data information.
Status
Button action
LED status
Description
Check
Click once the button
before starting
Both lights flash once
at the same time
If both green and red
lights don’t blink at the same time,
please don’t use it
Start
Keep button pressed
for more than 3 sec.
Green light on for
5 sec.
Device starts sending data
Monitoring
N/A
Green light flashes
once every 10 sec.
Typing the TT18 IMEI number on
http://cloud.tzonedigital.com to
monitor
Mark
Short press button
once
Green light flashes
once
Send one data immediately after the
device is awakened

5.1 Please enter IMEI
Fill in the IMEI of the device into the input box, then click “search”, you can view the data of this
device (the device sends data every 15 minutes by default). After entering this interface, you can
query real-time data, historical data graphs, historical trajectories of base stations and history
download information;

5.2 Login Account
You can log in to the registered account after clink into “Login account”, to view more detailed
device information;

5.3 Sign Up New Account
Account can be registered after clink into “Sign Up New Account”