Tzone TZ-BT05 User manual

TZ-BT05
--- User Manual v1.4

1 Product Overview
TZ-BT05 is a low power consumption Bluetooth data logger, using the latest
Bluetooth 4.0 technology, Nordic NRF51822 chip development and design, It can
collect temperature of the surrounding environment and recording and preservation of
historical data, can store up to 12000 pieces temperature data, Bluetooth 4.0 can be
downloaded over the phone APP,to achieve full stage real-time temperature recording.
It has the small size, light weight, easy to carry, high accuracy and other
characteristics, widely used in various other areas of refrigerated storage and transport,
archives, experimental (test) rooms, museums and other temperature testing.
2 Applications
1. Refrigerated storage and transportation;
2. Archives;
3. Experimental (test) rooms;
4. Workshop;
5. Museums;
6. Pharmaceutical environment;
7. Fresh transport.
3 Product Features
1. The high precision and high stability;
2. Bluetooth 4.0;
3. The long-distance wireless communication;
4. Built-in high sensitivity NTC temperature sensor;
5. Real-time display temperature;
6. Can store 12000 temperature data;
7. You can set the alarm temperature range;
8. The temperature graph can be automatically generated in the APP;
9. Can choose time to query data, the stored data can be saved in history;
10. Temperature data can be generate a PDF/CSV report and sent to specified email;
11. By pairing Bluetooth printer to print the data report;
12. Can by OTA update version.

4 Product specification
Item
Specification
Frequency signal transmission
2.400 - 2.4835GHz
Protocol
Bluetooth 4.0
Modulation
GFSK
Transmission interval
2S
Internal battery
CR2450,550mAh/3V
Output power
-4dBm, adjustable
Maximum transmission distance
55 meters（-4dbm）
Storage
can store 12000 pieces data
Battery life
1 year (depends on working mode,can replace
battery)
Net weight
25g
Dimension
50mm*35mm*15mm
Temperature detecting range
-25℃~+60℃
Temperature detecting accuracy
±0.5℃(-20℃~+40℃),±1℃(Other temperature )
5 Caution
1,Away from metal objects, not placed in a sealed metal and small space;
2,Note that the distance between the TZ-BT05 and the receiver to ensure the reception
accuracy;
3, Away from water and corrosive materials.
6 Switch Instructions
Device status
Operation
LED light instruction
Instructions
Turn on
Under unopened state,
long press button for 3
seconds
Flashes continuous 3s on,
then flashes once every 10
seconds
Data logger starts,
start the real-time
temperature record
Turn off
Open state, long press the
button for 3 seconds
Flashes 5 times, then off
Close data logger,
keep record of
temperature data

7 APP software
‘Temperature data logger’ is a free mobile applications which provided by our
company to the users, can connect the BT05 through the Bluetooth of the mobile
devices and do the settings, data transmission, recording, synchronization, send to
email. Apply the Bluetooth BLE way, so you can use Android, IOS phone for
temperature monitoring.
7.1 Android phone ‘temperature data logger’ App use.
Client can download App by scan the QR code below:
Open the ‘Temperature data logger’ software, the first to see is the scan code interface;
there are three interface buttons, they are ‘real time data’, ‘data extraction’,
‘Configure Devices’; and the upper-left corner of the menu button. Whether you need
to enter which interface of this three interface, devices are required SN code, SN code
can be scanned,entered directly using the phone keypad,also can directly click Real
time/Query/Configure and see the device list:
Note: 1. One mobile phone APP only can scan 300 devces;
2. The mobile phone size must more than 4.7 and the resolution must more than
1280*720

Press the Menu key to query historical data extraction, pairing a Bluetooth printer,
update the firmware by OTA and inspection equipment, as shown below:

Historical records which stores all the history report,you can delete the report when
you press the report and hold on for a while.
Select the matching printer, print history report data:
Inspection tool can check the phone and machine information and the connection.

Click on the lower left corner of the set key, can see the software Settings, the system
time zone, temperature unit, download the firmware update and checker.
Can be set up mobile phone connection timeout time machine:

Can set the local time zone, the PDF/CSV report will become the current time:
Can set the temperature of the unit you need:
BT05_V11 and above version have OTA function, choose the firmware update, the
latest version on the server can be detected and downloaded to mobile phones, then
choose the need to update he machine ID, input the password, you can update to the
latest version, when update is completed you will be prompted to update successful.

7.1.1 Configure logger
After entering the SN code or scanning device , or directly click ‘Configure Devices’
and select the device, on the home page, or enter the configuration interface, as shown
below:
The interface can be configured BT05 password(6 byte), if the transmit
power(-30~4dbm), Normal/Alarm storage space(10~3600s), and the upper and lower
temperature limits(-25~60°C), empty stored data .The appropriate value of the
transmit power can be selected in the drop-down list; storage interval and alarm
settings directly enter numbers according to individual needs; memory is cleared, you
can choose to open or close(open will clear historical data). According to individual
requirements click Save Settings then can write in, if save successfully, will be
prompted the ‘Save Configuration successful.’the‘Default Setting’ button will reset
the device to default.
Note: the above BT05_V6 version can be set device name(no more than 7 byte), note
and description(no more than 20byte),BT05_V11 and above version have OTA
function, BT05_V12 and above versions have selected time quick query data model.

7.1.2 Real time data
‘Real time data’ displays the device name,real-time temperature and power, the
interface for viewing real-time temperature, if the temperature exceed the limits then
the figure change to be red, or else black font, this interface does not provide editing
function . As shown below:
7.1.3 Query data
‘Query Data’ screen, can choose extraction time,(BT05_V12 and above versions have
this function), displays SN code,Storage interval,Alarm settings,the total number of
data recorded ,the maximum/minimum/Avg/MKT temperature during recording, start
time, end time, total time,temperature graph and Bluetooth printing, the interface is
mainly used for reading temperature data recorded in a specific time period, the same
as the historical record,the report includes data report, data record, temperature
chart,set report,send report and print report,As shown below:

7.1.4 History record
Every click on the "query data", the data will be stored in the historical data ,you can
into the historical record, the report includes data report, data record, temperature
chart,set report,send report and print report, as shown below:

Note: Red line: high temperature threshold,blue line: low temperature threshold
In the report Settings can be set up report name, comment and description,also can be
directly set in configure logger, as shown below:

In “send report” can be set up to receive email, the first please set the email account
on the mobile,click send,you can change the report start and end time and set the
graph scaling,click confirm, it is will generate PDF/CSV files and into write email,
you can input mail content, red box for sending, click it, the PDF/CSV report will be
sent to the designated email,as shown below:

Can be in the specified mailbox to see to this email and generate PDF/CSV report,as
shown below:

7.2 IOS system ‘temperature data logger’ App use.
Client can download App by App Store :
Search: Humiture Recorder
Open the ‘Temperature data logger’ software, the first to see is the scan code interface;
there are three interface buttons, they are ‘Real time’, ‘Query’, ‘Configure’; and the
upper-right corner of the search button. Whether you need to enter which interface of
this three interface, devices are required SN code, SN code can be scanned or entered
directly using the phone keypad or also can directly see equipment list after clicking
on search.
As shown below picture:
Note: 1. One mobile phone APP only can scan 300 devices;
2. The mobile phone size must more than 4.0 and more than the IPhone5 mobile
phone,suggest that it is best to use the IPhone6 above, to ensure smooth operation

BT05_V11 and above version have OTA function, choose the firmware update, the
Choose the firmware update, the latest version on the server can be detected and
downloaded to mobile phones, then choose the need to update the machine ID, input
the password, you can update to the latest version, when update is completed you will
be prompted to update successful.
7.2.1 Configure logger
After entering the SN code or scanning device or clicking search on the home page,

will enter the configuration interface, as shown below:
‘Setting’ The interface can be configured BT05 transmit power, Normal/Alarm
storage space, and the upper and lower temperature limits, empty stored data .The
appropriate value of the transmit power can be selected in the drop-down list;storage
interval and alarm settings directly enter numbers according to individual needs;
memory is cleared, you can choose to open or close(open will clear historical data).
According to individual requirements click Save Settings then can write in, if save
successfully, will be prompted the ‘Save Configuration successful.
7.2.2 Real time data
‘Real time data’ displays the device name, real-time temperature and power, the
interface for viewing real-time temperature, if the temperature exceed the limits then
the figure change to be red, or else black font, this interface does not provide editing
function . As shown below:

7.2.3 Query data
‘Query Data’ screen, can choose extraction time,(BT05_V12 and above versions have
this function), displays SN code, Storage interval, the total number of data
recorded ,the maximum and minimum temperature during recording, start time, end
time, temperature chart ,send report and Bluetooth printing, the interface is mainly
used for reading temperature data recorded in a specific time period. There have send
report and print report function(Please don't let the screen lock screen,or query will
interrupt), As shown below:

7.2.4 History data
Every click query data, stored data will be stored in a history report, can enter the
history report to see.
And query data, the same history report includes data record, temperature and chart
and send report and print reports, as shown in the figure below:

In sending report can be set receive email, the first please set the email account on the
mobile,click send, can generate HTML/CSV form the report and sent to email
address: