U-prox Smartline mini User manual

U-Prox SL mini

VERSATILE MINIATURE READER

U-Prox SmartLine

NEW GENERATION OF READERS

• mobile credentials

• NFC and 2.4 GHz radio

• adjustable 2.4 GHz distance (0.1 - 15 m)

• Mifare Plus SL1/SL3 and Mifare Classic

• supports multiple formats of 125 kHz RFID

• smartphone adjustable

• adjustable Wiegand interface

• convinient and safe

• simple and convenient installation

• IP65 degree of protection

The reader is supplied without the engineering password for programming

specified. To connect and (re) set the password — connect inputs D0

(green) and D1 (white) with each other and apply power to the reader.

Reader supports 3 operation modes for smartphones with U-Prox ID:

• "Door-Proximity" – 10-20 cm, reader activates by built-in proximity

sensor. Recommended for double-sided doors and turnstiles

• "Door" - up to 60-70 cm

• "Barrier/Gate" - adjustable range of interaction from 1 to 15 m.

Read range 2-5 cm. Recommended for double-sided doors and turnstiles.

Easy connection

Mobile Apps

Integration

Mifare® и Mifare®Plus

via NFC for Android only

via

2.4 GHz radio

for Apple and Android

Seamless and easy connection to existing and new access systems, due to

the Wiegand 26, 32, 34, 37, 40, 42, 56, 58, 64 bit interfaces, Wiegand with

automatic selection, RS-232 and TouchMemory supports.

RS-232 protocol for integration into arbitrary systems.

Free mobile application U-Prox Mobile ID receives, stores and transmits

mobile credential U-Prox ID between the reader and the smartphone.

With the free mobile application U-Prox Config, the reader can be

completely adjusted — from the indication to the encryption modes.

The adjustable versatile SmartLine (SL) reader for mobile credentials and

proximity identifiers in conjunction with the U-Prox Mobile ID application

and U-Prox IDs allow any access control system to use smartphones as

access system credentials.

U-Prox ID

Digital personal mobile credential. It is processed and stored in the user's

smartphone using the U-Prox Mobile ID application. It can be transferred

over NFC and/or 2.4 GHz radio between the reader and the smartphone.

Operates with ISO14443A identifiers, supports SL1 and SL3 modes for

Mifare®Plus. Read range — up to 5 cm.

Reads encrypted identifiers with static or diversified key and with an

arbitrary card number.

Simultaneous use of five encryption profiles.

RFID, 125 kHz

Supports RFID 125 kHz - EmMarine and other formats.

NFC, Mifare and RFID 125 kHz - up to 5 cm, 2.4 GHz radio - adjustable 10 cm - 15 m

Benefits

Wiring Reader Installation

black, light-gray

45 х 80 х 12.5 mm

70 g

Wiring

8 wire cable, maximum distance to panel - up to 150 m for Wiegand interface,

up to 30 м m for TouchMemory interface

The reader connection wires functions are listed in the table. We recom-

mend to use multi-core signal cable with 0.22 mm�cross-section of each

wire between reader and panel.

Wiegand RS232 TouchMemory

Data0 (WD0)

Data1 (WD1)

+V,

12 VDC

GND

Red Led

Green Led

Beep

Hold/Sync

iButton

Red Led

Green Led

Beep

Hold/Sync

Color

Green

White

Red

Black

Brown

Orange

Blue

Yellow

Reader connection to the panel with twisted pair.

Reader turns to the hold mode while yellow wire is shorted to ground and

does not read any identifiers.

It is prohibited to supply the external voltage to the yellow wire!

(+1 2 V)

(G ND)

iButton

data

GND

TouchMemory (iButton)

(D0)

(Data 0)

GND

(Data 1 )

Wiegand

(G ND)

Reader

Black (Ground)

Green

White

Black

Red

Green

Reader (Ground)

Installation on the metal surfaces may cause decrease of reading range.

Do not place readers closer than 20 cm one from another.

It is possible to install two readers at a distance 10-15 cm of each other

when their yellow wires (Hold/Sync) interconnected. This synchronizes the

work of the readers, they will work alternately.

0. Make small recess or hole (diameter is 14 mm) to connect cable under

the reader's case

1. Loosen the screw at the bottom of the reader

2. Remove the top cover, remove the back plate

3. Mount the back plate of reader on the wall using supplied plastic dowels

and screws

4. Carry out wiring to the control panel

5. Insert the reader in the back plate

6. Place the top cover and tighten it with a screw

U-PROX.COM

U-Prox SmartLine

NEW GENERATION OF READERS

Read range

Case material

ABS+PC plastic

Color

Dimensions

Weight

Ambient

IP65, -40°С . . . +60°С

Power supply

RFID, 125 kHz

ASK and FSK

Mifare®, 13.56 MHz

ISO14443A: Mifare®Standard, Mifare®Hi-Memory, Mifare®Ultralight, Mifare®Classic

1K/4K, Mifare®Classic 7UID, Mifare® Plus SL1 and SL3

NFC, 13.56 MHz

ISO 14443/15693

Interfaces

Wiegand 26, 32, 34, 37, 40, 42, 56, 58, 64 bits,

Wiegand Auto, RS-232 and

TouchMemory

+9. . . +15 VDC, max current- up to 80 mA

Voltage ripple - up to 500 mVp-p

Limited Warranty

Manufacturer warrants that for a period of eighteen months from the date of purchase, the product shall be free of defect in materials and workmanship under normal use and that in fulfillment of any

breach of such warranty, Integrated Technical Vision ltd. shall, at its option, repair or replace the defective equipment upon return of the equipment to its repair depot. This warranty applies only to

defects in parts and workmanship and not damages incurred in shipping or handing, or damages due to causes beyond the control of Manufacturer such as lightning, excessive voltage, mechanical

shock, water damage, or damage arising out of abuse, alteration or improper application of the equipment.

The foregoing warranty shall apply only to the original buyer, and is and shall be lieu of any and all other warranties, whether expressed or implied and of all other obligations or liabilities on the part

of Manufacturer This warranty contains the entire warranty. Manufacturer neither assumes, nor authorizes any other person purporting to act on its behalf to modify or to change this warranty, nor to

assume for it any warranty or liability concerning this product.

In no event shall Manufacturer be liable for any direct, indirect or consequential damages. Loss of anticipated profits, loss of time or any other losses incurred by the buyer in connection with the

purchase, installation or operation or failure of this product.