UbiBot WS1 Pro User manual

E-mail: [email protected]
Website: www.ubibot.io
Manufacturer: Dalian Cloud Force Technologies CO., LTD

WS1 Pro – the Smartest Multi-Sensor IoT Device
USER GUIDE
www.ubibot.io

CATALOG
INTRODUCTION
TECHNICAL SPECIFICATIONS
TECHNICAL HIGHLIGHTS
DEVICE OPERATIONS
DATA SYNC MODES
APP INSTALLATION
WIFI SETUP
MOBILE DATA* SETUP
DATA EXPORTATION VIA PC OFFLINE TOOLS
ERROR CODES
TROUBLESHOOTING
PRODUCT CARE
WARRANTY INFORMATION
WARRANTY CARD
REPAIR HISTORY
01
04
05
06
08
09
10
13
15
16
18
22
23
24
25

INTRODUCTION
01
Depending on the specific model purchased.
The UbiBot® WS1 Pro is a smart mul-sensor device with both WiFi and
mobile data* capabilies. It makes environmental monitoring easier than ever
with its accurate sensors and automac wireless data synchronisaon. The
device comes with a free subscripon to our advanced IoT Plaorm offering
custom monitoring, analysis, reports and alerts. Device readings are displayed
on the built-in LCD screen and are synchronised to the IoT Plaorm. You can
access the data any me using our App or via the web. Some models come
with a built-in RS485 ModBus*.

02
INTRODUCTION
Ambient Light
Sensor
Micro USB 1
Micro USB 1
Micro USB 2
Micro USB 2
Status Indicator
Menu Buon
Power Buon
Used for USB charging or external DS18B20 temperature probe (oponal extra). Oponal
built-in RS485 ModBus
Used for USB charging or external DS18B20 temperature probe (oponal extra). Also provides
PC connecvity.

03
INTRODUCTION Overview of LCD Display
USB Connected
Error Code
SIM Installed*
Mobile Data Strength
Leak Warning*
Disk Formatting
WiFi Setup Mode
Sending Data
Network Connection/
Failure
Temperature
RH
%
Lux
X100
%
usage
EXT1 %EXT2 %
××
SIM
SIM
WiFi Connection/
Failure
Battery Level
Relative
Humidity
Storage
Status
External
Temp/Hum. 1 External Temp/Hum. 2
Ambient Light
Icon indicates optimal temperature and humidity range
(20-26℃, 30-70% RH)
See ISO7730 ASHRAE 55-1992 standard Battery level calculated based on 4
standard 1.5v AA alkaline batteries

04
TECHNICAL SPECIFICATIONS
WiFi, 2.4GHz, channels 1-13
Flame resistant ABS + PC
4.96'' x 0.88'' x 3.38''
Built-in Memory: >300,000 sensing data
℃, 10-90% RH
Micro USB power (DC 5V/2A)
Supports Micro SIM card (15mm x 12mm x 0.8mm)
SIM

05
TECHNICAL HIGHLIGHTS
The UbiBot WS1 Pro uses state-of-the-art industrial-grade sensors from
Sensirion and Texas Instruments. The device integrates these sensors to create
①Quoted temperature precision applies between 0-60℃; ② Quoted precision for temperature of 25℃
Otherwise the precision is ±4% RH. ③ Quoted precision applies when light level >40 lux.
on page 04.
Temperature Sensor
Precision ± 0.3℃①
Range -20 to 60℃
Humidity Sensor
Precision ± 3%RH
Range 0—100%
Ambient Light Sensor
Precision ± 2%③
Range 0.01—83K lux
Supports external waterproof
DS18B20 temperature probe
(optional extra).
RS485 communication via
built-in ModBus.
Accurate
and reliable
environmental
monitoring

06
DEVICE OPERATIONS
Switch On
Switch Off
WiFi Setup Mode
Manual Data Synchronisation
To switch the device on, press and hold the power buon for 3 seconds unl
the indicator starts blinking green. Release the buon and the indicator will
turn off aer a couple of seconds. The device is now on.
To switch the device off, press and hold the power buon for 3 seconds. The
indicator will flash red once and the device is now off.
With the device switched on, press and hold the menu buon for 3 seconds.
The indicator will start flashing alternate red and green and the AP icon will dis-
play on the screen. Release the buon at this point.
With the device switched on, press the power buon once to trigger a manual
data sync. The indicator will flash green while the data is being transferred. If
the server cannot be contacted, the indicator will flash red once.

07
DEVICE OPERATIONS
Reset to Default Settings
Switch On/Off Voice Guide
Display Backlight
Toggle Celsius or Fahrenheit
IMPORTANT
ALL STORED DATA WILL BE LOST IF YOU RESET YOUR DEVICE TO DEFAULT SETTINGS!
REMEMBER TO SYNCHRONISE THE SENSING DATA TO THE UBIBOT®IoT PLATFORM OR EXPORT THE DATA TO
YOUR COMPUTER BEFORE RESETTING IT.
Switch the device off. Now press and hold the menu buon and power buons
together for at least 8 seconds. Release the buons when the indicator is con-
stantly flashing red.
Press the menu buon twice in quick succession to enable or disable the voice
guide. This will also refresh the last sensing data.
Pressing either of the buons will switch on the display backlight for a short
me.
Press the power buon twice to toggle between displaying Celsius or
Fahrenheit.

08
DATA SYNC MODES
The device includes a SIM card
slot to allow mobile data sync if
WiFi is unavailable.
The device supports fast,
secure data sync over WiFi
using 2.4GHz, channels 1-13.
Depending on the specific model purchased.
Sync via Mobile Data*
Automatic Network Selection Direct Data Access without Network
Sync via WiFi
The device can preferenally
connect to WiFi if both WiFi and
mobile data are available. This
saves you monthly data.
The device connues to collect data even
without a network connecon. When the
network becomes available, it will sync the
data. Alternavely you can connect to your
PC via USB1 to manually export the data.

09
App INSTALLATION
Download the App from www.ubibot.io/setup
Or
Search for “UbiBot” on the App Store or Google Play.
Download the Tool from www.ubibot.io/setup
(The UbiBot App requires Android 6.0+, iOS 9.0+)
(The PC Offline Tools needs Winows 7+)
1
2ＰＣ Ｏｆｆｌｉｎｅ Ｔｏｏｌｓ Ｉｎｓｔａｌｌａｔｉｏｎ
Please note that this tool is specially used for offline data exportaon and pro-
fessional use.

10
Device Management
Launch the App, register an account if needed and log in. On the home screen
click the “+” to add your device. Scan the QR code on the back of the device,
or manually enter the serial number.
WiFi SETUP
Add your device Scan the QR code

11
WiFi SETUP
ＳＴＥＰ２．
Put your device into WiFi setup mode (see p.06). The indicator should flash
alternately red and green and the AP icon is shown on the screen.
ＳＴＥＰ３．
The device will ask you to enter your
WiFi password. Check that the correct
SSID is selected and enter the password.
The App will now prompt you to go to
your phone sengs screen. Change to
the UbiBot-xxx network and return to
the App.
ＷＬＡＮ
Ｕｂｉｂｏｔ－５０８４６
ＷＬＡＮ
Next Step
Serial No.
SSID
Password

12
The device will now complete the setup process, register with the server and
you entered the correct WiFi details in step 3.
Ｄｅｖｃｉｅ Ｓｅｔｕｐ
Ｓｕｃｃｅｓｓｆｕｌ！
WiFi SETUP

13
MOBILE DATA*SETUP
With the device off, insert a Micro SIM card into the slot in the direcon shown
(with the notch facing out and the silver contacts downwards). Now switch the
device on.
Ｍｉｃｒｏ
ＳＩＭ
Ｍｉｃｒｏ ＳＩＭ Ｓｌｏｔ
Insert a Micro SIM card into the slot
＊Depending on the specific model purchased.

14
MOBILE DATA*SETUP
Launch the app, register if needed and log in. On the main screen, click the “+”
to add your device. Scan the QR code on the back of the device, or manually
enter the serial number.
Please select your operator and make sure the APN info. is correct.
Now follow the onscreen instrucons and the device will automacally con-
tact the server and synchronise over mobile data. NB, if you have no data
allowance on the SIM card, this step will fail.

With the device switched on, use the Micro USB cable provided to connect
your device to the computer. You can now perform a data export to your com-
puter using the PC Offline Tools.
Note: only USB1 supports PC connecvity.
15
DATA EXPORTATION VIA PC OFFLINE TOOLS
My Device WiFi SSID
Device Name
Latest Data
Product ID ubibot-ws1p-io
Storage Used
Network Usage
Export Data
WiFi Password
Encryption Mode
Serial No.: 42H0WS1Pro
Channel ID: 335
0%
0B/20G
0B/20G

16
ERROR CODES
０１
０２
０３
０４
０５
System Protecon.
Please follow the instrucons to properly configure the device.
Unconfigured devices will revert to system protecon mode to save power.
WiFi Connecon Failed
Please refer to the Troubleshoong secon 4 on page 21.
Failed to Connect to Server
Please refer to the Common Qesons at www.ubibot.io/category/faqs.
Device Acvaon Failed
Please refer to the Troubleshoong secon 1 on page 18.
Data Save Failure
This can happen when there is a power disrupon while saving data when
the power is disrupted while data is being saved.

17
ERROR CODES
Incorrect Data Format
This can happen when there is a power disrupon while saving data.
Data Sync Failed
Please refer to the Troubleshoong secon 2 on page 19.
No SIM Card Found
Please check the SIM card is correctly inserted.
Mobile Data Network Failure
Please check your SIM card is set up correctly and has been acvated.