Uclear Motion Series User manual

USER MANUAL
V1.1

INDEX
PACKAGE CONTENTS; REPLACEMENT ACCESSORIES
DEVICE OVERVIEW
LED INDICATOR OVERVIEW
SPEAKER INSTALLATION
CONTROLLER INSTALLATION
PHONE PAIRING; UPAIR UNIVERSAL DEVICE PAIRING
CLEARLINK MOBILE APP
INTERCOM PAIRING: MOTION MESH UNITS
INTERCOM PAIRING: MOTION WITH AMP SERIES
INTERCOM PAIRING: CROSS-BRAND PAIRING / UNIVERSAL INTERCOM
INTERCOM CONTROLS
VOICE CALLING / PHONE CALLS
MUSIC CONTROLS
GESTURE SENSOR
MUSIC SHARING
UCOMMAND: VOICE COMMANDS- MOTION DEVICE
UCOMMAND: VOICE COMMANDS- APPLE SIRI / GOOGLE VOICE
FIRMWARE UPDATES
USAFE IMPACT SENSOR & CONTACT ALERT (FEATURE HIGHLIGHT)
3-BUTTON RESET; REBOOT
TECHNICAL SPECIFICATIONS
WARRANTY; SUPPORT
IMPORTANT NOTICES
1,2
3
4
5
6,7
8
9,10
11
12
13
14
15
16,19
17-19
20
21
22
23
24
25
26,27
29,35
28-38

PACKAGE CONTENTS
PACKAGE CONTENTS
2. #111037
Pulse Pro 2.0 Premium Speaker/Mic Kit (USB-C).
(Mounting Kit Included)
1. UCLEARTM Motion Series Controller
1

PACKAGE CONTENTS
PACKAGE CONTENTS
5. #111039
Universal Helmet Speaker Mounting Kit
6. #11002
Temporary / Removeable Mount for
HBC, AMP & MOTION Series
9. #11005
UCLEAR DC Car Charger Adapter
7. #11001
Classic Permanent Mount for
HBC, AMP & MOTION Series, 2-PK
8. #111042
Universal Dual Port AC / USB
Charge Adapter (2.1A & 1A ports)
4. #111041
USB-C Charge / Data Cable for
MOTION Series Only
3. #111040
Permanent Mount for MOTION Series Only
2

POWER Button
LED Indicator
Gesture Sensor
UP Button
QUICK ACCESS Button
USB-C
DOWN Button
3
device overview
device overview
INTERFACE OVERVIEW

device overview
device overview
BLUE
GREEN
Blinking - Power on state
- Call in progress
Solid - Battery fully charged
Blinking - Intercom connected
Alternate - Bluetooth pairing
Blinking mode
- Incoming call
BLUE / RED
LED INDICATOR
RED
Blinking - Crash detected
CHARTREUSE
Blinking - Powering off
- Battery low
Solid - Battery charging
PURPLE
Blinking - Intercom pairing
mode
Solid - Battery faulty
TURQUOISE
Blinking - Music/intercom
overlay
4

installation on helmet
installation on helmet
SPEAKER INSTALLATION
FULL FACE / MOTOCROSS HELMET OPEN FACE / MODULAR HELMET
Using included speaker mounting kit, locate speakers & mics
per illustration.
For best performance, adjust center of speakers directly over
ear canals.
Locate the mics behind cheek pads, aligned with mouth,
using the included slotted small mounting rounds. Avoid
either covering the mics too tightly or placement on air vents.
Using included speaker mounting kit, locate speakers & mics
per illustration.
For best performance, adjust center of speakers directly over
ear canals.
Using small slotted mounting rounds, locate mics under liner
in brim of helmet, aligned between temples and outside of
eyebrows. Avoid placement in air vent channels.
5

Ensure mounting area is
cleaned of any dust or oils.
*Determine optimal mount
location. Peel off protective
film from adhesive and
press down hard.
Dock the controller to the
mount. Align the rails
and slide down into place.
You should hear a“click”
when properly secured.
*Plug speaker USB cable
in all the way for a tight
& weatherproof connection.
Tuck excess wire slack into
the helmet lining or behind
cheek pads.
CONTROLLER INSTALLATION
installation on helmet
installation on helmet
*New MOTION mount shown. Classic Mount (included) is also compatible.
1 2 3 4
6

* Note: Controller should only be placed on left side of helmet.
Optimal location is low, along the jaw-line, near your left ear.
* Note: Insert USB-C connector as shown above
with UCLEAR logo facing front.
CONTROLLER INSTALLATION NOTES
installation on helmet
installation on helmet
7

Power ON State. Press & hold UP & DOWN
until LED blinks blue and red.
Once paired, control unit will blink blue.
Device is ready for calls and media streaming!
*Select the name of the UCLEARTM device purchased
in your mobile device’s Bluetooth pairing screen.
Follow these same steps for universal device
pairing to compatible Bluetooth devices such
as phones, tablets, GPS, OEM systems, MP3
players, and Bluetooth PTT radios.
See page 13 for pairing to other brand
intercom systems.
PAIR DEVICE TO PHONE
PAIR DEVICE TO PHONE
When pairing UCLEARTM to mobile devices you may see an
option with “BLE” added to the device name. Do not
select the “BLE” connection in this step.
Bluetooth List
Motion 6
Available Device
Bluetooth List
Available Device
Motion 6 Connected
1 2
3
8

DOWNLOAD CLEARLINK APP
DOWNLOAD CLEARLINK APP
Download & install CLEARLink
free from App Store (IOS)
or from PLAY Store (Android).
CLEARLink Mobile App provides
access to configuration, preference
settings, wireless firmware
updates, user manual and 1-touch
access to tech support.
If you do not have a smartphone, you
can still place calls and stream media
from Bluetooth enabled phones.
However, CLEARLink is needed for
certain features and device
configuration options to function. For
assistance, contact UCLEARTM Support.
9

PAIR DEVICE TO CLEARLINK APP
PAIR DEVICE TO CLEARLINK APP
* UCLEAR device must be paired to your mobile device before pairing to CLEARLink. Once paired to
CLEARLink, please register your device for warranty and configure your preferences.
Home page Device
Information
Configuration
Connect device
1 2 3 4
10

MESH INTERCOM PAIRING
MESH INTERCOM PAIRING
The first ever mesh intercom network combined with Multi-Hop automatic switching. DYNAMESH pairs with
mesh and non-mesh units, and auto-reorganizes as group riders change positions. This ensures stable and
constant connections over the longest distances allowed by the FCC.
F
E
A
T
U
R
E
N
E
W
LAST MOTION DEVICEANY MOTION DEVICE
Press POWER on any MOTION device to
initiate pairing process. The units will
blink green once they are connected.
The last unit to pair continues to blink
purple for 15 secs before system ends
the pairing process.
Optional: Press POWER once on the last
unit blinking purple to end pairing manually.
ALL MOTION DEVICES ALL MOTION DEVICES
Press and hold QUICK ACCESS
for 5 secs until LED blinks purple.
Verify all units to be paired are
blinking purple before next step.
Power ON State
1 2 3 4
5
x1 x1
11

MESH INTERCOM PAIRING
MESH INTERCOM PAIRING
PAIRING MOTION UNITS WITH UCLEAR AMP SERIES UNITS
Begin with all AMP units in power OFF state, all MOTION units in power ON state.
Next enter paring mode on MOTION unit(s).
Press and hold QUICK ACCESS for 5 secs on
MOTION unit(s) until LED blinks purple.
When all units to be paired are blinking purple, press
POWER on any MOTION unit to initiate paring sequence.
Units will double-blink green as they are connected.
All but 1 unit will be blinking green. Press POWER on
the last unit still blinking purple to end the pairing
sequence. All units should be blinking green.
Start by powering on all AMP units directly into pairing mode
by holding POWER & UP until device(s) blink(s) purple.
21
3 4 5
5x1x1
12

UNIVERSAL INTERCOM PAIRING MODE
UNIVERSAL INTERCOM PAIRING MODE
U-Pair allows universal device pairing to multiple Bluetooth devices at once. Smart phones, smart watches,
tablets, GPS, action cams, OEM systems, and competitors’ comm systems.
Power ON state.
Press & hold QUICK ACCESS for
5 secs until LED blinks purple.
Press POWER on MOTION device. MOTION device
indicator will blink green once connected with
other brand devices.
Go into “Phone Pairing” mode.
MOTION DEVICE OTHER BLUETOOTH
COMMUNICATOR
MOTION DEVICE OTHER BLUETOOTH
COMMUNICATOR
* Illustration only * Illustration only
OTHER BRANDSOTHER BRANDS
OTHER BRANDS
1 32
5x1
13

INTERCOM control
INTERCOM control
Tip: Hold UP arrow 2 secs
to quickly rejoin intercom
group if disconnected.
Press & hold DOWN 2 secs Press POWER 3 times
x3
Press & hold UP 2 secs
CONNECT INTERCOM DISCONNECT INTERCOM MICROPHONE MUTE/ UNMUTE
Tip: You can also connect or
disconnect intercom mode with
voice command “INTERCOM”.
Tip: You can also mute or unmute
microphones with voice command,
“MICROPHONE”.
OR OR OR
22
14

Say “Hello” or “Pick up”
PICK UP INCOMING CALL END OR REJECT A CALL
voice calling
voice calling
x2 x1x1
Press & hold POWER 1 sec
JOIN CALL TO INTERCOM
Press POWER once Press POWER twice
OR
LAST NUMBER REDIAL
Press & hold POWER & UP 1 sec
“Hello” or “Pick up”
Press QUICK ACCESS once and
speak command “REDIAL”
OR
1 1
15

music control
music control
BACK TRACK SKIP TRACK
Press DOWN twice
Press POWER once
STOP/PAUSE MUSIC
Press UP twice
x2
x2
x2 x1
x1
x1
VOLUME UP
VOLUME DOWN
Press DOWN
once per level.
Press UP
once per level.
BUTTON METHOD
Press POWER twice
PLAY/RESUME MUSIC
16

GESTURE SENSOR CONTROL
GESTURE SENSOR CONTROL
Wave across device’s
Gesture Sensor to
issue the commands.
Gesture Sensor
Exclusive gesture control sends out a sensor beam from your MOTION unit allowing simple hand gestures to
command the most common features such as volume and pause/restart music without searching for buttons.
Thick gloves? No problem!
ACTIVATING/DEACTIVATING
GESTURE SENSOR
GESTURE SENSOR POSITION
Power ON State
Press QUICK ACCESS 3 times
Toggle ON/OFF with
CLEARLink Mobile App
x3
F
E
A
T
U
R
E
N
E
W
OR
17

GESTURE FEEDBACK
GESTURE SENSOR CONTROL
GESTURE SENSOR CONTROL
18
Simulates UP button.
Light, quick tap on device.
HIGHER PITCH TONE LOWER PITCH TONE
Simulates DOWN button.
Wave into sensor beam 1”- 4”
(2cm – 10cm) away from device.
2cm – 10cm
0cm – 2cm