Uctronics K0058 User manual

Raspberry Pi
Game Quick-Start Guide
Rev 1.0, Mar 2017

www.uctronics.com
1
Table of Contents
1. Raspberry Pi Start Kits ..................................................................................................................... 2
A. Generation Introduction: ....................................................................................................... 2
B. Package including: ................................................................................................................... 2
2. Assembly: ............................................................................................................................................ 3
A. 32GB Micro SD card Class 10 Pre-Loaded with the dual system............................. 3
B. USB MicroSD Card Reader .................................................................................................... 4
C. Power Supply Adapter Charger 5V 2.5A (US) ................................................................. 5
D. USB cable with ON/OFF switch ........................................................................................... 6
E. ABS Protective Case Enclosure ............................................................................................ 7
F. Premium High Speed HDMI Cable..................................................................................... 8
G. Heatsink kit with Thermal Pad ............................................................................................. 9
H. Raspberry Pi Compatible "SNES" Style USB Gamepad .............................................. 10
3. Installation diagram: ...................................................................................................................... 11
A. Getting started ........................................................................................................................ 12
B. Dual system .............................................................................................................................. 13

www.uctronics.com
2
1. Raspberry Pi Start Kits
A. Generation Introduction:
The Raspberry Pi 3 Starter Kit is a great way to gain a solid introduction to the small, credit-
card sized computer. The starter kit make the Raspberry Pi intuitive and easy to learn.
With this kit, you will be able to get your Raspberry Pi 3 as your own credit card sized
computer, getting started with programming and coding, setting-up the Raspberry Pi as a
game player. So, if you are looking for a new challenge or a way to get in on the RPi craze,
check out the Raspberry Pi 3 Starter Kit!
UCTRONICS team has carefully done the compatibility test for all components, and offer the
plug and play dual boot operation system like Raspbian and Recalbox. Users only need
additional HDMI monitor and keyboard/mice to use this kit as a standard PC desktop or a
game player.
B. Package including:
1pcs 32GB Micro SD card Class 10 Pre-Loaded with the dual system
1pcs USB MicroSD Card Reader
1pcs Power Supply Adapter Charger 5V 2.5A (US)
1pcs USB cable with ON/OFF switch
1pcs ABS Protective Case Enclosure
1pcs Premium High Speed HDMI Cable
3pcs Heatsink kit with Thermal Pad
2pcs Raspberry Pi Compatible "SNES" Style USB Gamepad

www.uctronics.com
3
2. Assembly:
A. 32GB Micro SD card Class 10 Pre-Loaded with the dual
system
This Micro SD Card Bundle for the Raspberry Pi consists of a Micro SD card pre-loaded with
the dual system (Raspbian and Recalbox).
Specification:
Capacity: 32GB
Speed Class 10
Weight: approx 0.2g
Simply plug this SD card into your Raspberry Pi
Fully tested to work with the Raspberry Pi 3 Model B
Pre-Loaded with pre-loaded with the dual system (Raspbian and Recalbox)
Superior Random-Access Performance - Perfect for the Raspberry Pi

www.uctronics.com
4
B. USB MicroSD Card Reader
This is a miniature microSD USB reader. Just slide your microSD card into the inside of the
USB connector, then stick this into a USB port and the card’s contents will pop up on your
computer. Very sneaky - we love it! This little guy is great for pulling data logs off microSD
media. This device is completely plug-and-play, so no drivers needed.
Specification:
TF/microSD/microSDHC Card High-Speed Reader
USB Interface
Removable Cap

www.uctronics.com
5
C. Power Supply Adapter Charger 5V 2.5A (US)
These have a standard USB ‘A’ connector for the output so you can power your Raspberry Pi
through a USB cable. Any device that uses a USB cable for charging or power can be powered
with this supply.
Specification:
Input Voltage: AC100~240V 50/60Hz
Output: DC 5.0v 2500mA (2.5A)
Short Circuit Protection
Overload Protection
Consistent fixed switching voltage
Internal Fuse for Extra Safety
Adapter plug type: US

www.uctronics.com
6
D. USB cable with ON/OFF switch
This Raspberry Pi Micro USB Cable with ON / OFF Switch is specifically designed for Raspberry
Pi. Just press the button to turn your Pi on and off, no need to pull the cable to restart or
reboot your Raspberry Pi, prevent the Raspberry Pi's Micro USB connector from frequent
pulling and inserting the USB cable. 1.5m length Can be used as power supply for the
Raspberry Pi module, not for data transfer use.
Specification:
Tested for Compatibility with the Raspberry Pi
With ON/OFF switch
1.5m Long
Color: Black
Connector Type A: USB
Connector Type B: Micro USB

www.uctronics.com
7
E. ABS Protective Case Enclosure
This enclosure case is elegant, beautiful, and functional for Raspberry Pi 3 Model B.
Made of ultra-durable, super-glossy polycarbonate, it is both good looking and tough
enough to toss into your bookbag or toolbox. It has slim openings for all your cables, an
easy-to-remove beveled slot for your Micro SD card, slots for both your Pi camera and
upcoming display, and a space for your GPIO cable to extend out from the Pi.
Specification:
Durable two part ABS plastic case
Large internal volume for HATs, break-out boards, or heat sinks
Vents on three sides double as fly-through cable ports
Two-section breakout on A/V side for break-out board I/O
Micro SD card access port
Mounting option 1: two M3.5/M3/#6 screws slide into wall mounts for easy removal,
horizontal orientation with A/V side down, 40mm spacing
Mounting option 2: four M3.5/M3/#6 screws through feet from inside for secure mounting in
any orientation, 68.3 x 38.8mm spacing
External dimensions: 96 x 66 x 41mm
Internal volume for breakout boards:
Length: 90.0mm
Width: 60.0mm

www.uctronics.com
8
F. Premium High Speed HDMI Cable
The 1.5m Gold Plated HDMI to HDMI cable is the perfect low cost solution to connecting your
Raspberry Pi to your HDMI monitor or TV.
This is the latest high speed version V1.4 with Ethernet, 3D support!
Specification:
1.5m Long
Flat "Noodle" Type Cable
Tested for Compatibility with the Raspberry Pi
HDMI Male (19 Pin) to HDMI Male (19 Pin)
24k Gold-Plated Contacts Prevents Corrosion for Life-Long Optimum Signal
Transfer
Fully Ethernet and 3D over HDMI enabled (V1.4 Connection)
Supports 4Kx2K, 1080p Resolutions

www.uctronics.com
9
G. Heatsink kit with Thermal Pad
The Raspberry Pi Heat Sink Kit consists of three high quality aluminum heat sinks, each
selected to perfectly match the size of the main heat out-put components on your Raspberry
Pi board. The heatsinks are designed to fit on top of the chip and Ethernet SOC's. Keep your
Raspberry Pi super cool with this Raspberry Pi Heat Sink Kit in stunning silver! Extend the life
of your Raspberry Pi and reduce the risk of hardware failure.
Specification:
3 x Silver Aluminum Heat Sinks.
Compact, and Able to Fit in Most Raspberry Pi Cases (Including the ModMyPi case).
High quality Thermal Adhesive Tape for Easy Application.
Thermal Resistance 25°C/W.
1pcs 9x9x5mm Heat Sink, Floor Thinness:1.6mm, Vane Thickness:0.8mm.
2pcs 14x14x6mm Heat Sink, Floor Thinness:1.1mm, Vane Thickness:0.6mm.

www.uctronics.com
10
H. Raspberry Pi Compatible "SNES" Style USB Gamepad
Get your retro on with the Raspberry Pi compatible SNES style USB gamepad! This is not an
official Nintendo product, but a 3rd party USB type replica of the Super Nintendo/Famicom
unit produced in the early 90's!
The SNES USB controller with eight-way steering wheel and four digital buttons allows you
to enjoy the look and feel of your favorite computer game playing SNES controller. And its
USB connection makes it possible to install PC or Mac.
Specification:
USB Connector
Raspberry Pi Compatible
D-Pad
Buttons: Start, Select, X, Y, A, B, R, L
Cable Length: 1.4m

www.uctronics.com
11
3. Installation diagram:
Figure1.
Figure2.

www.uctronics.com
12
A. Getting started
1. If you have a case, start by installing the Raspberry pi inside the case.
2. Insert a pre-programmed MicroSD card into the MicroSD card slot on the bottom side
of the Raspberry Pi.
3. Connect a USB keyboard and mouse to the USB ports.
4. Connect a HDMI monitor or TV to the Raspberry Pi using a HDMI cable. Ensure your
monitor or TV is turned on and that you have selected the correct input.
5. Once all connections have been made, it is now time to connect the MicroUSB Power
Supply to the board. When the power is connected, the Raspberry Pi will start to boot.

www.uctronics.com
13
B. Dual system
The kit default loaded a dual boot system, during booting user can navigate one of the
OS using keyboard Up/Down and select a prefer OS from the following dialog.
Select the Raspbian OS, it will enter into the Raspbian desktop, or else it will enter into
the Recalbox game console.
If you want to switch between the two OS, you need to reboot the system and select the
other one during the boot stage.

www.uctronics.com
14
Raspbian desktop overview
recalbox game console over view
NOTE: Our gamepad has been configured in the system, See the following diagrams for
reference:
For more information about how to use
recalbox
, please refer to website:
http://www.recalbox.com/blog
Table of contents
Other Uctronics Microcontroller manuals
Popular Microcontroller manuals by other brands

Texas Instruments
Texas Instruments OMAP-L138 DSP + ARM9 quick start guide

Dialog Semiconductor
Dialog Semiconductor DA1468 series user manual

Lattice
Lattice Power Manager II Hercules quick start

NXP Semiconductors
NXP Semiconductors P89LPC9321 UM10310 user manual

NXP Semiconductors
NXP Semiconductors IOTZTB-DK006 user guide

Holtek
Holtek HT32 user guide