
ASSEMBLY INSTRUCTIONS
Place table top on the floor upside down, using a blanket or
carpet to avoid scratching.
Align the ends of the stretchers with the joints of the legs and
fasten them together with 4 hex bolts.
Fasten the brackets to both sides of the frame using 6M6 screws
and lock washers.Align the frame assembly with the pilot
holes and threaded inserts in the table top.Finally, fasten the
assembly to the threaded inserts in locations shown using the
remaining M6 screws and lock washers.
Fully secure the frame to the table top using the remaining wood
screws and washers.
With a buddy, flip the table back over. Adjust leveling feet until
all feet lay flat on the floor.
1
6
5
4
2
BROA D COMMUNAL 72”BROA D C OMMUNA L 72”BROAD COMMUNAL 72”
BROAD COMMUNAL TABLE 72”
CONTENTS
This page lists the contents included in the box. This product
does require assembly. As you unpack, place the contents on a
carpeted or padded area to protect them from damage. Improper
unpacking can result in personal or property damage.
CONTEN TS
WOOD SCREW - (X8)
HEX BOLTS - (X4)
M6 SCREWS- (X6)
WASHER - (x8) LOCK WASHER - (X6)
ALLEN KEY- (X1)
PHILLIPS HEAD SCREWDRIVER
(NOT INCLUDED)