uhuru MOD MIRROR User manual

[email protected]OM 718 855 6519 UHURUDESIGN.COM
ASSEMBLY INSTRUCTION MOD MIRROR1/2
MOD MIRROR | ASSEMBLY INSTRUCTION
CONTENTS
[1] Mirror
[1] Anti-tip Mounting Bracket
NOT INCLUDED:
[1] Level
[1] Measuring tape
[3] Screws & wall anchors (recommended)
[1] Drill/Screw driver
76"h
Using the level, measuring tape and a pencil, lightly mark a line 76"
off the floor. Aligning the bottom edge of the Anti-tip Mounting Bracket
with the line, fasten to the wall using appropriate hardware.
1
As you unpack, place the contents on a carpeted or
padded area to protect them from damage. Improper
unpacking can result in personal or property damage.
SIDE VIEW

ASSEMBLY INSTRUCTION MOD MIRROR2/2
[email protected]OM 718 855 6519 UHURUDESIGN.COM
Attach Mirror onto the Anti-tip Mounting Bracket.
2
DETAIL SIDE VIEW
This product must be secured to the wall or other
stable surface to prevent tipping. Serious or fatal
crushing injuries can occur from furniture tip-over.
To further reduce the risk of serious injury and death
from tip-overs:
- Never stand on furniture
- Furniture intended for placement on floor
Anti-tip Mounting Bracket
Mirror