uhuru SUMMIT CONSOLE 80" User manual

[email protected] 718 855 6519 UHURUDESIGN.COM
SUMMIT 80”ASSEMBLY AND CARE 1/2
SUMMIT CONSOLE 80" - ASSEMBLY AND CARE
CONTENTS
(1x) Summit Console
(16x) Shelf pins
(4x) Shelf
(2x) Anti-tip cleat
NOT INCLUDED:
(1x) Level
(8x) Wall anchors
(1x) Measuring tape
This page lists the contents included in the box. As you unpack, place the
contents on a carpeted or padded area to protect them from damage. Improper
unpacking can result in personal or property damage.
Place pins at desired height and carefully place shelves on top.
Determine which anchoring hardware is appropriate hardware for your install
location. Different types of walls necessitate different types of hardware.
Anchoring hardware not included.
1
2
B
B

[email protected] 718 855 6519 UHURUDESIGN.COM
SUMMIT 80”ASSEMBLY AND CARE 2/2
205LB
!
3
4
24”
Using a measuring tape and a pencil, mark a line 18.5” off the floor. Aligning
the bottom edge of the anti tip cleat with the line and affix to the wall using
appropriate hardware.
Using a level as a guide, adjust the leveling feet by twisting the foot pads until
all feet sit flatly on the floor.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive, oil or
chemical based cleaners. It is recommended to use coasters to protect
surface from heat and water. Do not leave spills unattended.
WARNING
Serious or fatal crushing injuries can occur from furniture tip-over. To help
prevent tip-over, read this entire warning.
This product must be secured to the wall or other stable surface to prevent
tipping.
To further reduce the risk of serious injury and death from tip-overs:
• Never stand on furniture
• Furniture intended for placement on floor
• Do not place items over 300lb on furniture
18.5”