ULTRA-LINK UL-SB10-2.1 User manual

Features:
Specifications:



Quality Soundbar with built-in amplifier
Full audio spectrum performances, ideal for your favourite
entertainment from Mp3, Mp4, CD/DVD movies and digital playbacks.
Quality materials : Only the best components to recreate sound
faithfully across all frequencies.
Package contents:
Soundbar
Output power: 480W (MAX)
Driver Unist: 5090 x 4+ 8"
Frequency response: soundbar: 140Hz-20KHz
subwoofer: 40Hz-150Hz
Separation: ≥40 dB
S / N: ≥55 dB
Distortion: ≤1% (1K, 1W)
Power supply: ~110-240V 50/60Hz
Dimensions: soundbar: L960 x W83 x H66 (mm)
subwoofer: L140 x 260 x H398 (mm)
1 pc
User manual 1 pc
Subwoofer 1 pc
Remote control 1 pc
Audio input cord 1 pc
Warranty card 1 pc
DEAR CUSTOMER:
Thank you for purchasing this product.
Prior to first use, please read the manual carefully.
UL-SB10-2.1
1. The Speaker system is in “ ” (stand by) mode when power on,
with the LED Flashing. Please press the “ ” to select appropriate
source. Keeping the “ ” key pressed for long will put it back in
“ ” (stand by) mode.
* You can toggle through the input modes by pressingthe “ ” key.
“BT” denotes Bluetooth mode. “HD” denotes ARC mode.
“OPT” denotes mode. “ AU ” denotes Audio mode. “USB” denotes
USB card mode.
2. Play/Pause the songs.
3. Long press for volume increase/short press for next track.
4. Long press for volume decrease/short press for prev track.
5. USB Slot.
2.1 Channel Soundbar with Subwoofer
注：A4大小，105g铜版纸彩色双面印刷，根据虚线对折，封面在前.
1. : Power ON or Standby modes.
2. PAIR:
a. Press this key to change frequency point. Long press for 3
seconds to enter the switching frequency point, LED display shows the
current frequency point of CHxx, and short press to switch frequency point.
b. Match ID code : Continuously short press this key for more than 5 times,
LED display shows 1d and flash to enter the code matching status, at this
time, the wireless subwoofer needs to be cut off and restart, LED red
and blue light starts to flash, when the blue light keeps on, the codes
match successfully.
3. MUTE:Turn volume off. Depress again to activate the sound.
4. VOL+: To increase the Volume by short or long press of VOL+.
5. : Play the previous song by pressing " " but not in Audio mode.
6. : Play/pause in USB/BT mode and MUTE in Audio mode.
7. : Play next song by pressing " ", but not in Audio mode.
8. VOL-: To decrease the Volume by short or long press of VOL-.
111111
2
3
4
5
PAIR MUTE
TONE
VOL+
VOL-
(1)
(2)
(8)
(4)
(5)
(9)
(14)
(12)
(3)
(7)
(10)
(11)
(13)
(6)
AUX USB
BTARC OPT
1.
2. PAIR
3. MUTE
4. VOL+
5.
6.
7.
8. VOL-
9. BT
10. ARC
11. OPT
12. AUX
13. USB
14. TONE

Please Note:
9. BT: Bluetooth mode.
Press “BT” button on the remote to convert to Bluetooth input mode, LED
flash fast to search the Bluetooth device. Turn on your mobile Bluetooth
device and search the device name “ UL-SB10-2.1 ”, paired them well.
When you have successfully paired your mobile to the speaker system,
LED flashes slowly. When starting to play your mobile music, LED stopped
flash. The functions as "PREVIOUS/NEXT", "PLAY/PAUSE", can operate
via the front panel. On BT mode, when connecting with mobile, press “ ”
for 3 seconds, bluetooth function can be force-disconnected.
10. ARC: ARC mode.
11. OPT: Optical mode.
12. AUX: Audio input mode.
13. USB: USB mode.
14. TONE: Press it, LED flashes, it enter into treble adjustment status,
can press Vol+/Vol- adjust treble level -6(min)~+6(max). Press it again,
LED flashed 2 times, it enter into bass adjustment status, can press
Vol+/Vol- adjust bass level -6(min)~+6(max).
1. Input Connect to sound sources such as computer, CD player, Mp3, etc.
2. Optical Input.
3. ARC Input.
4. AC Power cord.
5. AC IN: AC Power cord
6. RESET: Press and hold the button at the back plate of subwoofer,
and connect to power at the same time, wait for 5 seconds, then stop
pressing, Subwoofer will be reset.
7. LED:Turn on the red light long, connected successfully long blue light
8. Power ON/OFF: Switch for turning on/off the unit.
05
6 7
06
System Connection Diagram:
Rear panel:
(1) (2) (3) (4)
Soundbar
Subwoofer
(6)(5) (7) (8)
* If the remote control cannot function, it is because the battery of
remote control has been used up. thank you.
Soundbar Place it near the TV or DVD player.
SB-soundbar