Ultra Start 90 Series User manual

WARING: NEVER USE AN AUTOMATIC TRANSMISSION
STARTER IN A MANUAL TRANSMISSION VEHICLE
REV.2011.7.30
AUTOMATIC AND MANUAL TRANSMISSION MODELS*
*MUST USE M SERIES REMOTE STARTER!
Advanced Remote Starters & Vehicle Security Systems
90/ 95 SERIES

90 & 95 SERIES
IMPORTANT NOTES...........................................................................................PAGE 3
QUICK VIEW OPERATIONS LCD 2WAY............................................................PAGES 4-8
LOCK UNLOCK TRUNK START STOP ETC.
SYSTEM OPERATIONS DETAILED...................................................................PAGES 12-16
TEMP START MODE...........................................................................................PAGE 18
TEMPERATURE SETTINGS
TEMP MODE ON/ OFF
RUN TIME AND CLOCK ADJUSTMENT.............................................................PAGE 19
SHOCK SENSOR PROGRAMMING (ALARM MODELS)...................................PAGE 20-21
LCD 2WAY REMOTE...........................................................................................PAGES 22-25
DIAGNOSTICS....................................................................................................PAGE 26
DIAGNOSTICS CHART DIAGNOSTIC MEMORY
WARRANTY.........................................................................................................PAGE 27
CONTACT INFO..................................................................................................PAGE 28
QUICK VIEW OPERATIONS 1WAY REMOTE....................................................PAGES 8-9
LOCK UNLOCK TRUNK START STOP ETC.
QUICK VIEW OPERATIONS LED 2WAY............................................................PAGES 10-11
LOCK UNLOCK TRUNK START STOP ETC.
SERVICE MODE.................................................................................................PAGE 17
OVERRIDE MODE/ SERVICE MODE
PAGER MODE OFF (3295 SERIES) SHOCK SENSOR BYPASS
2WAY FEATURES
90 & 95 SERIES
IMPORTANT NOTES
BEFORE YOU START

90 & 95 SERIES
IMPORTANT NOTES...........................................................................................PAGE 3
QUICK VIEW OPERATIONS LCD 2WAY............................................................PAGES 4-8
LOCK UNLOCK TRUNK START STOP ETC.
SYSTEM OPERATIONS DETAILED...................................................................PAGES 12-16
TEMP START MODE...........................................................................................PAGE 18
TEMPERATURE SETTINGS
TEMP MODE ON/ OFF
RUN TIME AND CLOCK ADJUSTMENT.............................................................PAGE 19
SHOCK SENSOR PROGRAMMING (ALARM MODELS)...................................PAGE 20-21
LCD 2WAY REMOTE...........................................................................................PAGES 22-25
DIAGNOSTICS....................................................................................................PAGE 26
DIAGNOSTICS CHART DIAGNOSTIC MEMORY
WARRANTY.........................................................................................................PAGE 27
CONTACT INFO..................................................................................................PAGE 28
QUICK VIEW OPERATIONS 1WAY REMOTE....................................................PAGES 8-9
LOCK UNLOCK TRUNK START STOP ETC.
QUICK VIEW OPERATIONS LED 2WAY............................................................PAGES 10-11
LOCK UNLOCK TRUNK START STOP ETC.
SERVICE MODE.................................................................................................PAGE 17
OVERRIDE MODE/ SERVICE MODE
PAGER MODE OFF (3295 SERIES) SHOCK SENSOR BYPASS
2WAY FEATURES
90 & 95 SERIES
IMPORTANT NOTES
BEFORE YOU START

Basic Remote Functions
THE LCD REMOTE DISPLAYS THE CURRENT STATUS OF YOUR SYSTEM USING
BOTH ICONS AND TEXT ON ITS UNIQUE LCD DISPLAY.
Basic Remote Functions
LOCK/ ARM ALARM
UNLOCK/ DISARM ALARM
ULTRA
1 2 3 ON OFF
REMOTE START/ STOP
UNLOCK
PROGRAM
STATUS UPDATE/ PGM MODE
*RESERVATION MODE ON M SERIES.
Basic Icon Description
1 2 ICON DESCRIPTION
1- USER MODE ICON
2- FEATURE STATUS
3- RANGE INDICATOR
4- TIMER MODE ICON
5- DISPLAY TEXT
6- PROGRAM MODE ICON
7- LOCK ICON
8- UNLOCK ICON
9- START/RUN ICON
10- LOW TEMP MODE
11- TRUNK RELEASE ICON
TRUNK RELEASE
1 2 ON OFF
4
TEXT–
PROGRAM
6
8 9 10 11
3
5
7
/ START STATUS
#
#
90 & 95 SERIES
LCD 2 WAY REMOTE
PAGE 4
LOCK
UNLOCK
LOCK
UNLOCK
PANIC
LOCK
1
1
1
1
1
1
LOCK - PRESS & RELEASE
UNLOCK - PRESS & RELEASE
LOCK - PRESS & HOLD
4 SECONDS
PRESS AND RELEASE
PRESS AND RELEASE
(WITHIN 2 SECONDS)
LOCK - PRESS & RELEASE
(WHILE ALARM TRIGGERED)
UNLOCK- PRESS AND RELEASE
UNLOCK- PRESS AND AN RELEASE
LOCK THE DOORS & ARM THE ALARM*
*ALARM MODELS ONLY.
1 BEEP
/ 1 BEEP
ACTIVATES THE PANIC MODE FEATURE.
ACTIVATES THE CONSTANT LOCK OUTPUT FEATURE*
*THE LOCK OUTPUT WILL STAY ON FOR 4 SECONDS.
ACTIVATES WINDOW ROLL UP ON SELECT VEHICLES.
SERIES OF
BEEPS
2 BEEPS
PAUSE
1 BEEP
1 BEEP /
2 BEEPS
1 BEEP
PAUSE
1 BEEP
1 BEEP
UNLOCK THE DOORS & DISARM THE ALARM*
*ALARM MODELS ONLY.
TURNS OFF THE SIREN BUT THE ALARM WILL STAY ARMED.
*ALARM MODELS.
TURNS OFF THE SIREN BUT THE ALARM WILL STAY ARMED.
*ALARM MODELS.
ACTIVATES THE DRIVER’S DOOR PRIORITY UNLOCK FEATURE.
MAY REQUIRE ADDITION PARTS OR LABOUR. MUST BE
PROGRAMMED FOR OUTPUT TO ACTIVATE.
DISPLAY BUTTON PRESS AUDIBLE FUNCTION
1
UNLOCK - PRESS & RELEASE
(WHILE ALARM TRIGGERED)
1 BEEP
UNLOCK
TRUNK
1
TRUNK- PRESS AND HOLD
FOR 4 SECONDS
TRUNK- PRESS & RELEASE
ACTIVATES THE TRUNK RELEASE OUTPUT.
*DISARMS ALARM, UNLOCKS DOORS & TRUNK ICON FLASHES
WHEN REMOTE STARTED LCD WILL DISPLAY CURRENT RUNTIME.
1 BEEP
PAUSE
3 BEEPS
90 & 95 SERIES
2 WAY REMOTE OPERATIONS
PAGE 5
10

Basic Remote Functions
THE LCD REMOTE DISPLAYS THE CURRENT STATUS OF YOUR SYSTEM USING
BOTH ICONS AND TEXT ON ITS UNIQUE LCD DISPLAY.
Basic Remote Functions
LOCK/ ARM ALARM
UNLOCK/ DISARM ALARM
ULTRA
1 2 3 ON OFF
REMOTE START/ STOP
UNLOCK
PROGRAM
STATUS UPDATE/ PGM MODE
*RESERVATION MODE ON M SERIES.
Basic Icon Description
1 2 ICON DESCRIPTION
1- USER MODE ICON
2- FEATURE STATUS
3- RANGE INDICATOR
4- TIMER MODE ICON
5- DISPLAY TEXT
6- PROGRAM MODE ICON
7- LOCK ICON
8- UNLOCK ICON
9- START/RUN ICON
10- LOW TEMP MODE
11- TRUNK RELEASE ICON
TRUNK RELEASE
1 2 ON OFF
4
TEXT–
PROGRAM
6
8 9 10 11
3
5
7
/ START STATUS
#
#
90 & 95 SERIES
LCD 2 WAY REMOTE
PAGE 4
LOCK
UNLOCK
LOCK
UNLOCK
PANIC
LOCK
1
1
1
1
1
1
LOCK - PRESS & RELEASE
UNLOCK - PRESS & RELEASE
LOCK - PRESS & HOLD
4 SECONDS
PRESS AND RELEASE
PRESS AND RELEASE
(WITHIN 2 SECONDS)
LOCK - PRESS & RELEASE
(WHILE ALARM TRIGGERED)
UNLOCK- PRESS AND RELEASE
UNLOCK- PRESS AND AN RELEASE
LOCK THE DOORS & ARM THE ALARM*
*ALARM MODELS ONLY.
1 BEEP
/ 1 BEEP
ACTIVATES THE PANIC MODE FEATURE.
ACTIVATES THE CONSTANT LOCK OUTPUT FEATURE*
*THE LOCK OUTPUT WILL STAY ON FOR 4 SECONDS.
ACTIVATES WINDOW ROLL UP ON SELECT VEHICLES.
SERIES OF
BEEPS
2 BEEPS
PAUSE
1 BEEP
1 BEEP /
2 BEEPS
1 BEEP
PAUSE
1 BEEP
1 BEEP
UNLOCK THE DOORS & DISARM THE ALARM*
*ALARM MODELS ONLY.
TURNS OFF THE SIREN BUT THE ALARM WILL STAY ARMED.
*ALARM MODELS.
TURNS OFF THE SIREN BUT THE ALARM WILL STAY ARMED.
*ALARM MODELS.
ACTIVATES THE DRIVER’S DOOR PRIORITY UNLOCK FEATURE.
MAY REQUIRE ADDITION PARTS OR LABOUR. MUST BE
PROGRAMMED FOR OUTPUT TO ACTIVATE.
DISPLAY BUTTON PRESS AUDIBLE FUNCTION
1
UNLOCK - PRESS & RELEASE
(WHILE ALARM TRIGGERED)
1 BEEP
UNLOCK
TRUNK
1
TRUNK- PRESS AND HOLD
FOR 4 SECONDS
TRUNK- PRESS & RELEASE
ACTIVATES THE TRUNK RELEASE OUTPUT.
*DISARMS ALARM, UNLOCKS DOORS & TRUNK ICON FLASHES
WHEN REMOTE STARTED LCD WILL DISPLAY CURRENT RUNTIME.
1 BEEP
PAUSE
3 BEEPS
90 & 95 SERIES
2 WAY REMOTE OPERATIONS
PAGE 5
10

AUX 1
1
PRESS AND HOLD TOGETHER
1 BEEP /
3 BEEPS
AUXILIARY 1 OUTPUT. ACTIVATES AS LONG AS THE BUTTONS
ARE HELD (5 SECONDS MAX).
DISPLAY BUTTON PRESS AUDIBLE FUNCTION
AUX 2
1
PRESS AND HOLD TOGETHER
1 BEEP /
2 BEEPS AUXILIARY 2 OUTPUT. DEFAULT 5 SECOND OUTPUT.
#
*THE AUXILIARY OUTPUTS CAN BE USED TO ACTIVATE ADDITION FEATURES SUCH AS
POWER SLIDING DOOR CONTROL, SUN ROOF OPEN/CLOSE OR EVEN WINDOW ROLL-UP.
THESE FUNCTIONS ARE OPTIONAL AND MAY REQUIRE ADDITION PARTS OR LABOUR.
MUST BE PROGRAMMED FOR OUTPUTS TO ACTIVATE.
M-1234
1
MELODY
ENTERS REMOTE PROGRAM MODE.
SEE REMOTE PROGRAM MODE SECTION OF THE MANUAL FOR MORE DETAILS.
*REMOTE PROGRAM MODE ALLOWS THE USER TO SET OR CHANGE DEFAULT FEATURES OF
THE SYSTEM SUCH AS TIMER MODE, PAGER MODE, VALET MODE. SEE REMOTE PROGRAM MODE
FOR MORE PROGRAMMABLE OPTIONS.
PRESS & HOLD
#
USER NOTES
STOP
START
1
1
1 BEEP
PAUSE
1 BEEP
1 BEEP
PAUSE
TONE
ACTIVATES THE REMOTE CAR STARTER FUNCTION.
THE DEFAULT RUNTIME IS 15 MINUTES.
TURNS OFF THE REMOTE CAR STARTER.
THE SYSTEM WILL AUTOMATICALLY TURN OFF AFTER THE DEFAULT RUNTIME
(15 MINUTES) HAS EXPIRED.
KEY- PRESS AND HOLD
WHILE VEHICLE IS RUNNING
KEY- PRESS AND HOLD FOR
3 SECONDS TILL REMOTE BEEPS
THEN RELEASE
DISPLAY BUTTON PRESS AUDIBLE FUNCTION
EX RUN
1
1 BEEP
PAUSE
TONE
1 BEEP
PAUSE
TONE
RESETS THE RUN TIME.
THIS FEATURE WILL EXTEND THE CURRENT RUNTIME WHILE THE SYSTEM IS
RUNNING BY THE REMOTE START.
KEY- PRESS & RELEASE
WHILE RUNNING BY STARTER
IDLE
1
ACTIVATES THE IDLE MODE FEATURE.
THE VEHICLE WILL RUN FOR 15 MINUTES WHEN THE KEY IS REMOVED.
KEY- PRESS & RELEASE
WHILE RUNNING BY KEY
TURBO
1
2 BEEPS
ACTIVATES THE TURBO TIMER MODE FEATURE.
THE VEHICLE WILL RUN FOR 2 MINUTES WHEN THE KEY IS REMOVED.
PRESS & RELEASE
WHILE RUNNING BY KEY
IF THE VEHICLE DOES NOT START A START FAULT CODE WILL BE DISPLAYED. THE START FAULT
WILL CLEAR THE NEXT TIME THE SYSTEM IS LOCKED OR UNLOCKED. PLEASE SEE FAULT CODE
SECTION OF MANUAL FOR MORE INFORMATION.
MANUAL TRANSMISSION- RESERVATION MODE MUST BE SET TO REMOTE START THE VEHICLE.
#
2 BEEPS
ACTIVATES THE RESERVATION MODE/ PRESS 2X FOR TURBO.
MANUAL TRANSMISSION ONLY (SEE RESERVATION MODE)
PRESS & RELEASE ONCE
WHILE RUNNING BY KEY
UNLOCK
1
THE REMOTE WILL UPDATE THE CURRENT STATUS, LOCKED OR
UNLOCKED. THEN DISPLAY THE TEMPERATURE AND THEN THE
CLOCK. TO STATUS UPDATE THE RUNTIME PRESS AND RELEASE
THE TRUNK BUTTON.
PRESS & RELEASE FOR
STATUS UPDATE
#2 BEEPS
90 & 95 SERIES
2 WAY REMOTE OPERATIONS
PAGE 6
90 & 95 SERIES
2 WAY REMOTE OPERATIONS
PAGE 7

AUX 1
1
PRESS AND HOLD TOGETHER
1 BEEP /
3 BEEPS
AUXILIARY 1 OUTPUT. ACTIVATES AS LONG AS THE BUTTONS
ARE HELD (5 SECONDS MAX).
DISPLAY BUTTON PRESS AUDIBLE FUNCTION
AUX 2
1
PRESS AND HOLD TOGETHER
1 BEEP /
2 BEEPS AUXILIARY 2 OUTPUT. DEFAULT 5 SECOND OUTPUT.
#
*THE AUXILIARY OUTPUTS CAN BE USED TO ACTIVATE ADDITION FEATURES SUCH AS
POWER SLIDING DOOR CONTROL, SUN ROOF OPEN/CLOSE OR EVEN WINDOW ROLL-UP.
THESE FUNCTIONS ARE OPTIONAL AND MAY REQUIRE ADDITION PARTS OR LABOUR.
MUST BE PROGRAMMED FOR OUTPUTS TO ACTIVATE.
M-1234
1
MELODY
ENTERS REMOTE PROGRAM MODE.
SEE REMOTE PROGRAM MODE SECTION OF THE MANUAL FOR MORE DETAILS.
*REMOTE PROGRAM MODE ALLOWS THE USER TO SET OR CHANGE DEFAULT FEATURES OF
THE SYSTEM SUCH AS TIMER MODE, PAGER MODE, VALET MODE. SEE REMOTE PROGRAM MODE
FOR MORE PROGRAMMABLE OPTIONS.
PRESS & HOLD
#
USER NOTES
STOP
START
1
1
1 BEEP
PAUSE
1 BEEP
1 BEEP
PAUSE
TONE
ACTIVATES THE REMOTE CAR STARTER FUNCTION.
THE DEFAULT RUNTIME IS 15 MINUTES.
TURNS OFF THE REMOTE CAR STARTER.
THE SYSTEM WILL AUTOMATICALLY TURN OFF AFTER THE DEFAULT RUNTIME
(15 MINUTES) HAS EXPIRED.
KEY- PRESS AND HOLD
WHILE VEHICLE IS RUNNING
KEY- PRESS AND HOLD FOR
3 SECONDS TILL REMOTE BEEPS
THEN RELEASE
DISPLAY BUTTON PRESS AUDIBLE FUNCTION
EX RUN
1
1 BEEP
PAUSE
TONE
1 BEEP
PAUSE
TONE
RESETS THE RUN TIME.
THIS FEATURE WILL EXTEND THE CURRENT RUNTIME WHILE THE SYSTEM IS
RUNNING BY THE REMOTE START.
KEY- PRESS & RELEASE
WHILE RUNNING BY STARTER
IDLE
1
ACTIVATES THE IDLE MODE FEATURE.
THE VEHICLE WILL RUN FOR 15 MINUTES WHEN THE KEY IS REMOVED.
KEY- PRESS & RELEASE
WHILE RUNNING BY KEY
TURBO
1
2 BEEPS
ACTIVATES THE TURBO TIMER MODE FEATURE.
THE VEHICLE WILL RUN FOR 2 MINUTES WHEN THE KEY IS REMOVED.
PRESS & RELEASE
WHILE RUNNING BY KEY
IF THE VEHICLE DOES NOT START A START FAULT CODE WILL BE DISPLAYED. THE START FAULT
WILL CLEAR THE NEXT TIME THE SYSTEM IS LOCKED OR UNLOCKED. PLEASE SEE FAULT CODE
SECTION OF MANUAL FOR MORE INFORMATION.
MANUAL TRANSMISSION- RESERVATION MODE MUST BE SET TO REMOTE START THE VEHICLE.
#
2 BEEPS
ACTIVATES THE RESERVATION MODE/ PRESS 2X FOR TURBO.
MANUAL TRANSMISSION ONLY (SEE RESERVATION MODE)
PRESS & RELEASE ONCE
WHILE RUNNING BY KEY
UNLOCK
1
THE REMOTE WILL UPDATE THE CURRENT STATUS, LOCKED OR
UNLOCKED. THEN DISPLAY THE TEMPERATURE AND THEN THE
CLOCK. TO STATUS UPDATE THE RUNTIME PRESS AND RELEASE
THE TRUNK BUTTON.
PRESS & RELEASE FOR
STATUS UPDATE
#2 BEEPS
90 & 95 SERIES
2 WAY REMOTE OPERATIONS
PAGE 6
90 & 95 SERIES
2 WAY REMOTE OPERATIONS
PAGE 7

90 & 95 SERIES
PAGE 8
1 WAY REMOTE OPERATIONS
1 SECOND 2 UNLOCK DOORS/ DISARM ALARM*
1 SECOND
WHILE PANIC MODE IS 0TURNS OFF PANIC BUT DOORS STAY LOCKED
UNLOCK
1 SECOND 1 LOCK DOORS/ ARM ALARM*
3 SECONDS 1 ACTIVATE PANIC MODE
LOCK
PRESS 2 TIMES 1 ACTIVATE CONSTANT LOCK MODE
HOLD FOR 3 SECONDS 1 ACTIVATES REMOTE STARTER
HOLD FOR 4 SECONDS 2 TURN OFF REMOTE STARTER
START
HOLD FOR 3 SECONDS
(CAR ON WITH KEY) 2 ACTIVATES ENGINE IDLE MODE
PRESS 2ND TIME
WITHIN 3 SECONDS 2-2 ACTIVATES DRIVER’S DOOR PRIORITY UNLOCK FEATURE.
HOLD FOR 5 SECONDS 2 TRUNK RELEASE OUTPUT
AUX
HOLD FOR 3 SECONDS
(RUNNING BY KEY) 2-2 TURBO TIMER MODE. (STAYS RUNNING FOR 2 MINUTES)
DISPLAY BUTTON PRESS HONKS/
FLASH FUNCTION
PRESS & RELEASE
(ON WITH STARTER) 1 ACTIVATES EXTENDED RUNTIME
PRESS & RELEASE
(RUNNING BY KEY AND
PARK BRAKE ON)
2
ACTIVATES RESERVATION MODE
MANUAL TRANSMISSION ONLY
DISPLAY BUTTON PRESS FUNCTION
PRESS TOGETHER
THEN RELEASE
PRESS TOGETHER
THEN RELEASE
1
2
ACTIVATES SILENT LOCK WITHOUT
HONKS
ACTIVATES SILENT UNLOCK
WITHOUT HONKS
+
PRESS TOGETHER
FOR 3 SECONDS 2ACTIVATES THE AUXILIARY 1 OUTPUT FOR 5 SECONDS.
+
AUX 1
+
PRESS TOGETHER
FOR 3 SECONDS 2ACTIVATES THE AUXILIARY 2 OUTPUT FOR UP TO 5 SECONDS.
AUX 2
USER NOTES
90 & 95 SERIES
1 WAY REMOTE OPERATIONS
PAGE 9
HONKS/
FLASH

90 & 95 SERIES
PAGE 8
1 WAY REMOTE OPERATIONS
1 SECOND 2 UNLOCK DOORS/ DISARM ALARM*
1 SECOND
WHILE PANIC MODE IS 0TURNS OFF PANIC BUT DOORS STAY LOCKED
UNLOCK
1 SECOND 1 LOCK DOORS/ ARM ALARM*
3 SECONDS 1 ACTIVATE PANIC MODE
LOCK
PRESS 2 TIMES 1 ACTIVATE CONSTANT LOCK MODE
HOLD FOR 3 SECONDS 1 ACTIVATES REMOTE STARTER
HOLD FOR 4 SECONDS 2 TURN OFF REMOTE STARTER
START
HOLD FOR 3 SECONDS
(CAR ON WITH KEY) 2 ACTIVATES ENGINE IDLE MODE
PRESS 2ND TIME
WITHIN 3 SECONDS 2-2 ACTIVATES DRIVER’S DOOR PRIORITY UNLOCK FEATURE.
HOLD FOR 5 SECONDS 2 TRUNK RELEASE OUTPUT
AUX
HOLD FOR 3 SECONDS
(RUNNING BY KEY) 2-2 TURBO TIMER MODE. (STAYS RUNNING FOR 2 MINUTES)
DISPLAY BUTTON PRESS HONKS/
FLASH FUNCTION
PRESS & RELEASE
(ON WITH STARTER) 1 ACTIVATES EXTENDED RUNTIME
PRESS & RELEASE
(RUNNING BY KEY AND
PARK BRAKE ON)
2
ACTIVATES RESERVATION MODE
MANUAL TRANSMISSION ONLY
DISPLAY BUTTON PRESS FUNCTION
PRESS TOGETHER
THEN RELEASE
PRESS TOGETHER
THEN RELEASE
1
2
ACTIVATES SILENT LOCK WITHOUT
HONKS
ACTIVATES SILENT UNLOCK
WITHOUT HONKS
+
PRESS TOGETHER
FOR 3 SECONDS 2ACTIVATES THE AUXILIARY 1 OUTPUT FOR 5 SECONDS.
+
AUX 1
+
PRESS TOGETHER
FOR 3 SECONDS 2ACTIVATES THE AUXILIARY 2 OUTPUT FOR UP TO 5 SECONDS.
AUX 2
USER NOTES
90 & 95 SERIES
1 WAY REMOTE OPERATIONS
PAGE 9
HONKS/
FLASH

90 & 95 SERIES
PAGE 10
LED 2WAY REMOTE’S
1 SECOND 2 UNLOCK DOORS/ DISARM ALARM*
1 SECOND
WHILE PANIC MODE IS 0TURNS OFF PANIC BUT DOORS STAY LOCKED
UNLOCK
1 SECOND 1 LOCK DOORS/ ARM ALARM*
3 SECONDS 1 ACTIVATE PANIC MODE
LOCK
PRESS 2 TIMES 1 ACTIVATE CONSTANT LOCK MODE
HOLD FOR 3 SECONDS 1 ACTIVATES REMOTE STARTER
HOLD FOR 3 SECONDS 2 TURN OFF REMOTE STARTER
START
PRESS & RELEASE
(CAR ON WITH KEY) 2 ACTIVATES ENGINE IDLE MODE
PRESS 2ND TIME
WITHIN 3 SECONDS 2-2 ACTIVATES DRIVER’S DOOR PRIORITY UNLOCK FEATURE.
HOLD FOR 5 SECONDS 2 TRUNK RELEASE OUTPUT
AUX
HOLD FOR 3 SECONDS
(RUNNING BY KEY) 2-2 TURBO TIMER MODE. (STAYS RUNNING FOR 2 MINUTES)
DISPLAY BUTTON PRESS LED &
BEEPS FUNCTION
PRESS & RELEASE
(ON WITH STARTER) 1 ACTIVATES EXTENDED RUNTIME
PRESS & RELEASE
(RUNNING BY KEY AND
PARK BRAKE ON)
2
ACTIVATES RESERVATION MODE
MANUAL TRANSMISSION ONLY
DISPLAY BUTTON PRESS FUNCTION
PRESS TOGETHER
THEN RELEASE
PRESS TOGETHER
THEN RELEASE
1
2
ACTIVATES SILENT LOCK WITHOUT
HONKS
ACTIVATES SILENT UNLOCK
WITHOUT HONKS
+
PRESS TOGETHER
FOR 3 SECONDS 2ACTIVATES THE AUXILIARY 1 OUTPUT FOR 5 SECONDS.
+
AUX 1
+
PRESS TOGETHER
FOR 3 SECONDS 2ACTIVATES THE AUXILIARY 2 OUTPUT FOR UP TO 5 SECONDS.
AUX 2
USER NOTES
90 & 95 SERIES
LED 2WAY REMOTE’S
PAGE 11
LED &
BEEPS

90 & 95 SERIES
PAGE 10
LED 2WAY REMOTE’S
1 SECOND 2 UNLOCK DOORS/ DISARM ALARM*
1 SECOND
WHILE PANIC MODE IS 0TURNS OFF PANIC BUT DOORS STAY LOCKED
UNLOCK
1 SECOND 1 LOCK DOORS/ ARM ALARM*
3 SECONDS 1 ACTIVATE PANIC MODE
LOCK
PRESS 2 TIMES 1 ACTIVATE CONSTANT LOCK MODE
HOLD FOR 3 SECONDS 1 ACTIVATES REMOTE STARTER
HOLD FOR 3 SECONDS 2 TURN OFF REMOTE STARTER
START
PRESS & RELEASE
(CAR ON WITH KEY) 2 ACTIVATES ENGINE IDLE MODE
PRESS 2ND TIME
WITHIN 3 SECONDS 2-2 ACTIVATES DRIVER’S DOOR PRIORITY UNLOCK FEATURE.
HOLD FOR 5 SECONDS 2 TRUNK RELEASE OUTPUT
AUX
HOLD FOR 3 SECONDS
(RUNNING BY KEY) 2-2 TURBO TIMER MODE. (STAYS RUNNING FOR 2 MINUTES)
DISPLAY BUTTON PRESS LED &
BEEPS FUNCTION
PRESS & RELEASE
(ON WITH STARTER) 1 ACTIVATES EXTENDED RUNTIME
PRESS & RELEASE
(RUNNING BY KEY AND
PARK BRAKE ON)
2
ACTIVATES RESERVATION MODE
MANUAL TRANSMISSION ONLY
DISPLAY BUTTON PRESS FUNCTION
PRESS TOGETHER
THEN RELEASE
PRESS TOGETHER
THEN RELEASE
1
2
ACTIVATES SILENT LOCK WITHOUT
HONKS
ACTIVATES SILENT UNLOCK
WITHOUT HONKS
+
PRESS TOGETHER
FOR 3 SECONDS 2ACTIVATES THE AUXILIARY 1 OUTPUT FOR 5 SECONDS.
+
AUX 1
+
PRESS TOGETHER
FOR 3 SECONDS 2ACTIVATES THE AUXILIARY 2 OUTPUT FOR UP TO 5 SECONDS.
AUX 2
USER NOTES
90 & 95 SERIES
LED 2WAY REMOTE’S
PAGE 11
LED &
BEEPS

90 & 95 SERIES
1. Press and Hold the Start button for 3 seconds.
2. The park lights will flash and the siren**/ horn will chirp once.
3. The vehicle will remote start. The park lights will stay on during run time***
See diagnostic chart if your vehicle fails to start.
Note- Manual transmission vehicles must be set for reservation mode before remote
starting. If your vehicle starts without setting reservation mode return to your dealer
immediately as the incorrect remote starter has been installed.
*Hold for 3 seconds or until the remote beeps on 2way models.
** Alarm Models
***Default 15 minutes
OR PRESS & HOLD
PAGE 12
*Press # twice on manual transmission models.
90 & 95 SERIES
OR PRESS & HOLD
OR PRESS & HOLD
OR PRESS & RELEASE
PAGE 13
PRESS & HOLD

90 & 95 SERIES
1. Press and Hold the Start button for 3 seconds.
2. The park lights will flash and the siren**/ horn will chirp once.
3. The vehicle will remote start. The park lights will stay on during run time***
See diagnostic chart if your vehicle fails to start.
Note- Manual transmission vehicles must be set for reservation mode before remote
starting. If your vehicle starts without setting reservation mode return to your dealer
immediately as the incorrect remote starter has been installed.
*Hold for 3 seconds or until the remote beeps on 2way models.
** Alarm Models
***Default 15 minutes
OR PRESS & HOLD
PAGE 12
*Press # twice on manual transmission models.
90 & 95 SERIES
OR PRESS & HOLD
OR PRESS & HOLD
OR PRESS & RELEASE
PAGE 13
PRESS & HOLD

RESERVATION MODE
RESERVATION MODE TYPE -1 (DEFAULT SETTING)
1) PLACE THE TRANSMISSION INTO NEUTRAL (VEHICLE RUNNING).
2) APPLY THE PARKING BRAKE.
3) PRESS AND RELEASE THE # BUTTON ON THE REMOTE.
THE PARK LIGHTS WILL FLASH AND THE HORN (IF CONNECTED) WILL HONK
TWICE.
4) REMOVE THE KEY. (THE VEHICLE WILL STAY RUNNING).
5) EXIT THE VEHICLE. THE ENGINE WILL SHUT OFF WHEN THE DOOR IS CLOSED.
THE SYSTEM CAN NOW BE ACTIVATED BY PRESSING THE START BUTTON.
RESERVATION MODE TYPE -2 (DEALER PROGRAMMABLE)
1) PLACE THE TRANSMISSION INTO NEUTRAL (VEHICLE RUNNING).
2) APPLY THE PARKING BRAKE.
THE PARK LIGHTS WILL FLASH AND THE HORN (OPTIONAL) WILL HONK TWICE.
3) REMOVE THE KEY. (THE VEHICLE WILL STAY RUNNING).
4) EXIT THE VEHICLE. THE ENGINE WILL SHUT OFF WHEN THE DOOR IS CLOSED.
RESERVATION MODE WILL CANCEL IF A DOOR IS RE- OPENED. TO ENTER THE
VEHICLE WITHOUT CANCELLING RESERVATION MODE REMOTE START THE
VEHICLE THEN SHUT THE SYSTEM OFF BY THE REMOTE ONCE THE DOORS ARE
CLOSED AGAIN.
NOTE- LCD 2WAY MODELS WILL DISPLAY TURBO ON THE SCREEN AFTER
PRESSING THE # BUTTON TO SET THE RESERVATION MODE.
THE SYSTEM CAN NOW BE ACTIVATED BY PRESSING THE START BUTTON.
REQUIRED ON MANUAL TRANSMISSION VEHICLES ONLY. RESERVATION MODE
MUST BE SET TO REMOTE START THE VEHICLE.
SYSTEM PROGRAMMING - Menu 1
90 & 95 SERIES
OWNER'S MANUAL
SYSTEM OPERATIONS
PAGE 14
ARM SYSTEM / LOCK DOORS
PRESS & RELEASE
Programmable.
*Hold the Trunk button on LCD 2way models. See 2way operations.
SYSTEM PROGRAMMING - Menu 1
90 & 95 SERIES
OWNER'S MANUAL
SYSTEM OPERATIONS
PAGE 15
OR
1. Press and hold the Trunk Release button on

RESERVATION MODE
RESERVATION MODE TYPE -1 (DEFAULT SETTING)
1) PLACE THE TRANSMISSION INTO NEUTRAL (VEHICLE RUNNING).
2) APPLY THE PARKING BRAKE.
3) PRESS AND RELEASE THE # BUTTON ON THE REMOTE.
THE PARK LIGHTS WILL FLASH AND THE HORN (IF CONNECTED) WILL HONK
TWICE.
4) REMOVE THE KEY. (THE VEHICLE WILL STAY RUNNING).
5) EXIT THE VEHICLE. THE ENGINE WILL SHUT OFF WHEN THE DOOR IS CLOSED.
THE SYSTEM CAN NOW BE ACTIVATED BY PRESSING THE START BUTTON.
RESERVATION MODE TYPE -2 (DEALER PROGRAMMABLE)
1) PLACE THE TRANSMISSION INTO NEUTRAL (VEHICLE RUNNING).
2) APPLY THE PARKING BRAKE.
THE PARK LIGHTS WILL FLASH AND THE HORN (OPTIONAL) WILL HONK TWICE.
3) REMOVE THE KEY. (THE VEHICLE WILL STAY RUNNING).
4) EXIT THE VEHICLE. THE ENGINE WILL SHUT OFF WHEN THE DOOR IS CLOSED.
RESERVATION MODE WILL CANCEL IF A DOOR IS RE- OPENED. TO ENTER THE
VEHICLE WITHOUT CANCELLING RESERVATION MODE REMOTE START THE
VEHICLE THEN SHUT THE SYSTEM OFF BY THE REMOTE ONCE THE DOORS ARE
CLOSED AGAIN.
NOTE- LCD 2WAY MODELS WILL DISPLAY TURBO ON THE SCREEN AFTER
PRESSING THE # BUTTON TO SET THE RESERVATION MODE.
THE SYSTEM CAN NOW BE ACTIVATED BY PRESSING THE START BUTTON.
REQUIRED ON MANUAL TRANSMISSION VEHICLES ONLY. RESERVATION MODE
MUST BE SET TO REMOTE START THE VEHICLE.
SYSTEM PROGRAMMING - Menu 1
90 & 95 SERIES
OWNER'S MANUAL
SYSTEM OPERATIONS
PAGE 14
ARM SYSTEM / LOCK DOORS
PRESS & RELEASE
Programmable.
*Hold the Trunk button on LCD 2way models. See 2way operations.
SYSTEM PROGRAMMING - Menu 1
90 & 95 SERIES
OWNER'S MANUAL
SYSTEM OPERATIONS
PAGE 15
OR
1. Press and hold the Trunk Release button on

SYSTEM PROGRAMMING - Menu 1
90 & 95 SERIES
OWNER'S MANUAL
SYSTEM OPERATIONS
PAGE 16
SYSTEM PROGRAMMING - Menu 1
90 & 95 SERIES
OWNER'S MANUAL
SYSTEM OPERATIONS
PAGE 17
This feature is to be used when the vehicle is being serviced or if the remote
transmitter is lost or is not communicating with the system. This will disable the
remote starter from activating and disable the alarm of alarm models.
SERVICE MODE
ACTIVATING SERVICE MODE
Turn the Ignition Key ON
(Leave in the ON position)
Press and hold the Valet switch for 8 to 15 seconds
(Time depends on "Valet Settings" Program Option)
The horn/ siren* will chirp 5 times as confirmation that the system
is in Service Mode. The LEDs on the antenna will turn on Solid.
DEACTIVATING SERVICE MODE
Turn the Ignition Key ON
(Leave in the ON position)
Press and hold the Valet switch for 8 to 15 seconds
(Time depends on "Valet Settings" Program Option)
The horn/ siren* will chirp 2 times as confirmation that Service
Mode is OFF. The LEDs on the antenna will turn on OFF.
*SIREN FUNCTION ON ALARM MODELS

SYSTEM PROGRAMMING - Menu 1
90 & 95 SERIES
OWNER'S MANUAL
SYSTEM OPERATIONS
PAGE 16
SYSTEM PROGRAMMING - Menu 1
90 & 95 SERIES
OWNER'S MANUAL
SYSTEM OPERATIONS
PAGE 17
This feature is to be used when the vehicle is being serviced or if the remote
transmitter is lost or is not communicating with the system. This will disable the
remote starter from activating and disable the alarm of alarm models.
SERVICE MODE
ACTIVATING SERVICE MODE
Turn the Ignition Key ON
(Leave in the ON position)
Press and hold the Valet switch for 8 to 15 seconds
(Time depends on "Valet Settings" Program Option)
The horn/ siren* will chirp 5 times as confirmation that the system
is in Service Mode. The LEDs on the antenna will turn on Solid.
DEACTIVATING SERVICE MODE
Turn the Ignition Key ON
(Leave in the ON position)
Press and hold the Valet switch for 8 to 15 seconds
(Time depends on "Valet Settings" Program Option)
The horn/ siren* will chirp 2 times as confirmation that Service
Mode is OFF. The LEDs on the antenna will turn on OFF.
*SIREN FUNCTION ON ALARM MODELS

TEMP START MODE
SYSTEM PROGRAMMING - Menu 1
90 & 95 SERIES
OWNER'S MANUAL
SYSTEM OPERATIONS
PAGE 18 PAGE 19
P 12:35
PROGRAM
TO SET THE CLOCK TIME
PRESS AND HOLD THE LOCK AND STATUS
PRESS THE LOCK BUTTON TO CHANGE FROM HH TO MM
PRESS THE UNLOCK BUTTON TO INCREASE THE SETTING
PRESS THE START BUTTON TO DECREASE THE SETTING
PRESS AND RELEASE THE STATUS BUTTON TO EXIT.
BUTTONS ON
THE REMOTE FOR 4 SECONDS. THE REMOTE WILL BEEP 1
TIME THEN THE PROGRAM AND CLOCK ICONS TURN ON.
CLOCK SET MODE
+#
SYSTEM PROGRAMMING - Menu 1
90 & 95 SERIES
OWNER'S MANUAL
SYSTEM OPERATIONS
RUN TIME ADJUSTMENT
M-1234
PROGRAM
TO ENTER PROGRAM MODE
PRESS AND HOLD THE # BUTTON ON THE
REMOTE FOR 4 SECONDS.
THE REMOTE WILL BEEP 3 TIMES THEN DISPLAY
“PROGRAM” & “M-1234". PRESS START TO CONTINUE.
RUN TIME ADJUSTMENT
PRESS UNLOCK BUTTON TO CHANGE TO 4 MINUTES.
PRESS START BUTTON TO CHANGE TO 45 MINUTES.
PRESS # TO EXIT.
PRESS START TO GO TO RUN TIME ADJUSTMENT
ULTRA
TIMER
PROGRAM
ON
RUN 15
PROGRAM
ON
ULTRA ULTRA
ULTRAULTRA
TEMP
PROGRAM
TO SET LOW TEMP MODE
HOLD LOCK AND START FOR 5 SECONDS.
THE PARK LIGHTS WILL TURN ON.
THE REMOTE WILL DISPLAY TEMP ON.
PRESS AND RELEASE THE REMOTE BUTTON ACCORDING TO
THE TEMP SETTING TO BE SET. *SEE BELOW.
TEMP ADJUSTMENT
PRESS A REMOTE BUTTON TO SELECT SETTING.
PRESS LOCK. SETS TEMP 1- THE SYSTEM WILL START AT 0C / 32F
PRESS UNLOCK. SETS TEMP 2-
PRESS START. SETS TEMP 3-
PRESS (#). SETS TEMP 4-
THE SYSTEM WILL START AT -5C / 23F
THE SYSTEM WILL START AT -15C / 5F
THE SYSTEM WILL START AT -25C / -13F
THE PARK LIGHTS WILL FLASH TO CONFIRM THE SELECTION.
ULTRA
TEMP
PROGRAM
TO ENTER PROGRAM MODE
HOLD LOCK AND START FOR 5 SECONDS.
THE LCD WILL DISPLAY TEMP OFF. THE PARK LIGHTS
WILL FLASH AND THE HORN WILL HONK TWICE TO
CONFIRM THAT LOW TEMP MODE IS OFF.
TEMP MODE WILL EXIT IF THE KEY IS TURNED ON, THE
SYSTEM IS REMOTE STARTED OR IF 24 HRS PASSES.
STEP 1- TURN ON LOW TEMP MODE
STEP 2- SELECT THE DEFAULT TEMPERATURE SETTING
STEP 3- TURN THE TEMP MODE ON/ OFF
OFF
ON
ULTRA

TEMP START MODE
SYSTEM PROGRAMMING - Menu 1
90 & 95 SERIES
OWNER'S MANUAL
SYSTEM OPERATIONS
PAGE 18 PAGE 19
P 12:35
PROGRAM
TO SET THE CLOCK TIME
PRESS AND HOLD THE LOCK AND STATUS
PRESS THE LOCK BUTTON TO CHANGE FROM HH TO MM
PRESS THE UNLOCK BUTTON TO INCREASE THE SETTING
PRESS THE START BUTTON TO DECREASE THE SETTING
PRESS AND RELEASE THE STATUS BUTTON TO EXIT.
BUTTONS ON
THE REMOTE FOR 4 SECONDS. THE REMOTE WILL BEEP 1
TIME THEN THE PROGRAM AND CLOCK ICONS TURN ON.
CLOCK SET MODE
+#
SYSTEM PROGRAMMING - Menu 1
90 & 95 SERIES
OWNER'S MANUAL
SYSTEM OPERATIONS
RUN TIME ADJUSTMENT
M-1234
PROGRAM
TO ENTER PROGRAM MODE
PRESS AND HOLD THE # BUTTON ON THE
REMOTE FOR 4 SECONDS.
THE REMOTE WILL BEEP 3 TIMES THEN DISPLAY
“PROGRAM” & “M-1234". PRESS START TO CONTINUE.
RUN TIME ADJUSTMENT
PRESS UNLOCK BUTTON TO CHANGE TO 4 MINUTES.
PRESS START BUTTON TO CHANGE TO 45 MINUTES.
PRESS # TO EXIT.
PRESS START TO GO TO RUN TIME ADJUSTMENT
ULTRA
TIMER
PROGRAM
ON
RUN 15
PROGRAM
ON
ULTRA ULTRA
ULTRAULTRA
TEMP
PROGRAM
TO SET LOW TEMP MODE
HOLD LOCK AND START FOR 5 SECONDS.
THE PARK LIGHTS WILL TURN ON.
THE REMOTE WILL DISPLAY TEMP ON.
PRESS AND RELEASE THE REMOTE BUTTON ACCORDING TO
THE TEMP SETTING TO BE SET. *SEE BELOW.
TEMP ADJUSTMENT
PRESS A REMOTE BUTTON TO SELECT SETTING.
PRESS LOCK. SETS TEMP 1- THE SYSTEM WILL START AT 0C / 32F
PRESS UNLOCK. SETS TEMP 2-
PRESS START. SETS TEMP 3-
PRESS (#). SETS TEMP 4-
THE SYSTEM WILL START AT -5C / 23F
THE SYSTEM WILL START AT -15C / 5F
THE SYSTEM WILL START AT -25C / -13F
THE PARK LIGHTS WILL FLASH TO CONFIRM THE SELECTION.
ULTRA
TEMP
PROGRAM
TO ENTER PROGRAM MODE
HOLD LOCK AND START FOR 5 SECONDS.
THE LCD WILL DISPLAY TEMP OFF. THE PARK LIGHTS
WILL FLASH AND THE HORN WILL HONK TWICE TO
CONFIRM THAT LOW TEMP MODE IS OFF.
TEMP MODE WILL EXIT IF THE KEY IS TURNED ON, THE
SYSTEM IS REMOTE STARTED OR IF 24 HRS PASSES.
STEP 1- TURN ON LOW TEMP MODE
STEP 2- SELECT THE DEFAULT TEMPERATURE SETTING
STEP 3- TURN THE TEMP MODE ON/ OFF
OFF
ON
ULTRA

SHOCK SENSOR ADJUSTMENTS (2WAY ALARM MODELS)
PRESS AND RELEASE THE UNLOCK BUTTON TO
DECREASE THE SENSITIVITY. THE LCD WILL SHOW
THE CURRENT SETTING. THE LOWEST (LEAST
SENSITIVE SETTING IS SEN 1.
THE SHOCK SENSOR SENSITIVITY IS SET USING THE REMOTE PROGRAM MODE
FEATURE. ALARM MODELS ONLY.
PRESS AND RELEASE THE START BUTTON TO
INCREASE THE SENSITIVITY. THE LCD WILL SHOW
THE CURRENT SETTING. THE HIGHEST (MOST
SENSITIVE) SETTING IS SEN 10.
PRESS AND RELEASE THE # BUTTON ON THE REMOTE TO EXIT.
ENTER REMOTE PROGRAM MODE
ADJUSTING THE SENSOR SENSITIVITY
EXIT PROGRAM MODE
SEN 3
OFF
SEN 7
SEN 5
OFF
OFF
1
1
1
M-1234
PROGRAM
TO ENTER PROGRAM MODE
PRESS AND HOLD THE # BUTTON ON THE
REMOTE FOR 4 SECONDS.
THE REMOTE WILL BEEP 1 TIME AND THEN 3 TIMES.
THE DISPLAY WILL SHOW “PROGRAM” & “M-1234"
ENTER SHOCK SENSITIVITY PROGRAMMING
PRESS AND RELEASE THE UNLOCK BUTTON AND
THE SENS LEVEL WILL BE DISPLAYED
ULTRA
ULTRAULTRAULTRA
SYSTEM PROGRAMMING - Menu 1
90 & 95 SERIES
OWNER'S MANUAL
SYSTEM OPERATIONS
PAGE 20
3295 - PAGER MODE ON/OFF
SHOCK SENSOR BYPASS (ALARM MODELS)
SYSTEM PROGRAMMING - Menu 1
90 & 95 SERIES
OWNER'S MANUAL
SYSTEM OPERATIONS
PAGE 21
ULTRA
1
A 9:45
#
To increase battery duration on non alarm 2way systems it is recommended that the
user switches the Pager Mode feature of the remote to OFF.
ULTRA
1
M--1234
PROGRAM
ULTRA
1 ON OFF
TIMER
PROGRAM
ULTRA
ULTRA
1 2 3
1 2 3
ON
OFF
PAGER
PAGER
PROGRAM
PROGRAM
ULTRA
1
A 9:45
Hold for 4 seconds. Press & Release.
Press & Release. Press & Release.
Press & Release.
Pager Mode is now disabled and the battery life will be extended.
#