UMAGE TRIPOD User manual

TRIPOD
oor |user guide

WITH LOVE FROM COPENHAGEN
At UMAGE, our designers take inspiration from the distinct
nature of the Nordic landscape to create unique designs
related to the way we live in an urban setting. Inuenced by
the design language, colours and materials found around us in
Scandinavia, we create a collection that is rooted in our home
but designed for everyone.
Versatile, exible and multifunctional, our designs are created
to enhance an urban lifestyle in smaller spaces!

ENGLISH
If the external exible cable or cord
of this luminaire is damaged, it shall
be exclusively replaced by the ma-
nufacturer or his service agent or a
similar qualied person in order to
avoid a hazard.
FRANÇAIS
Si le câble électrique de ce luminaire
est endommagé, il peut être remplacé.
Pour éviter tout danger, le remplace-
ment doit impérativement être effec-
tué par le fabricant, un représentant
de celui-ci ou un réparateur agréé.
ESPAÑOL
Si se dañase el cable exterior exible
de esta lámpara, para evitar riesgos
deberá ser sustituido exclusivamente
por el fabricante, su representante o
un electricista cualicado.

! IMPORTANT !
Tripod oor stand safety instructions
(Read and keep these instructions for future reference)
PRODUCT NAME
Tripod oor Model no.: 4011, 4012
Rating parameter: 120V, 60HZ, AC ONLY
Lamp type: E26 Type A / 60W MAX
NOTE
This instruction sheet covers a variety of stands
(di󰀨erent colors), but with the same applications.
Do not connect your stand to a power source until
all stand- and lamp assembly and bulb installation
is complete.
NOTICE
You are advised to contact a qualied electrician
for these procedures

SAFETY PROCEDURES
Read and keep these instructions for
future reference
1. Remove the packaging carefully without the
use of sharp objects. Assemble the product
as shown in this user guide, then place the
product rmly on a xed surface before mov-
ing onto next procedure.
2. Unscrew the ring of the socket. Assemble the
suitable lampshade (not included) and put
it on the socket and screw the ring back on
until lampshade is completely fastened.
3. Firmly screw an E26 light bulb (MAX 60W)
into the socket. Do NOT put your ngers into
the socket!

4. Insert the plug into a suitable outlet and turn
on the power supply.
5. Switch to on.
6. Always disconnect the power supply before
cleaning, changing of light bulbs or repair of
the stand. The latter, should always be done
by a qualied electrician.
7. Let the light bulb cool o󰀨 su󰀩ciently before
changing the bulb.
8. Keep the Tripod oor away from any am-
mables, or objects that cannot handle heat.
9. Please always place the stand on a level sur-
face not more than 8° angle.
10. The stand is for indoor use ONLY.

11. If the Tripod oor in any way malfunctions, to
avoid accidents or mishandling of the stand,
please always contact a qualied electrician.
12. Only use the Tripod oor stand, where these
same o󰀩cial electricial- and technical param-
eters exist!
13. Do NOT touch the light bulb immediately after
the light is turned o󰀨. Be aware of possible
scalding!
14. The Tripod oor stand is NOT a childrens toy
and should not be used in any other manner
than described above.
15. The minimum diameter of open area (top &
bottom) should NOT be less than 100MM (4
inches); Lamp-to-shade spacing must be
over 3-1/4 inches (63.5mm); Lamp Centerline
Length must over 2-1/2 inches (82.5mm).

16. The weight of lamp shade should NOT exceed
1.1 KGS (2-1/2LBS).
NOTE
DO NOT try to repair the Tripod if the product,
cable, socket or the lampshade is in any way
broken or not as expected, such tasks are
only intended for qualied electricians!

DESIGNED BY
SØREN RAVN CHRISTENSEN
Just where you need
to create that tranquil
ickering candlelight
atmosphere.
“
”

Find assembly videos by using the QR code or by
going online at our website
umage.com/instructions
ASSEMBLY GUIDE

"CLICK"
If the external flexible cable or cord of this luminaire is damaged, it shall
be exclusively replaced by the manufacturer or a similar qualified person,
in order to prevent any possible hazards.

>100 MM / >4"
>100 MM / >4"
MAX 60W

ALUVIA mini | anthracite grey
TRIPOD table | white

TREASURES 2-DOOR
oak | venetian cane

GIVING BACK TO NATURE
In collaboration with the NGO One Tree
Planted, we are planting a tree every time one
of our designs made from wood are being sold.
Furthermore, we are compensating for the
polypropylene products we sell, by donating
part of the prots to the NGO Plastic Change,
supporting the World ocean clean-up and
minimizing plastic pollution.
“SAVING THE SCENT OF THE FOREST
AFTER AN EARLY MORNING RAIN”
SUSTAINABLE SUSTAINABILITY EFFORTS
We are dedicated being sensible frontrunners on the
environmental responsibility. If we provide timeless and
functional quality designs that last, we know nature will prevail,
as will UMAGE.

MULTIFUNCTION AND FLEXIBILITY
One of the key aspects of the designs at
UMAGE is multiple functions and exibility.
Designing with more than one function in
mind is a sustainable mindset as it reduces the
number of products you need to buy to get a
complete setting for your space.
REUSABLE PACKAGING
To minimize packaging waste, most of the
packaging from our lighting collection is
repurposed to be used as beautiful storage boxes
afterwards. Learn more on the next page…

REUSABLE PACKAGING
With your new lamp, you have also received a
free decorative storage box for the shelf.
THIS IS HOW IT WORKS
When your new lamp is out of the box you can
keep the box and reuse it as a storage box for
your small bits and bobs and place it on the shelf
or on the top of your closet - repurposing the
packaging for you and the environment.

CARDBOARD
PAPER Recycle your waste correctly
by searching for these icons on
the packaging
So not only are UMAGE's designs at-packed
to optimize the global logistics and the
environmental footprint, but it ensures that you
don’t need to throw away tons of packaging
material, that can just as well be reused for
something new.
Read more about our many sustainability efforts:
umage.com/sustainability
Please follow the marked icons on the packaging
materials for correct disposal of the remaining
packaging materials:

FOLLOW US ON SOCIAL MEDIA
@umagedesign | #umagedesign | umage.com
210413