unbranded Haversham 166/7947 User manual

Haversham - TV unit
166/7947
Assembly Instructions
- Please keep for future reference
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400 800
Important – Please read these instructions fully before starting assembly
Dimensions
Width - 95cm
Depth - 39cm
Height - 50cm
Issue 1 - 01/10/10

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Note: if required the next page
can be cut out and used as
reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1
. Check you have all the
components and tools listed on
pages 2 and 3.
. Remove all fittings from the
plastic bags and separate them
into their groups.
. Keep children and animals
away from the work area, small
parts could choke if swallowed.
. Make sure you have enough
space to layout the parts before
starting.
. Do not stand or put weight on
the product, this could cause
damage.
. Assemble the item as close
to its final position (in the same
room) as possible.
. Assemble on a soft level
surface to avoid damaging the
unit or your floor.
. We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
. Parts of the assembly will be
easier with 2 people.
. Dispose of all packaging
carefully and responsibly.
This product contain
Natural timber; you may
notice some variation in the grain
and colour of different component
parts which is normal for furniture
produced using natural wood and
is not the result of any
manufacturing fault.
.
Care and maintenance
.
. Avoid placing the furniture in
direct sunlight as this will cause
the timber to prematurely age.
Use an appropriate furniture
polish for natural wood
furniture and a dry cloth to
clean the product.
. From time to time check
that there are no loose
screws on this unit.
. This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.

Components - Panels
Please check you have all the panels listed below
2
01
02
03
04
13
12
11
05
06
07
19
17
18
14
15
16
08
Right front leg (48,5 x 4,5cm)
Right back leg (48,5 x 4,5cm)
Left front leg (48,5 x 4,5cm)
Left back leg (48,5 x 4,5cm)
(18,8 x 36cm)
Drawer front X 2 (42 x 20cm)
Central foot (5 x 4,5cm)
Top panel (95 x 39cm)
Base panel (85 x 37,5cm)
Shelf (X 36cm) 85
Drawer bottom X 2 ( x 36,6cm)34,9
Drawer left side X 2
Drawer right side X 2
Drawer back X 2
(
(
35 x 2,8cm)
35 x 1,8cm)
(
(
(
35 x 13cm)
35 x 13cm)
35,4 x 13cm)
Back panel (x 44,5cm)87,4
10
09
Side panel X 2 (43,5 x 29cm)
Cross rail (85 x 4,5cm)
Large runner X 2
Runner X 2
Small middle wall

3
2m
Components - Fittings
Please check you have all the fittings listed below
If you have damaged or missing components,
call the Customer Helpline: 08456 400 800
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
Ruler - Use this ruler to help correctly identify the screws
0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
Phillips screwdriver
(medium & large)
Eye protection
(when using a
hammer or glue)
Small
hammer
Ruler/tape
measure
AA
A
D
H
Foot pad 5 X
AB
8,0 x 30mm Wooden dowel X 40
C
I
3,5 x 30mm Screw X 35
3,5 x 25mm Screw X 08
3,5 x 40mm Screw X 3
EF
Handle X 2
G
10 x 10 Nail X 25
J
Locking nut X 12
M
Metal dowel X 12
A
L
6,0x30mm Thin wooden dowel X 4 Plastic cap X 8
Plastic pin X 4

Assembly InstructionsAssembly InstructionsAssembly InstructionsAssembly Instructions
Step 2
Step 1
Assembly Instructions
A
A
A
D
D
02
01
03
04
4
04
03
02
01
A
A
A
A
A
A
A
A
D
D
D
D
DD
D
D
J
17
J
J
J
A
J
17
03
04
04
10
10
B
B
.a)
.b)
A
A
A
17
17
Step 2
Insert wooden dowels
into leg , , and
as shown.
Screw metal dowels
into legs , , and
.
Do note over
tighten metal
dowels.
a) Fit side panel , left
front leg and left back
leg together.
b) Insert locking nuts
where shown. Use a
screwdriver to turn locking
nuts clockwise to lock.
01
01
10
01
02
02
04
17
10
02
03
03
03
03
04
17
04
A
A
D
B
J
04
Parts , , and
are labelled for easier
identification.
Insert wooden dowels
into large runners .
Fix runner to side panel
using screws . Make
sure holes in runner are
positioned as shown.
Make sure holes
face this side

Assembly Instructions
Step 3
Step 4
5
17
17
02
01
10
10
02
01
J
B
B
J
J
J
JA
A
A
A
A
A
A
A
A
A
A
A
A
A
A
L
L
I
11
L
L
09
09
07
06
13
A
13
Front view
==
.a)
.b)
Step 4
a) Fit side panel , right
front leg and right back
leg together.
b) Insert locking nuts
where shown. Use a
screwdriver to turn locking
nuts clockwise to lock.
10
02
01
J
17
10 B
Fix runner to side panel
using screws . Make
sure holes in runner are
positioned as shown.
09
06
07
13
Insert wooden dowels
into base panel , shelf
as shown.
A
L
Fix central foot to the
base panel using screw
and small middle wall
11
I
Make sure holes
face this side
Insert thin
wooden dowel into
cross rail as shown.
.
06

180º
Assembly Instructions
Step 5
Step 6
Step 7
6
18
B
18
B
13
07
18 18
B
B
B
B
C
C
I
I
I
06
06
Fix middle wall to shelf
using screws .
13
07 C
Make sure holes
face this side
Make sure holes
face this side
Fix runners in both
sides of the middle wall
using screws . Make
sure holes in runners are
positioned as shown.
Fix base panel to the
part assembled in step 6
using screws .
18
B

Assembly Instructions
Step 8
Step 9
7
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
03
10
04
01
02
10
09
Fix assembled right side
and cross rail to the
part assembled in Step 7
using screws as shown.
Fix assembled left side and
cross rail to the part
assembled in Step 7 using
screws as shown.
09
09
C
C

Assembly Instructions
Step 10
Step 11
Step 12
D
05
05
05
D
D
D
D
D
H
5x
05 J
J
J
05
08
08
C
H
H
H
H
H
8
X
IMPORTANT
Cabinet must be
“square” when
back is attached.
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
Attach back panel
using nails C .
08
G
Insert locking nuts as
shown. Use a screwdriver
to turn locking nuts
clockwise to lock. Fix top
panel to the
assembled part using
screws .
05
C
J
With the help of a hammer,
fix foot pads as shown.
H
Insert metal dowels into
top panel .
Do note over
tighten metal
dowels.

Assembly Instructions
Step 13
Step 14
Step 15
Step 16
9
A
A
A
A
A
C
C
C
C
E
C
C
C
C
F
15
15
14
14
16
19
12
2x 2x
2x
2x
A
A
A
A
A
F
FF
F
F
M
M
8 x
M
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400 800
Assemble is complete
Insert wooden dowels
into drawer sides and
.
Attach drawer sides
and to drawer front
using screws .
Slide drawer base into
grooves as shown.
Attach drawer back
using screws .
Fix handle using screw
.
14
14
15
15 12
C
19
16
C
C
E
A
Insert wooden dowels
into the runners as shown.
Insert plastic caps in
the right and left side panel
as shown.
M
Place drawers onto runners
and slide past dowels
fitted to runners.
Then, with hammer, tap
plastic pins in flush with
drawer side, this is a safety
catch to stop drawer falling
out.