www.UncagedErgonomics.com
ASSEMBLY & OPERATING INSTRUCTIONS:
KT1
Adjustable Height &
Angle Keyboard Tray
2
5
5. The Mouse Pad (D) attaches to the right or left side of the
Keyboard Tray (C). Release the thumb screw on the attachment to
move the Mouse Pad closer to or farther away from the Keyboard tray.
D
C
6
6. Press down to tilt the Mouse Pad and adjust its’ angle.
If the mouse pad is too loose, tighten
the 2 screws on the mouse pad mounting bracket.
8
8. KT1 is adjustable in height and angle.
Release the lever (7A), adjust to your desired position,
and lock the lever in place.
7
7. The Keyboard Tray slides in/out by pushing/pulling.
7A.To adjust the Keyboard Tray’s angle, release the lever under
the keyboard tray.
7A
4
4. Connect the metal Mouse Pad Bracket to the keyboard tray
using 2 H Screws & 2 G Nuts.
4A. Connect the Mouse Pad to the Mouse Pad Bracket
using 2 H Screws & 2 G Nuts.
4A
G
H
