Uni-Mig UNI-FLAME REG User manual

REGULATOR
Operation Manual
Argon/Oxygen/LPG/Acetylene

General Operating Instructions
m) Never tamper with or disassemble any part of the regulator.
n) Never adjust or block the safety relief valve.

General Operating Instructions

WELDING GUNS OF AUSTRALIA Pty Ltd
WWW.UNIMIG.COM.AU
Disclaimer:
While the information is provided in good faith, Welding Guns Of Australia does not warrant the accuracy of information
provided nor assume any legal responsibility for it or for any damage which may result from reliance on or use of it or from any
negligence of Welding Guns Of Australia or other person/s with respect to it.
For further information please call Welding Guns of Australia Pty Ltd.
112 Christina Rd, Villawood NSW 2163 - PO Box 3033 Lansvale NSW 2166
UNIMIG pursue a policy of continuous research and development, and therefore
reserve the right to change the specifications, or design, without prior notice.