Unika Stage Series User manual

Overview
Features
Functions Instruction
Operation Guidance
Notes
Specification
PHASE TESTER
SPT-3rt
User Manual
STAGE SERIES
www.unikapro.com

www.unikapro.com
1
SPT-3rt is the best tools of UNiKA Stage Series. This tool is suitable for
any speaker manufacturer, touring and fixed installation applications. It
can be used for testing phase either speaker or balance cable. An external
microphone input socket can be connected external dynamic microphone to
test the speakers that have been hung up. By using neodymium magnet to
combine transmitter and receiver units for easy carrying.
Overview

www.unikapro.comwww.unikapro.com 2
1. Detect the phase accuracy in any audio system, prevent the musical
signal from cancellation due to the opposite phase.
2. Detect the XLR signal cable to prevent it from contact fail, brokerage or
opposite connection.
3. Built-in external microphone input socket in order to use for the harder
environment such as the hanging speaker cluster.
4. Testable range from 10 cm to 3 meters. Some ideal environment can be
tested far away from the axis of speaker for 7 meters.
Features

www.unikapro.com
3
Functions Instruction
①Buzzer to generate pulse tone.
②Neodymium magnet to combine SPT-3r receiver.
③HOT PIN selector, select test pin of XLR cable either
pin-2 or pin-3.
④ Linear pot to tune pulse tone level.
⑤Release screw to open battery cabinet. Recommend
to use 9V PP3 Alkaline battery.
⑥Neodymium magnet to combine SPT-3r receiver.
⑦Male XLR connector to connect balance cable to
send pulse tone to mixer.
⑧ Power and pulse tone indicator.
⑨ Power switch.
SPT-3t Transmitter
①
②
③
④
⑤
⑥
⑦
⑧
⑨

www.unikapro.comwww.unikapro.com 4
Functions Instruction
SPT-3r Receiver
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
①Omni direction microphone.
②Red color out phase indicator.
③Green color in phase indicator.
④ Input selector, select test sources and applications
from built-in Mic/Cable test/EXT MIC etc.
⑤HOT PIN selector, select test pin of XLR cable
either pin-2 or pin-3.
⑥Release screw to open battery cabinet. Recommend
to use 9V PP3 Alkaline battery.
⑦Neodymium magnet to combine SPT-3t transmitter.
⑧ Female XLR connector to connect external dynamic
microphone.
⑨ Neodymium magnet to combine SPT-3t transmitter.
⑩ Blue color power indicator.
⑪ Power switch.

www.unikapro.com
5
Operational Guidance
1. Phase tester - Test XLR cable
③Switch on the power and tune level then
you will hear the click tone.
④ Shift receiver’s INPUT switch into LINE
position. Shift the same pin number
at both side then the green IN led will
be shined if the both pins are proper
soldering in symmetrically. If the red
OUT led is shining then meaning the pin
2/3 are reversed from the other side.
①Release screws & plug in 9V PP3
Alkaline batteries.
②Plug in XLR cable in each side.

www.unikapro.comwww.unikapro.com 6
Operational Guidance
2. Test speaker's phase by built-in MIC
③Switch on the power and tune level then
you will hear the click tone.
④ Shift the receiver’s input switch into MIC
position. And adjust transmitter’s LEVEL.
You can hear click tone from speaker.
②Plug female side of XLR connector into
transmitter and plug male side of XLR
connector into mixer or amplier.
⑤Aiming receiver’s built-in mic to axis
position of speaker from 1 meter or
more distance. If the green IN led is
shined then the phase of speaker is
proper. If the red OUT led is shined then
the phase of speaker is reversed.
①Release screws & plug in 9V PP3
Alkaline batteries.

www.unikapro.com
7
Operational Guidance
3. Test speaker's phase by EXT. MIC
All procedures are same as Chapter-2 But
connect ext. dynamic mic to be instead of
built-in mic. And shift INPUT switch into
EXT.MIC position.
Note: Do not use condenser mic because
receiver did not provide phantom power.

www.unikapro.comwww.unikapro.com 8
Notes
1. Avoid direct sun light and damp working environment.
2. The unit is designed to operate between 0°~55°C (32°~122°F) and in an
atmosphere of relative humidity up to 80%.
3. Recommend to use 9V PP3 Alkaline battery.
[email protected]
If you still need further clarication, please send email to us and we will
do our very best to reply you in short order.

Specification
The following information is subject to change without notice.
TRANSMITTER
Signal type Pulse tone from buzzer
Frequency spectrum, electrical 1Hz to 20KHz
Frequency spectrum, acoustic 200Hz to 5KHz
Output level, electrical 0 to 1V (Acoustic level is xed)
Output load impedance >1KΩ
Output source impedance 1KΩ
Power supply 9V PP3 Alkaline battery (approx. 50 hours)
Power consumption 10mA
RECEIVER
Frequency spectrum, electrical 1Hz to 20KHz
Frequency spectrum, acoustic 10Hz to 1KHz
Input impedance (Mic) 1KΩ
Input impedance (Line) 10KΩ
Input level (Mic) 10mV - 1V
Input level (Line) 0.5V to 50V
Output level 0V to 1V
Power supply 9V PP3 Alkaline battery (approx. 50 hours)
Power consumption 10mA
PHYSICAL CHARACTERISTICS (whole set)
Dimensions/Shipping dimensions ( W x D x H ) 120 X 95 X 56 mm
20pcs packs dimensions ( W x D x H ) 245 X 195 X 117 mm
Weight/Shipping weight 0.4 Kg / 0.45kg
20pcs packs shipping weight 10.0 Kg
Operating temperature 0°~50°C
Storage temperature -30°~+75°C
www.unikapro.com
9