Unilux ERGO DESK 2 User manual

ERGO DESK 2
400124576
For customer support or information please contact us on our website www.my-unilux.com, rubric “Customer support” Edition du 17 avril 2019
www.my-unilux.com
?
?
x1 5min
?
i
Ax1 Bx1 Cx1 Dx1
>950mm
>610mm
DO NOT EXCEED THE MAXIMUM WEIGHT
INDICATED
120
mm
505
mm
16KG
3 KG
13 2
+
A
Take the packaging carton
apart, take out the product
and place it properly on the
table.
456
Push the keyboard tray connector
into the slot and lock it.
1
23
When removing the
keyboard tray, please open
the wrench and remove it.
720MM
700MM
375MM
120-505MM
720MM
415MM
308MM
3- 15KG
M A X
15KG

ERGO DESK 2
400124576
For customer support or information please contact us on our website www.my-unilux.com, rubric “Customer support” Edition du 17 avril 2019
7
PLEASE, DO NOT PUT HANDS NEAR THE SUPPORTING BARS, AS THEY
CHANGE DURING ADJUSTING AND MAY HURT YOU.
PLEASE,MAKE SURE ALL
THE INSTALLED
EQUIPMENTS ARE ON THE
TABLE , AND NOT STICKING
OUT OF THE EDGE , OR IT
MAY HARM OR CAUSE
DAMAGE.
8
9
cable
1
Nylon ties
ADHESIVE BUCKLE HELPS
TO MAKE THE CABLES TIDY
AND CLEAN. PLEASE LEAVE
ENOUGH LENGTH OF CABLE
FOR HEIGHT ADJUSTMENT
FUNCTION, OTHERWISE IT
MAY CAUSE UNEXPECTED
LOST.
DO NOT PUT HANDS NEAR THE SUPPORTING BARS WHILE YOU ARE
ADJUSTING. IT MAY HURT YOU.
Based on the actual usage, press the
handle on one side, and adjust the
workstation to the proper height.
Please put the devices onto
the top of the workstation.
Use the cable management to
guide and bundle the cables
This surface is with
glue, helping to fix
the cable
management on the
table.