Untangle u25x User manual

 

u25x Setup Guide

Package Contents
The u25x package includes:
●VESA mounting hardware
●Power supply (12V 3A adapter and plug)
●Rubber feet
●Ethernet cable
●u25x appliance

u25x rear and front panels
Rear Panel


Front Panel


Power input
HD1
HDMI port
HD2
HDMI port (disabled)

USB3 ports

USB2 ports
-1
Internet port
-2
LAN port

Microphone (disabled)

Audio (disabled)

WiFi (not available)
COM1
Serial port (disabled)

Power indicator

Power button
Installation
●If necessary, use the included VESA mounting hardware to mount the appliance.
●If you are not mounting the appliance, attach the included rubber feet to the bottom of the appliance.
●Connect the ethernet cable from your Internet modem or router to the Internet port (LAN 1) located on the rear panel.
●Connect the ethernet cable from your LAN switch to the LAN port (LAN 2) located on the rear panel.
●Plug in the power adapter to a power source and connect it to the 12V power input located on the rear panel.
●Review the power indicator on the front of the appliance. If the indicator is green, the appliance is powered on.
●If the appliance is not powered on, press the power button.

untangle.com | © Copyright 2018. Untangle, Inc. All rights reserved.
u25x Setup Guide - Page 1 



Connect to the appliance
You can connect to your appliance via the online Command Center portal at https://untangle.com/cmd. Alternatively, you can connect to your
appliance from the local network, or directly using a monitor, keyboard, and mouse.
Via Command Center
Provisioning a new u25x appliance via Command Center is a convenient way to deploy and configure NG Firewall. To set up and manage
your new appliance from Command Center follow these steps:
1. Navigate your web browser to https://untangle.com/cmd.
2. Log in with your Untangle Command Center account, or click Create Account to set up an account.
3. In Command Center, click Add in the Appliances screen.
4. Enter the serial number located on the bottom of your appliance.

5. Click Add to confirm the new appliance.
6. After the appliance successfully adds to your account, you can select it from the list of appliances.
7. Click Remote Access to connect to the administration of your new appliance.
8. Continue to the setup wizard.
Via network connection
Alternatively, you can connect to your NG Firewall management interface from the local area network. This is useful for example if your NG
Firewall appliance cannot reach the Internet and you require local administration to configure the TCP/IP settings. To access the
administration from a local network follow these steps:
1. Connect your management system to the network attached to the LAN port (LAN 2) of the appliance.
2. Check the network status of your management system and confirm that you receive an IPv4 address in the subnet of
192.168.2.0/24 (e.g. 192.168.2.100).
3. In a browser, navigate to 192.168.2.1.
4. Accept the SSL certificate notice in your browser and continue to the setup wizard.
Via direct connection
If neither of the previous options is available, you can connect to your appliance directly by attaching a display to the HDMI port (HD1) and
a keyboard and mouse to any of the USB ports. At the menu on the bottom of the screen, click Launch Client to open the administration in
a browser and continue to the setup wizard.

Configure the setup wizard
When you connect to the administration for the first time, the setup wizard prompts you to configure the essential parameters to get your
appliance up and running.
Get Started
NG Firewall packages its premium features as apps. During your first login NG Firewall prompts you to install the recommended apps. If you do
not have a license, some of the recommended apps run as a 14 day trial. The trial converts to a subscription once you apply a valid license. You
can learn more about NG Firewall apps at https://www.untangle.com/untangle-ng-firewall/applications/.
Warranty
This appliance is covered by a one, two or three year manufacturer warranty based on the option chosen at the time of purchase. For a
description of the warranty policy visit http://www.untangle.com/refund-return-policy.
Support & Documentation
For technical support availability, contact information, and troubleshooting tips visit http://support.untangle.com. Help resources are
available in the online help system at http://wiki.untangle.com.

untangle.com | © Copyright 2018. Untangle, Inc. All rights reserved.
u25x Setup Guide - Page 2 
