UPERFECT UFilm A17 User manual

In order to ensure your safe use of this product, please read thismanual
carefully before using this product and keep itproperly.
15.6 Inch Portable Monitor
User Manual
Email: [email protected]om
Email: [email protected]

WARNING
Please read the user manual in the product packaging carefully before using the device.
This product has been designed with personal considerations in mind, but
incorrect use may cause electric shock and fire. To avoid damaging the safety
parts inside the machine, please observe the following rules during the
installation, use and repairing:
To avoid Personal injury, please observe the following rules:
in a worse condition;
2. Before using the device, make sure all cables are connected properly and the power cord is not
damaged, if there is any damage, please contact us immediately;
3. To avoid dust, moisture and extreme temperatures, please Don’t place the device in any Damp area.
Please place the device on a stable surface when in use;
4. Don’t put any object or splash any liquid into the openings of the device casing;
5. Please use the power cord provided with the machine, and if you use other power cord, which is not
provided by the Seller, or the power cord with the device is damaged, please contact our professionl
After-Service Team immediately, we will provide you the best solution in 12 hours;
This Tip is very Important when you use the Monitor;
6. Please use a PD Adapter to supply power for the display. The Mobile Phone Charger and PD Power
Bank that meet power supply demand can also supply power for the display. If you are not sure the
power supply types, please contact our professionl After-Service Team immediately, we will provide
you the best solution in 12 hours;
7. Do not attempt to open the rear case of the device. There are no spare parts in the device that the
customers can use to repair. If any abnormality occurs, please contact our professionl After-Service
Team immediately, we will provide you the best solution in 12 hours;
1. Do not place the monitor on a sloping table unless there are security measures;
2. Do not drop or throw objects or toys onto the screen, because it will result in personal injury,
product and the screen damage;
Email: [email protected]Email: [email protected]
1

HOLD WAY
To prevent other injuries, please observe the following rules:
Slim Monitor Design, please Take Care when Holdling.
To prevent the machine damage, the following situations should be avoided:
2. Do not allow Children to throw or insert objects into the monitor;
4. Please Unplug the power cord when the device is unattended for a long time.
5. Do not touch the power cord or signal cable when lightning strikes, otherwise it may cause
electric shock;
6. Do not let any object compress or wrap the power cord;
7. Do not place the monitor where the power cord can be easily damaged.
1. Place the monitor where it is easy to fall;
2. Place the display near a radiator or heat source;
Do not rub the screen with a hard object as it will scratch or permanently damage the screen.
damage.
The power cord is the main isolation device and must be put in an Easy-to-operate place.
If possible, try to use the recommended resolution for best results. Because if you use other resolution other than the
resolution.
A still picture on the screen for a long time will cause damage to the screen and produce afterimages. Please make
sure to use the screen saver, the afterimage and related issues are not covered in the scope of product repairing
warranty.
If you encounter any technical problems while using this device, please contact our professionl After-Service Team
immediately
on Page 16, we will provide you the best solution in 12 Hours.
Hold the Bottom part of the monitor.
Hold both sides of the monitor screen.
The following is the Error Holding method:
Email: [e-mail]: [e-mail]
2 3

Function of main accessories Interface function introduction
AMicro USB port
OTG interface, connected to the mouse
and keyboard. Don’t power the display by
this Micro USB port.
BPower Button
monitor.
C+ port
volume +/brightness +
D- port
volume +/brightness +
EMenu port
Press to enter the OSD (On-Screen
Display) menu.
FExit port
Press to return to the previous operation.
GPD port
Handling higher power and allows a range of
devices to charge quickly over a USB C
HHP Port
3.5mm audio output.Connect external
speakers, headphones or digital audio
equipment.
IType-C Port
video signal transmission.
JMini DP
Audio and video signal transmission.
KStandard HDMI
Audio and video signal transmission.
for power and signal transmission
Type-c to Type-c Cable
for signal transmission
Standard HDMI Cable
for power
PD Adapter
If there are any missing parts, please contact us and we will resend to you soon.
G
H
I
J
K
A
B
C
D
E
F
Email: [email protected]Email: [email protected]
4 5

Product Parameters
The display supports horizontal and vertical rotation, and you need to set it in your
computer device: Extended mode - vertical rotation 90 degrees / 270 degrees.
Front
15.6”
MDS-156A07
IPS Screen
15.6 inch
16:9
3840*2160
178°
1000:1
450 cd/m
100% sRGB
8Ω2W
3.5mm headphone interface
60 Hz
6 7
HD (Signal Transmission) 、Type C full function （Power or Signal Transmission from
Tunderbolt3 PC or USB3.1 Phone) 、Mini DP (Signal Transmission ）、PD power supply
Model
Panel Type
ScreenSize
Aspect Ratio
Refresh Rate
Output Interface
Visual Angle
Resolution
Contrast Ratio
Brightness
Color Gamut
Built-in Speakers
Input Interface
Email: [email protected]Email: [email protected]

1. Connect to computer with Type-C interface which supports Thunderbolt3 interface
Function introduction
1, 4K requires more power. Please use an external power supply for the monitor when using it.
2. Please use original cable and PD adapter.
3. When “No signal” or “Power saving mode” appears, please change the type-c cable head
to another side and connect to monitor again.
OSD Menu introduction
BRIGHTNESS
ASPECT: Choose from ‘16:9’ or‘4:3’.
Under ‘IMAGE’ menu, you can adjust ‘ASPECT’ only, other
options in pale are default.
Note：It is recommended to set 16:9 aspect, 4:3 is not full
screen.
CLOCK
PHASE
H.POSITION
IMAGE
V.POSITION
ASPECT 16 : 9
5 0
5 1
5 2
5 3
SHARPNESS
RESOLUTION
MAX RESOLUTION
3840X2160 60HZ
3840X2160 60HZ
DCR
100
50
OFF
BRIGHTNESS
CONTRAST
BRIGHTNESS
ECO STANDARD
Color Temp: Contains two preset color modes (Cool, Warm) and User
Mode.
Red: Range from 0 to 100.
Green: Range from 0 to 100.
Blue: Range from 0 to 100.
Under ‘WARM’ and ‘COOL’ option, color option ‘RED’, ‘GREEN’, and
‘BLUE’ in pale are default.
RESET : To restore default setting or manufacturer setting.
HDR MODE : options include ‘OFF’ ‘2084’and ‘AUTO’.
When HDR MODE IS ‘AUTO”and “2084”, you will not be allowed to
adjust “BRIGHTNESS””BLACK LEVEL””CONTRAST ”.
SIFNAL SOURCE: Contains two signal sources Type C and HDMI.
Low Blue Light: The adjusting range isfrom 0 to 100.(0/25/50/75/100)
VOLUME: The adjusting range is from 0 to 100.
FREESYNC:Choose ‘OFF’, or ‘ON’. Freesync is only available if the display
is in “GAME”mode,
OD: Choose ‘OFF’, or ‘ON’.
OSD H. POS.: Range from 0 to 100.
OSD V. POS.: Range from 0 to 100.
OSD TIMER : Range from 0 to 60.
TRANSPARENCY : Range from 0 to 100.
LANGUAGE : Including ‘English’, ‘French’, ‘German’, ‘Chinese
‘Japanese’ and ‘Korean’.
Under ‘OSD SETTING’ menu, adjustable options are ‘LANGUAGE’,
‘OSD H. POS.’, ’OSD V. POS.’, ‘OSD TIMER’, and ‘TRANSPARENCY’.
OSD SETTING
OSDV.POS.
OSDTIMER
TRANSPARENCY
LANGUAGE
OSD SETTING
OSDH.POS
GREEN
BLUE
COLORTEMP
COLOR TEMP
RED
USER
50
50
50
60
50
10
0
VOLUME
FREESYNC
OD
SIGNALSOURCE
MISC
LOWBLUELIGH T
3840x216060HZ
TYPE C
0
50
OFF
OFF
External power is required
4K models require PD Power
Note: Please check the Type C port of your PC/Laptop whether supports audio and video signal
transmission(Thunderbolt3 ). If it is just a Type C for charging, you need a adapter“HDMI to Type C”for signal
transmission. You can also contact us by email on
Page 16 for the adapter. We will reply to you within 12
hours.
Macbook 12"、Macbook 13" 2017、MacbookPro 2016/2017/2018、New Macbook Air 2018、iPad Pro 2018 ChromeBook
Pixels 、PielBook Pen 、MagicBook 、YogoC930、Yogo 5 Pro 、Yogo 6 Pro 、ThinkPad XI Carbon2017、Miix 720、
Legion Y7000/Y7000P/Y7000K、XPS13、XPS15、G3/G5/G7 、Inspiron 5000/7000、
Pavilion X2 、EliteBook Folio G1 、EliteBook 1050、G1 Microsoft Surface Book2 、Matebook D、Matebook X 、
MatebookX Pro 、Matebook E 、Matebook13
Continuous update...
PC which supports Thunderbolts 3:
BRIGHTNESS: Range from 0 to 100;
CONTRAST: Range from 0 to 100;
ECO: Choose from ‘STANDARD’, ‘RTS’, ‘FPS’, ‘TEXT ’, ‘MOVIE’, and ‘GAME’.When
ECO MODE IS‘RTS’, ‘FPS’,‘TEXT’, ‘MOVIE’, and ‘GAME’, you will not be allowed to
adjust “BRIGHTNESS””BLACK LEVEL””CONTRAST”.
DCR:Choose ‘OFF’, or ‘ON’.
4
IMAGEAUTOADJUST
RESET
COLORAUTOADJUST
RESET
AUTOPOWERDOWN
HDRMODE
OFF
OFF
60
50
10
0
RESOLUTION
MAX RESOLUTION
3840X2160 60HZ
3840X2160 60HZ
RESOLUTION
MAX RESOLUTION
3840X2160 60HZ
3840X2160 60HZ
RESOLUTION
MAX RESOLUTION
3840X2160 60HZ
3840X2160 60HZ
RESOLUTION
MAX RESOLUTION
3840X2160 60HZ
3840X2160 60HZ
RESOLUTION
MAX RESOLUTION
3840X2160 60HZ
3840X2160 60HZ
Email: [email protected]Email: [email protected]
8 9

2. Connect mobile phone supporting USB3.1 Protocol with Type-C output
function
1, 4K requires more power. Please use an external power supply for the monitor when using it.
2. Please use original cable and PD adapter.
3. When “No signal” or “Power saving mode” appears, please change the type-c cable head
to another side and connect to monitor again.
Function introduction Function introduction
Note: Please check the Type C port of your Mobile Phone whether supports audio and video signal
transmission( USB 3.1 ). If NOT SUPPORTS, it is just a Type C for charging, You need a adapter“I-O-S/Android to
HDTV cable”for signal transmission.
You can also contact us by email on
Page 16 for the adapter. We will reply to you within 12 hours.
S8 、S8+、S9 、S9+、S10、S10+、S10e、Note8 、Note9 、Mate10、Mate10 Pro 、Mate20、Mate20 Pro 、Mate 20X、
Mate P20 、Mate P20 Pro 、HonorNot10、Mate P30、Mate P30 Pro 、
Continuous update...
Mobile Phone which supports USB 3.1:
3. Connect to Nintendo Switch (connected toGaming Devices without touch function)
4. Connect to computer with HDMI interface Video/Audio signal
In the case of external power supply, the display supports Type-c connection by using the
standard wiring materials with the Switch mainframe. Turn on the Switch TV mode: When an
external PD Agreement power supply is used, the external power supply can supply power to
the display and Switch simultaneously. The battery of the Switch is charged. The output is
1080P.
The monitor has a Standard HDMI interface and is compatible with most HDMI devices. When
require an external a PD power supply).
Note:
1. 4K models need to use at least 9V 3A or above PD power.
cable.
Video/Audio signal
External power is required
4K models require PD Power
External power is required
4K models require PD Power
External power is required
4K models require PD Power
Standard HDMI cable
Email: [email protected]Email: [email protected]
10 11

Operation Notes:
1. Please operate the display by using the original accessories in the package.
2. When an external HDMI cable is connected, please connect the power
voltage will result in Black screen, so please make sure to connect the PD power supply.
4. When connected with a Windows 10 system computer, if the screen displays abnormally,
①Press the power button to check if the display is on;
②Check whether the connection method is correct;
③Check whether the original wire power connector is used;
④If possible, you can try to connect the monitor with your another device, if no singal yet, please do as follows;
⑤The above methods still can't solve the problem. Please contact us .We will give you the most professional and
satisfactory reply within 12 hours.
Q: The monitor and the computer are connected directly using an HDMI cable, it
displayed “NO SINGAL” OR “ POWER SAVING”.
① Check whether the signal cable is properly connected to the device interface, and try to plug it in again;
②Check if you use the original cable and adapter;
③If possible, you can try to connect the monitor with your another device, if no singal yet, please do as follows;
④The above methods still can't solve the problem. Please contact us . We will give you the most professional and
satisfactory reply within 12 hours;
Q: An Transfer adapter was used during the connection between the monitor and the
computer and the monitor displayed “NO SINGAL” OR “ POWER SAVING”.
① Check whether the signal cable is properly connected to the device interface, and try to plug it in again.
②Check if use the original cable and adapter;
③If possible, you can try to connect the monitor with your another device, if no singal yet, please do as follows:
④The above methods still can't solve the problem. Please contact us . We will give you the most professional and
satisfactory reply within 12 hours;
Q: The monitor and the computer are directly connected with one“ Type C to Type C ”
cable and it displayed “NO SINGAL” OR “ POWER SAVING”.
① Not all computers can support one “type c to type c” cable for power and singal transmission. Please check if your
device supports thunderbolt 3;
②If your computer does not support the Thunderbolt 3, you need to use “Type-C to HDMI” adapter to transfer singal
transmission. Please contact us and we will give you the most professional and satisfactory response within 12 hours;
5. Connect more HDMI devices
Function introduction
Video/Audio signal
Standard HDMI cable
Video/Audio signal
FAQ and Solution
External power is required
4K models require PD Power
External power is required
4K models require PD Power
Standard HDMI cable
Email: [email protected]Email: [email protected]
12 13

Q: The monitor and the mobile phone are directly connected with one“ Type C to Type
C ” cable and it displayed “NO SINGAL” OR “ POWER SAVING”.
① Not all mobile phones can can support one “type c to type c” cable for power and singal transmission. Please check if
your device supports USB 3.1;
②If your mobile phone does not support the USB 3.1 , you need to use an “I-O-S/Android to HDTV” cable for singal
transmission. You can also contact us to get it and we will give you the most professional and satisfactory response within
12 hours;
① Check if the device is the default extension mode. If it is the default extension mode, Change to Copy Mode / Mirror
Mode and the screen will appear;
②If possible, you can try to connect the monitor with your another device, if no singal yet, please do as follows;
③The above methods still can't solve the problem. Please contact us. We will give you the most professional and
satisfactory reply within 12 hours;
①Make sure the cable is properly connected between the monitor and the connected device. Move away the electronic
equipment that may cause electronic interference;
②If possible, you can try to connect the monitor with your another device, if no singal yet, please do as follows;
③The above methods still can't solve the problem. Please contact us. We will give you the most professional and
satisfactory reply within 12 hours;
Q: Screen image colors do not look right (color blocks, color cast, etc.)
① Check the connection cable to make sure that no pins are bent;
② If possible, you can try to connect the monitor with your another device, if no singal yet, please do as follows;
③The above methods still can't solve the problem. Please contact us. We will give you the most professional and
satisfactory reply within 12 hours;
Q: Flicker appears on the screen
①
adapter.;
② If possible, you can try to connect the monitor with your another device, if no singal yet, please do as follows;
③The above methods still can't solve the problem. Please contact us. We will give you the most professional and
satisfactory reply within 12 hours;
FAQ and Solution
Q: Display resolution output less than 4k 60hz. This is not a Problem with the display.
①Please try to adjust the resolution to 4k in the device;
②Connect another device to see if the output resolution is 4k;
③
card is old and cannot support 4k, the resolution of the display output will also be lower than 4k. If you are convenient,
aging, and the display has no memory function?
① The display has a memory function;
② The cause of this phenomenon is that the monitor does not have an external power. The monitor does not have a
memory function in the energy-saving mode. You need an external power source to have a memory function;
Q: I can't adjust the brightness and contrast?
①The monitor can adjust the brightness and contrast;
②Please check if your monitor is running "RTS", "FPS", "GAME", "TXT", "MOVIE" mode in ECO, and check if HDR mode is
turned on. When these modes are turned on, the brightness contrast of the monitor is Fixed. You can adjust them by
Q: I cannot use the freesync function?
①No, you can use it;
② This function needs to be turned on in "GAME" mode;
You need to set your monitor to "GAME" mode, and please refer to the "OSD introduction" section of the manual;
FAQ and Solution
If there are other issues not mentioned, please contact us on Page 16 and
within 12 hours at the latest.
Email: [email protected]Email: [email protected]
14 15

Warranty Card
Dear Customer,
Thank you for purchasing from us!
We offer 100% money back guarantee in 30 days and replacement in 90 days, 12 months
warranty for any issue, professional tech support to ensure no-worry service.
Any query or problem, please contact us:
[e-mail]
Not
Satisfied
Contact us to get
them for free
Contact us for instructions
Contact us for
compensation
Contact us for free
replacement or refund
Quality Problem
Missing
Accessories
User Manual
Problem
Package
Damaged
Do Not Like It
keep in touch if you have any question
Contact us for free
replacement or refund
Satisfied
Product
Received
Email: [email protected]
16