UPERFECT UXbox X2 User manual

In order to ensure your safe use of this product, please read this
manual carefully before using this product and keep it properly.
16 Inch 2K 144HZ Portable Monitor
User Manual
PDS-1190-M160E02-NE
[email protected]
Email: [email protected]om

Table of contents
Chapter 01 Preparations
Checking the package contents
Monitor introduction
Product Appearance & Interface Function Introduction
Welcome!
TYPE-C signal transfer
Supported Devices & Models（Type-C ）
HDMI signal transfer
Chapter 03 Connecting
Chapter 02 Specications
Chapter 04 Setting Up(Windows10)
1.Extend Mode /Duplicate Mode/Display Mode
1-1.Way1: Set on the device’Display Settings
1-2.Way2: Set via Windows key + Pkeyboard shortcut
2.Rotate the Screen
BRIGHTNESS
IMAGE
COLOR TEMP.
OSD SETTING
RESET
MISC.
Chapter 05 Screen Adjustment
Chapter 06 Q&A
Chapter 07 Service Support
Chapter 01
Preparations
Portable Monitor
Power Adapter
Note:
•If any of the above items is damaged or missing, please
contact us immediately.
([e-mail]）
•The appearance of the components may dier from the images shown.
Checking the Package Contents
Standard HDMI Cable Type-C to Type-C Cable User Guide
[email protected][email protected]
Smart Cover
16 Inch 2K 144HZ Portable Monitor

Monitor Introduction
A & B: Full Featured Type-C Ports
For power & signal transmission
C: Mini HDMI Port
For signal transmission
D: 3.5mm Audio Jack
For earphones
E: Pulley Button
Scroll the Pulley button up on the main interface to open the volume menu, then scroll up and down
to adjust the volume.
Scroll the Pulley button down on the main interface to open the Brightness menu, then scroll up and
down to adjust the brightness.
Press the Pulley button to enter the OSD (On Screen Display) menu. Scroll the Pulley button up and down
in the menu to control the cursor, and press the Pulley button to Conrm.
F: Power/Back Button
Long press to turn on/o the monitor.
Short press to go back to the previous step.
Product Appearance & Interface Function Introduction
D
E
F
A
B
C
[email protected][email protected]
3.5mm Audio Jack
Mini HDMI Port
Power Button
Type C Port
Type C Port
Pulley Button
Type C Port
Type C Port
Mini HDMI Port
Pulley Button
3.5mm Audio Jack
Power Button

Step3: Fold the Leather cases part ”5” to part ”4” as shown.
C
45
45
Chapter 02
Specications
Black
M160E02
2560*1600
100%sRGB
1.07B(10Bit)
M4*4mm
Mini HDMI
Full-featureType C 3.1 Port * 2(Both Signal and Power)
3.5mm Headphone Jack
Color
Model
Resolution
Display Color
144HZ
Refresh Rate
Color Gamut
1200：1
Contrast
16:10/16:9
Ratio
500 cd/m²
Brightness
VESA
Interfaces
Installing the stand case
Step1: Place the holster as shown above,part“1”is magnetic.
A
Step2: Place the monitor as shown above,part“1”can be sticky.
B
D
Step4: Stand up the monitor and adjusttheangle
1 2 3
1 2 3
5
23
[email protected][email protected]

Laptop Model
Brand Model
Note: Please check the Type C port of your PC/Laptop whether supports audio and video signal
transmission(Thunderbolt3 ). If it is just a Type C for charging, you need connecting HDMI to
transmit signal.
Apple
Google
Lenovo
Dell
HP
ASUS
Huawei
Razer
More Brands
Macbook 12"、Macbook 13" 2017、MacbookPro 2016/2017/2018、New
Macbook Air 2018、iPad Pro 2018
ChromeBook Pixels、PielBook Pen、MagicBook
YogaC930、Yoga 5 Pro、Yoga 6 Pro、ThinkPad XI Carbon2017、Miix 720、
Legion Y7000/Y7000P/Y7000K
XPS13、XPS15、G3/G5/G7、Inspiron 5000/7000
Pavilion X2、EliteBook Folio G1、EliteBook 1050 G1
Microsoft Surface Book2
U306、U321 series、U4100、ROG series
Matebook D、Matebook X、Matebook X Pro、Matebook E、Matebook 13
Blade Stealth
Continuous update...
Brand Model
Samsung
Huawei
More Brands
S8、S8+、S9、S9+、S10、S10+、S10e、Note8、Note9
Mate10、Mate10 Pro、Mate20、Mate20 Pro、Mate 20X、Mate P20、Mate P20
Pro、HonorNot10、Mate P30、Mate P30 Pro
Continuous update...
TYPE-C signal transfer
Supported Devices & Models（Type-C ）
Note: For a more stable power supply, it is recommended to use our
original power adapter to power.
Mobile Phone Model
Note: Please check the Type C port of your phone whether supports audio and video signal
transmission ( USB 3.1 ).
Chapter 03
Connecting
[email protected][email protected]

HDMI signal transfer
Note: For a more stable power supply, it is recommended to use our
original power adapter to power. Note: If the Type-C port of your phone is not a full-featured Type-C port, or your phone
is micro USB port,Lightning port, for example: Google Pixel 3, you need to buy the adapter
as below. In order to enhance our customer experience, you can contact us, we will recommend for
you.
[email protected][email protected]

Extend Mode /Duplicate Mode/Display Mode
Way1: Set on the device’Display Settings
A: Verify that your cables are connected properly to the new monitors.
B: Right-click anywhere on your desktop and select Display settings to open the Display page.
C: Scroll down to Multiple displays, then select an option from the drop-down list to determine
how your desktop will display across your screens. For the largest work area, select Extend
desktop.
Note: If you cannot see the additional monitor(s) listed, click Detect. If does
not work, try restarting your computer and do steps again.
Way2: Set via Windows key + Pkeyboard shortcut
A: Verify that your cables are connected properly to the new monitors.
B: Enter the“Windows”key and “P”keyboard at the same time.
C: select an option from the drop-down list to determine how your desktop will display across
your screens. For the largest work area, select Extend desktop.
Note: If you cannot see the additional monitor(s) listed, click Detect. If does
not work, try restarting your computer and do steps again.
PROJECT
PC screen only
Duplicate
Extend
Second screen only
Settings
Home
Find a settingSystem
Display
Sound
Notications & actions
Focus assist
Power & sleep
Storage
Tablet mode
Multitasking
Projecting to this PC
Shared experiences
Clipboard
Remote Desktop
Display
Sign out now
Change the size of text,apps,and other items
125%
Andvanced scaling settingsResolution
2560*1600
Orientation
Landscape
Rotation lock
on
Multipe displays
Duplicate these displays
Extend these displays
show only on 1
show only on 2
Chapter 04
Setting Up(Windows10)
DuplicateMode
Dxtend Mode
Showmonitor
onlyon 1
Showdesktop
onlyon 2
[email protected][email protected]

Rotate the Screen
Note: If you cannot see the additional monitor(s) listed, click Detect. If does
not work, try restarting your computer and do steps again.
Pulley Button - Setting Parameters
After turning on the power, press the pulley button to enter the menu setting, image
adjustment, brightness, color setting, OSD setting, reset, etc. at your own convenience
For example:
Backlight (brightness) setting
①Press the menu button to start installing the monitor.
②Scroll the menu button up and down to move to the image installation.
③Press the menu button again to enter the image settings.
④Scroll the menu button up and down to move to the backlight.
⑤Press the menu button again to enter the backlight setting.
⑥You can adjust the brightness by scrolling the menu button up and down.
You can set up other installations in the same way.
1: Verify that your cables are connected properly to the new monitors.
2: Right-click anywhere on your desktop and select Display settings to open the Display page.
3: Under the "Select and rearrange displays" section, select the monitor that you want to adjust.
4: Under the "Scale and layout" section, use the Orientation drop-down menu to select
Landscape or Portrait screen.
On-Screen Display Menu Introduction
Settings
Home
Find a setting
System
Display
Sound
Notications & actions
Focus assist
Power & sleep
Storage
Tablet mode
Multitasking
Projecting to this PC
Shared experiences
Clipboard
Remote Desktop
Display
HDR and WCG
O
HDR and WCG settings
Scale and layout
Change the size of text,apps,and other items
125%
Andvanced scaling settings
Resolution
2560*1600(Recommended)
Orientation
Landscape
Portrait
Landscape(ipped)
Portrait(ipped)
Extend desktop to this display
Make this my main display
Andvanced display settings
Graphics settings
Chapter 05
Screen Adjustment
[email protected][email protected]
BRIGHTNESS
Picture
Contrast
Black-equallzer
Game Mode Standard
Brightness
50
50
57
COLOR TEMP
Temperature
Red
Green
Blue
Temperature User
50
50
50

Chapter 06
Q&A
SAVE SETTINGS
How to save all the settings of the monitor?
1.If it is an HDMI signal source, the monitor settings can be directly
2.If it is a TYPE C signal source, the monitor need to connected to an external power supply rst,
then you can save the settings.
Abnormalconditionsoccurred-likethesplashscreenorspotswhenusingthe
monitor.
1.Thissituationisgenerallycausedbyinsucientvoltage;Pleasecheckwhetherthe
factory-packedcablesareused,andthencheckwhetheranexternalPDpowersupplyis
used.Thepowerconsumptionof2Kmonitorisrelativelylarger,andanexternalPDpower
supplyisrequired.
2.Iftheresolutionsabovedonotwork,pleasetryanothercomputerdevice.Ifitfailed,
pleasecontactusforthereplacementofthecable.
ThedisplayisTURN-ON,shows"NOSIGNAL"or"POWERSAVING".
1.PleasecheckifthemobilephoneorcomputersupportsUSB3.1./Thunderbolt3when
youareusingType-CtoType-Ctoconnect.IFNOT,AnHDMIAdapterisrequiredtotransfer
thesignal(theComputer)or3in1USBTypeCHDMICableAdapterisrequiredtotransfer
thesignal(themobilephone)
2.Pleasecheckwhethertheconnectioniscorrect.Pleaseusethegenuinecableprovided.
3.Themonitorbatteryislow,pleaseuseexternalpoweradaptertosupply
4.Pleasetryanothercomputer.Ifitfailed,pleasecontactusforthereplacementofthe
touchcable.
MyphoneisaGooglebrand,butIcannotconnectitdirectlytothedisplay？
SomeGooglephonescannotbeconnecteddirectlytothedisplay. The
mobilephoneinterfaceneedstosupportUSB3.1inordertoconnectdirectlytothedisplay.
Pleaseconrmifyourmobilephonesupportsit.Ifnot,youneedtopurchasethe"IOS/
AndriodtoHDTV"cable.Ifyouneed,youcantellusandwewillsendittoyou.
Q:
A:
Q:
A:
Q:
A:
[email protected][email protected]
Option
Source
Language
AspectRatio
Volume
English
Auto
Auto
80
Advance
UltraHDRMode
EyeProtection
3D Sound
Crosshair
o
Auto
o
o
RESET
LANGUAGE
OSDSetting
H.Position 100
100
10
0
v.position
menutime
Transparency
OSDSetting
Reset
Reset
AutoColor Adjust
Autolmage Adjust
Advance
Color Eect
Saturation
Hue
Sharpness
DispRotate
o
o
Color Eect
Information
Type-C
[email protected]
H,67.5KHzPCLK;148.5Mz
Information
50
50

Chapter 07
Service Support
Mycameraandmonitorareusedtogether,butthereisnodisplay.WhatcanI
do?
①Notallcamerascanbedirectlyconnectedtothemonitor,itisdeterminedby
thecameramodel.
②Pleasetellusyourcameramodelandinterface,wewillhelpyousolveitwithin
12hours.
The monitor is constantly restarting.
1. It is caused by an insucient power supply. Monitor required large power
support. Please use the attached genuine cable provided to power the monitor.
2. If use the mobile power bank to power the monitor, please conrm whether the
mobile power bank is a PD power bank that has reached 30W or more. Please
contact us if you need a power bank.
3. If the resolutions above do not work, please try another computer device. If it
failed, please contact us for the replacement of the cable
Q:
A:
Q:
A:
Dear Customer,
Thank you for purchasing the Portable USB Monitor!
We oer 100% money back guarantee in 30 days and 90 days replacement, 12 month
warranty for any issue, professional tech support to ensure no-worry service.
Any query or problem, please contact us via
[email protected]
Product
Received
Satised keep in touch if you have
any question
Quality Problem Contact us for free
replacement or refund
Not
Satised
Do Not Like It Contact us for free
replacement or refund
User Manual
Problem
Contact us for
instructions
Missing
Accessories
Package Damaged
Contact us to get
them for free
Contact us for
compensation
[email protected][email protected]