Uplift Desk ACC092 User manual

Laptop Mount
ACC092
For assembly assistance,
visit upliftdesk.com/contact,
call 800-349-3839,
or email [email protected]
©2023 UPLIFT Desk®. All Rights Reserved
Scan QR code for
product webpage

2
Under no circumstances does the manufacturer accept warranty or liability claims for
damages caused from improper use of this product. Please provide these instructions to any
new user or owner of the product.
CAUTION: Read all instructions before assembly. Failure to assemble or operate properly may result
in damage or personal injury. Retain manual for future reference.
CAUTION: Make sure the supporting monitor arm will safely hold the combined weight of the
Laptop Mount (2.4 lb) and laptop.
Safety and Warnings
Laptop Mount M4 x 8mm Machine
Screw
qty 4
#10-24 x ¾" Machine Screw
#10 x ¾" Wood Screw
M4 x 8mm Machine Screw M4 Flat Washer
#10-24 x ¾" Machine Screw
M6 x 10 Hex Drive Flat Head Screw
M8 x 10 Machine Screw
M8 x 8 Set Screw
M6 x 10 Machine Screw
#10 Washer
M4 Flat Washer
qty 4
#10-24 x ¾" Machine Screw
#10 x ¾" Wood Screw
M4 x 8mm Machine Screw M4 Flat Washer
#10-24 x ¾" Machine Screw
M6 x 10 Hex Drive Flat Head Screw
M8 x 10 Machine Screw
M8 x 8 Set Screw
M6 x 10 Machine Screw
#10 Washer
Package Contents
Phillips Head Screwdriver
You’ll Also Need

3
© UPLIFT Desk • 800-349-3839 • [e-mail] • upliftdesk.com
Step 1 - Attach VESA Plate
A. Ensure the bottom edge of the VESA plate faces
towards the bottom edge of the Laptop Mount with the
support lip.
B. Align the 75mm spaced holes on the monitor arm VESA
plate with the threaded attachment holes on the back
of the Laptop Mount.
C. Loosely thread an M4 x 8mm Machine Screw through
each M4 Flat Washer, VESA plate hole, and the holes on
the Laptop Mount.
Step 2 - Attach Laptop Mount
A. Position the Laptop Mount with the attached
VESA plate above the monitor arm.
B. Attach the VESA plate to the monitor arm and
lock into place per the instructions included with
your monitor arm.
These instructions show the Laptop Mount attached to an UPLIFT Crestview Monitor Arm and VESA plate. Monitor arm and
VESA plate designs vary.
Refer to the instructions provided with your monitor arm for attachment of the VESA plate to the monitor arm.
Assembly Instructions
D. Once all four screws are started, use a Phillips Head
Screwdriver to tighten the screws until they are snug.
Be careful not to overtighten.

4
Ensure the VESA plate is securely attached and locked
into the monitor arm.
Step 3 - Insert Laptop
A. Position the Laptop Mount at an angle similar
to what is shown to accept the laptop.
B. Position the bottom edge of the laptop on the lip
at the bottom of the Laptop Mount as shown.
C. Pull the spring loaded Laptop Mount side grips
outward so they are wide enough to allow the laptop to
rest ush against the Laptop Mount surface.

5
© UPLIFT Desk • 800-349-3839 • [e-mail] • upliftdesk.com
Step 4 - Adjust angle, height, and distance
Adjust the height, tilt, distance, and horizontal alignment of your laptop screen to reduce stress on the neck, shoulders,
and torso.
A. Height: Make sure that the top line of your screen is at or just below eye level. Tilting your head backward to read the
screen leads to neck discomfort.
B. Distance: Place your laptop screen roughly an arm’s length (ngertip reach) away. Positioning the screen too far away
will cause you to have trouble seeing the screen, and your eyes will pull your head forward causing you to extend your
neck, often leading to neck, back, and shoulder discomfort.
C. Angle: Adjust screen angle to minimize glare from lights and windows.
D. Gently release the side grips, allowing them to clamp
the laptop in place on the Laptop Mount.

6
Notes

7
© UPLIFT Desk • 800-349-3839 • [e-mail] • upliftdesk.com
Notes

SAVE THE INSTRUCTIONS
Study this manual carefully. If this product is sold, please provide this
manual to the buyer, installers, or support personnel operating the product.
Work Better. Live Healthier
AI-ACC092-1.0
Copyright Notice: This guide is a component of this UPLIFT Desk product. This guide is a part of
the scope of delivery, even if the item is resold. This guide is also available on the UPLIFT Desk
website: upliftdesk.com. These specications are subject to United States copyright law.
©
upliftdesk.com
[email protected]
800-349-3839
512-614-3152