Urbanworx UUB-8W User manual

INSTRUCTION
MANUAL
Please read this manual carefully before using, and keep it for future reference.
PORTABLE
USB BLENDER
UUB-8W

General Safety 4
Before first use 6
Product Overview 7
Basic Operation 8
Cleaning 9
Specification 10
Customer Support Last Page
CONTENTS

4
GENERAL SAFETY
Read this manual thoroughly before you start using the blender.
Store this manual, the completed warranty card, your receipt and the product
packaging.
The safety precautions instructions reduces the risk of fire, electric shock and
injury when correctly complied to.
Please follow all instructions and take notice of all warnings.
• Do not expose this product to rain or moisture.
• Do not temper or change or modify the product in any way.
• Only use Accessories outlined and recommended by the manufacturer.
• Please do not expose the product to splashing or water contact
IMPORTANT INFORMATION
• The apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the product. Dry location
use only.
• No naked flame source, such as candles, should be placed on the product.
• This appliance is not to be used by persons (including children) with reduced
physical, sensor or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction.
Children being supervised not to play with the appliance.
• Do not place the base of the blender into water to wash it. This product is not
waterproof and will damage the product if not handled correctly.

5
GENERAL SAFETY (CONT.)
• If you notice any unusual odors or smoke around the unit, immediately
turn o the device and contact the service center. Failure to do
so may result in fire or electric shock.
• Please beware that Dust could accumulate over time on the unit and cause it
to generate heat and or deteriorate insulation, which in turn may result in an
electrical fire.
• To maintain the product do not use any chemical or cleaning agent or wet
cloth, please only ensure to utilize a dry cloth to wipe it down from marks or
dust and only after unplugging the product from the power socket.
• Please ensure to contact our call center for any repair or service required for
the products.
Please make sure upon positioning this product, the place is:
• Not wet or damp and Well ventilated
• Away from direct sunlight or heaters.
• Away from splashes or food.
• Protected from excessive dust or grease.
• Do not place the Product near heat sources such as radiators, stoves or other
audio visual equipment that produce heat.
• Do not place small metallic objects on top of the unit.
• Do not use or store flammable or combustible materials near the unit. Doing so
may result in fire or explosion. Do not place any naked flame sources, such as lit
candles, cigarettes or incense sticks on top of the product.

6
GENERAL SAFETY (CONT.)
Before first use
• Unpack the product and accessories and ensure all parts of the product
are undamaged and in good working order.
• Plastic wrapping can be a suocation hazard for babies and young
children, so ensure all packaging materials are out of their reach and
disposed of safely.
• Unwind the USB cord to its full length and inspect it for damage
before each use. Do not use the product if it or its cord has been damaged
or is not working properly. In case of damage, contact our after sales sup
port line for advice on examination, repair or return of the damaged product.
• Ensure the product is not exposed to direct sunlight or placed near a
heater or other heat source.
WARNING
• Make sure children do not use this product.
• When unscrewing the container from the blender base, make sure to place the
base with the blades in a safe area, out of reach from person(s) or children.
The blades are sharp and will cause harm if not handled carefully.
• The container is seperate from the blender base with blades,
DO NOT unscrew the container while in use upright. Make sure to turn
blender upside down before unscrewing the container, otherwise the
contents will spill.
MAGNETIC SAFETY DESIGN
This product has a magnetic safety design, when the container is not attached
to the base of the blender, the device will not power on.

7
PRODUCT OVERVIEW

8
BASIC OPERATION
FIRST TIME USE
- Make sure the blender is charged
before using for the first time.
1. Unscrew the lid and place your
ingredients into the blender.
- Make sure to tighten the lid
so that it does not leak.
2. Press the power button to turn
on the blender.
- Wait until you are satisfied with
the blended contents inside.
- Press the power button again to
turn o the device.
3. Open the top transparent lid and
drink your blended drink!
Note: The blender will only spin for
40 seconds before automatically
turning o.
DO NOT (PRODUCT)
- Do not place too much contents inside the blender.
- Completely filling the blender container (high load) then
blending the contents may cause damage to the product
mechanisms inside the base of the blender which will then
reduce the durability of the product over a period of time.
DO NOT (CLEANING)
- Do not disinfect accessories of the product or clean
with hot water.
- Do not wash it with steel/mesh sponge.
- Do not clean with any corrosive cleaners,
- Do not place in the dishwasher
1
2
3

9
CLEANING
CLEANING (Option 2)
- Once you have completely finished
your drink, you can action the
following steps to clean your blender.
- Make sure the transparent lid at
the top is closed before you turn it
upside down.
4. Turn the blender upside down.
5. Unscrew the container body from
the base of the blender.
6. You can now wash and rinse the
container body and blade on the
base of the blender.
NOTE:Please be careful when cleaning
the blades, they are sharp and will cut
you if not handled carefully.
CLEANING (Option 1)
- Once you have completely finished
your drink, you can action the
following steps to clean your blender.
1. Unscrew the lid.
2. Fill the container with water.
3. Turn on the blender for 10
seconds (press power button
again to turn o) to clean inside
the container and the blades.
- If inside blender and blades still
not clean, repeat this a few times
other please follow option 2 below.
4
1
2
3
5

10
SPECIFICATIONS
Li-ion Battery 1800mAh * 2
Input DC 5V/1A
Weights Net: 0.5 kg / Gross: 0.6 kg
Dimensions 86 (w) x 86 (d) x 230 (h) mm
INFORMATION
Troubleshooting
If your products stops working, contact our call centre
at [e-mail].
Do not attempt to open and repair the unit yourself.

11

CUSTOMER HELPLINE:
[e-mail]
DISTRIBUTED BY:
Ayonz Pty Ltd