Urrea 8LR User manual

¡ATENCIÓN! Lea, entienda y siga las
instrucciones de seguridad
contenidas en este documento antes
de operar este producto.
Póliza de garantía. Este producto está garantizado por URREA HERRAMIENTAS PROFESIONALES, S.A. DE C.V., km 11,5 Carr. A El Castillo, 45680 El Salto, Jalisco. UHP900402Q29, Teléfono 01 33 3208-7900 contra defectos de
fabricación y mano de obra con su reposición o reparación sin cargo por el periodo de 2 años. Para hacer efectiva esta garantía, deberá presentar el producto acompañado de su comprobante de compra en el lugar de adquisición
del producto o en el domicilio de nuestra planta mismo que se menciona en el primer párrafo de esta garantía. En caso de que el producto requiera de partes o refacciones acuda a nuestros distribuidores autorizados. Los gastos
que se deriven para el cumplimiento de esta garantía serán cubiertos por Urrea Herramientas Profesionales, S.A. de C.V. Esta garantía no será efectiva en los siguientes casos: a).- Cuando la herramienta se haya utilizado en
condiciones distintas a las normales. b).- Cuando el producto hubiera sido alterado de su composición original o reparado por personas no autorizadas por el fabricante o importador respectivo.
IMPORTADO POR: URREA HERRAMIENTAS PROFESIONALES S.A. DE C.V. km 11,5 Carretera a El Castillo, C.P. 45680 El Salto, Jalisco, México Tel. 01 (33) 3208-7900 Made in China / Hecho en China R.F.C. UHP900402Q29 04-H17
Linterna Reflector LED
LED Spotlight
8LR
ATENCIÓN: Lea, entienda y siga las instrucciones de seguridad contenidas en este documento antes de operar este producto.
MODO DE OPERACIÓN
Asegúrese de que la linterna se encuentra
apagada y que el seguro de bloqueo está
activado .
Conecte el cargador para corriente alterna o
el cargador para auto a la linterna en la
salida de 9V y conecte la clavija del cargador
a una toma de corriente alterna o al
encendedor del auto, según sea el cargador a
utilizar. El LED indicador de carga encenderá
una vez que comience la carga de la batería.
Permita que la linterna cargue totalmente, lo
cual se indicará una vez que el LED indicador
cambie a color verde. Una vez realizada la
carga, desconecte el cargador de la toma de
corriente y de la linterna. El cargador para
auto se conecta a la toma de corriente
directa de 12V.
1
2
3
Antes de usar retirar de protector del lente.
Asegúrese de que el seguro está abierto .
Presione el botón de encendido para accionar la linterna, y deje de presionar para apagarla.
Para activar el seguro en posición de encendido, mantenga presionado el gatillo y presione el
seguro . El seguro se mantendrá puesto hasta que se presione el desbloqueo del seguro .
Utilice los botones mientras la linterna está encendida para ajustar el flujo luminoso a mayor
o menor.
•
•
•
•
•
RECARGA DE BATERÍA
Linterna
Fuente luminosa: LED (10 W)
Corriente máxima: 2,5 A
Batería recargable de litio 3,7 V
Para uso en interiores
Flujo luminoso: 1 000 lumens
Temperatura de color: 6500K
Consumo energético: 0,0115 kWh
ESPECIFICACIONES TÉCNICAS
Mantenga siempre la batería totalmente cargada después de haberse utilizado.
Para un mejor rendimiento de la batería, asegúrese de que esté cargada
totalmente antes de cada uso.
1
2
CUIDADO Y MANTENIMIENTO
¡IMPORTANTE! Antes de recargar la batería por primera vez, utilice la linterna hasta que el
flujo luminoso emitido sea muy bajo. Cada recarga completa de la batería, proporciona
aproximadamente 2 hrs. de uso continuo. La linterna cuenta con un indicador de batería baja,
una vez que esta encienda, apague la linterna y recargue la batería. NUNCA DESCARGUE
TOTALMENTE LA LINTERNA.
¡IMPORTANTE! Apague la linterna antes de recargarla. Mantener encendida durante el
proceso de recarga, dañará de forma permanente el producto. Sólo utilice el cargador
incluido con el producto.
CONTENIDO
Linterna LED recargable
(batería incluida)
Cargador 100-240 V~
Cargador para
automóvil 12V
Lente
Correa
1
1
1
1
1
INFORMACIÓN DE SEGURIDAD
Nunca coloque la linterna hacia abajo (sobre
la pantalla) mientras esté encendida o justo
después de haber sido apagada ya que la
pantalla se calienta durante su uso. Apague
la linterna cuando no esté en uso.
Desconecte siempre el cargador del contacto
eléctrico cuando no esté siendo utilizado.
Nunca ilumine directamente a los ojos, ya
que puede ocasionar serios daños.
NO toque la pantalla de la linterna durante o
justo después de haber sido utilizada ya que
puede ocasionar quemaduras.
NO exponga el producto ni sus componentes
al agua.
Este aparato no se destina para utilizarse por
personas (incluyendo niños) cuyas
capacidades físicas, sensoriales o mentales
sean diferentes o estén reducidas, o carezcan
de experiencia o conocimiento, a menos que
dichas personas reciban una supervisión o
capacitación para el funcionamiento del
aparato por una persona responsable de su
1
2
3
4
5
6
seguridad. Los niños deben supervisarse para
asegurar que ellos no empleen este aparato
como juguete.
NO cargue o utilice la linterna cerca de
combustibles o materiales inflamables.
NO cargue la linterna en lugares cerrados
con presencia de gas.
NO use el cargador ni la linterna si el cordón,
la clavija, la batería, o cualquier parte está
dañada.
NO utilice el cargador en exteriores para
recargar la batería.
Para prevenir un corto eléctrico se
recomienda siempre utilizar un receptáculo
con conexión a tierra.
Utilice únicamente el cargador incluido en
este producto para evitar un daño en el
mismo.
NO abra ni dañe la batería.
NO exponga la batería al fuego ya que
puede explotar.
NO utilice la linterna mientras está siendo
recargada. El hacerlo puede provocar daños
permanentes en la misma.
7
8
9
10
11
12
13
14
15
Indicador LED
de carga
LED Indicator light
Entrada para
cargador de 9V
9V DC Port
Seguro
Trigger lock
Gatillo
Trigger switch
Botones para
ajustar el brillo
Buttons to
adjust brightness
*Nota: Al apagar la linterna
el flujo luminoso se ajustara
automáticamente a su
máxima capacidad.
Cargador
Entrada: 100-240V~50/60 Hz 150 mA
Salida: 9V 1A 11,5 W
Tiempo de uso continuo: 2 horas
Recargar durante 4-5 horas
Tiempo de vida del LED: 10 000 horas

WARNING!: Read, understand and
follow the safety rules in this
document before operating this
product.
This product has a 2 years warranty by Urrea Herramientas Profesionales S.A. de C.V. against any manufacturing defect. The warranty is not applicable if the product does not show the URREA brand, if the product is worn out by its
daily use, shows signs of abuse, damage, its original composition has been altered, or specifies a different warranty. In order to make the warranty effective, the product must be taken to the company or to the place of purchase
along with its receipt.
IMPORTED BY: URREA HERRAMIENTAS PROFESIONALES S.A. DE C.V. km 11,5 Carretera a El Castillo, C.P. 45680 El Salto, Jalisco, México Tel. 01 (33) 3208-7900 Made in China / Hecho en China R.F.C. UHP900402Q29 04-H17
LED Spotlight
Linterna Reflector LED
8LR
WARNING!: Read, understand and follow the safety rules in this document before operating this product.
OPERATION
Make sure the trigger switch is not locked
ON ( ).
Plug the AC charger or Car charger into
the 9V DC port of the spotlight. The LED
indicatorwill turn on when charging from
both AC and Car chargers.
Allow the battery to fully charge. The LED
indicator on the spotlight will automatically
turn green when the battery fully charged.
For Car Charger - 12-Volt Car Charger
operates from a DC receptacle for charging
the battery.
1
2
3
Remove lens protector before using.
Make sure the trigger lock is in the correct position .
Press the trigger switch in the handle once to turn the spotlight ON. Release the trigger switch to
turn the spotlight OFF.
To lock the spotlight in the ON position, press the trigger switch and hold, then press the trigger
lock to the position.
The spotlight will stay on until the trigger lock is pressed to the position.
Press the buttons with to adjust light brighter or dimmer.
•
•
•
•
•
RECHARGING THE BATTERY
Flashlight
Lighting source: LED (10 W)
Maximum current: 2,5 A
Rechargeable 3,7 V lithium battery
For indoor use only
Luminous flux: 1 000 lumens
Color temperature: 6500K
Energy consumption: 0,0115 kWh
TECHNICAL SPECIFICATIONS
Always keep the battery fully charged when not in use.
For best results, fully charge the battery after each use. This will prolong the
overall life of the battery.
1
2
CARE AND MAINTENANCE
IMPORTANT! Battery is ready to use when purchased, do not recharge before first use.
A fully charged battery will provide approximately 2 hours of continuous light. Do not allow
the battery to completely discharge. A dim light indicates a low battery. Turn OFF the
spotlight and recharge the battery as soon as possible.
IMPORTANT! Unlock and turn the spotlight OFF before charging from an AC or DC outlet.
Leaving the spotlight ON during charging may cause damage to the battery and AC
charger.Only use charging devices that are provided with the LED Spotlight or its
replacements.
CONTENT
Rechargeable LED spotlight
(battery included)
100-240 V~ charger
12V car charger
Detachable red lens
Wrist cord
1
1
1
1
1
SAFETY INFORMATION
Never place the spotlight face down when
light is on or is still hot from recent use.
Doing so could burn/ignite surfaces such
as seats, carpeting, etc. and cause major
property damage. Always turn the spotlight
off when not in use.
Always unplug the charger from the and
power source when not in use.
To prevent serious damage to eyesight,
never look into the light when the is on.
DO NOT shine light into the face of
someone else.
DO NOT touch the lens of the spotlight
when light is on or if it was recently on.
The lens will be hot and could cause
serious burns.
DO NOT place the spotlight in water.
Keep all components dry and out of
water at all times. Dry location use only.
DO NOT allow children to handle or
operate this spotlight.
1
2
3
4
5
6
DO NOT use this product for other than
its intended use.
DO NOT charge or operate in close
proximity of combustible or flammable
materials.
DO NOT charge battery in gas tight
enclosures.
DO NOT attempt to charge or operate
this spotlight if cord, plug, battery, bulb
or any part of the spotlight is damaged
or corroded.
DO NOT use an outdoor AC outlet to
recharge battery.
To prevent accidental electrical shock we
recommend this product always be
charged on a GFCI (Ground Fault Circuit
Interrupter) outlet.
Only use charging devices that are
provided with the LED Spotlight or
its replacements.
DO NOT disassemble or tamper with
the battery.
DO NOT dispose of battery in fire as this
may result in explosion.
DO NOT use the spotlight while it is charging
7
8
9
10
11
12
13
14
15
16
Led indicator light
Indicador LED
de carga
9V DC Port
Entrada para
cargador de 9V
Trigger lock
Seguro
Trigger switch
Gatillo
Buttons to
adjust brightness
Botones para
ajustar brillo
Charger
Input: 100-240V~50/60 Hz 150 mA
Output: 9V 1A 11,5 W
Discharging time: 2 hours
Recharge for 4-5 hours
LED lifetime: 10 000 hours
Table of contents
Languages:
Popular Spotlight manuals by other brands

Chicago Electric
Chicago Electric 65350 Instructions and precautions

Eternal Lighting
Eternal Lighting WPL240BS installation instructions

Havis-Shields
Havis-Shields QUESTAR CD-QS-1 parts list

Beta
Beta 1837M Instructions for use

MOLTO LUCE
MOLTO LUCE 2GO Mounting instruction

Westinghouse
Westinghouse Q01BM1740-08 user manual