Us & Coutumes B3 User manual

B3 - Assembly instructions

© 2015 - Us & Coutumes
B3 - Assembly instructions
2
2.
Parts list
Handles: 2x
Legs: 2x
Seat: 1x
Tensioner: 1x
Screws: 4x
Hex key 1x
Shelf: 1x
Tensioner: 1x. Only provided with 48 in.
benches.

© 2015 - Us & Coutumes
B3 - Assembly instructions
3
2.
1.

© 2015 - Us & Coutumes
B3 - Assembly instructions
4
3.
Lower shelf until it ts tight in
between the legs
That’s it, you’re done!
Place the shelf trusses so they are
outside of the legs, starting from
the narrow part, underneath the
seat.

© 2015 - Us & Coutumes
B3 - Assembly instructions
5
4. 48 in. benches
Screw the wing nuts so
the rods sit deeper into the wood
block.
This allows to shorten the overall
length of the tensioner unit so
you can insert it between the shelf
trusses.
If it’s not already done, place the
two threaded rods and wing nuts
into the wood block so you get the
same assembly as the image to the
left.

© 2015 - Us & Coutumes
B3 - Assembly instructions
6
5. 48 in. benches
Align the tensioner rods with the
holes located in the middle of the
shelf trusses, on the interior side.
Unscrew the nuts until the tips of
the rods reach the bottom of the
holes pierced in the trusses.
The more you unscrew the nuts, the
more the trusses spread. Adjust the
nuts so the trusses are parallel to
each other.

© 2015 - Us & Coutumes
B3 - Assembly instructions
7
Need help?
You’re done!
For any questions or request about your order or if you think there’s something missing in the box, contact us by
email. We’ll respond quickly, as always. Be sure to write your order’s number and your name in the email title.
[email protected]
www.usetcoutumes.com
2025A Masson, suite 001A
Montreal, Qc, Can
H2H 2P7