US TECHNOLOGY MIAMI SOUTH AMERICA INC Dream maker F-BS001 User manual

F-BS0001 User Manual
Thank you for choosing our smart lamp speaker Dream
maker F-BS001, a perfect combination of Bluetooth stereo
speaker and mood light.
Please read this manual before usage.
Specifications
·Item NO. : F-BS001
·Input: DC5V/500mA
·Frequency range: 20HZ-20KHZ
·SNR: ＞90dB
·Profile support: HSP/HFP/A2DP/AVRCP
·Wireless frequency: 2.40GHz~2.48GHz
·Wireless transmit power: Class II (-6dBm~+4dBm)
·Product size: 67.5*65*63（mm）
·Weight: 191g
·LED power: 0.6W
·Distortion: <0.5%
·Battery capacity: 3.7V/750mAh
·Bluetooth version: 4.0

·Main material: ABS
·Charging time: 2.5 hours
·Playing time: about 6 hours (normal volume)
·Transmission distance: 10m
Instructions
Charging
·Please make sure that the smart lamp speaker is fully
charged before first use.
·Connect the product with USB cable.
·The indicator will show red light when charging.
·The indicator will turn off when fully charged.
·The speaker will turn off automatically in 30 minutes

without connected with any device.
·Support major smart phone (iPhone/iPad/iPod/MIUI etc.)
battery indicate.
Bluetooth pairing
·Play music from Bluetooth enabled devices, like smart
phones, tablet PC, computer and etc.
·Press and hold for 3 seconds to turn on the speaker
and enter bluetooth pairing mode, indicator flashing with
blue light.
·Search “F-BS001” on your devices’ Bluetooth list, and
select it to pair with the speaker. When paired successfully,
there is a sound prompt and the blue LED flashes twice
every 5 seconds.
·After paired, please play music from the Bluetooth
enabled device.
·Long press to turn off the speaker with a prompt
and blue LED light.

Noted:
1.If your device connected with your speaker
unsuccessfully, please turn off and restart.
2. When turn on the speaker, it will pair with the last paired
device automatically. If it couldn’t pair, it will enter the
Bluetooth mode.
APP Install
·iphone download from the APP store called “caixia jiang”.
·Android phone download by scan below QR code.

APP Features
·Smart light control
·Smart music play
·Smart timing
I. Light timing
II. Music timing
III. Alarm clock
Noted:
·You need to pair with speaker again to enter into APP
after smartphone was connected with speaker.
·Support smartphone above Android 4.0

LED Control
·Long press the next song button to increase the
brightness of current color, until the lightest.
·Long press the previous song button to dim, until the
darkest.
·Touch the top metal of the speaker, and blue, green,
rainbow, red and lights out change in turn.
Play music via Line-in cable
Connecting speaker to audio device by 3.5mm line-in
cable, the LED light will stay blue, music in the audio
device will be played.
Hands free calling
·Short press to answer the call.
·Short press “volume+” or “volume-” button to reject the
call, a beep will prompt.
·If you want to end the talk during the call, short press ,
a beep will prompt.
·Double click to redial the last number of your
smartphone.

LED Indicator Status
Power on Blue LED lights 1 second
Power off Blue LED light flashes 1
second
Pairing Blue LED flashes
continuously
Incoming call Blue LED flashes
continuously
Dial call number Blue LED flashes
continuously
Talking Blue LED flashes twice every
3 seconds
Music play Blue LED flashes twice every
3 seconds
Standby(with bluetooth) Blue LED flashes twice every
5 seconds
Charging Red LED light
Charged Red LED light turns off
Low battery Red LED light flashes once
every 2 seconds

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.