usi MCN108L User manual
Table of Contents:
Page #
What You Should Know About CO .........................................................2
What You Should Know About Natural Gas............................................2
Recommended Location of Alarms.........................................................2
Basic Safety Information.........................................................................3
Where Alarm Should Not Be Installed ....................................................4
Installation Instructions...........................................................................5
Electrical Shock Hazard .........................................................................5
Locking / Tamper Feature.......................................................................5
Wiring Instructions..............................................................................5, 6
Operation, Testing & Maintenance .........................................................7
QUICK FIND®Alarm Originating Feature & Reset .................................8
What To Do If The Alarm Sounds ...........................................................8
CO Alarm Silence Feature......................................................................9
Testing & Maintenance .....................................................................9, 10
Battery Backup Replacement...............................................................10
CO & Natural Gas Alarm Limitations .................................................... 11
Operational Summary.....................................................................12, 13
Warranty ................................................................................ Back Cover
MODEL MCN108, MCN108L
CARBON MONOXIDE ALARM AND
NATURAL GAS ALARM
WITH SILENCE FEATURE
THANK YOU for purchasing this combination alarm. This manual includes important information
regarding where to install the alarm, how to operate, maintenance, testing and product features. It
also includes tips and information which could help protect you and your family.
PLEASE READ AND SAVE!
288-3508-07
©2012 UNIVERSAL SECURITY INSTRUMENTS, INC., Rev. 07/2016 CD
Printed in China
SEVEN-YEAR LIMITED WARRANTY
MODELS MCN108 and MCN108L
86,(OHFWULF,QF8QLYHUVDO6HFXULW\,QVWUXPHQWV,QF³86,´ZDUUDQWVWKLVSURGXFWWREHIUHHIURP
defects in material and workmanship for a period of seven (7) years from the date of purchase.
This warranty shall not apply to any batteries used in the product or to any damage which may be
caused by such batteries. This warranty applies only to the original consumer purchaser and only
to products used in normal residential use and service. If this product is found to be defective,
USI’s only obligation, and your exclusive remedy, is the repair or replacement of the product, at
USI’s discretion, provided the product has not been damaged through misuse, abuse, accident,
PRGL¿FDWLRQVDOWHUDWLRQQHJOHFWRUPLVKDQGOLQJ7KLV:DUUDQW\VKDOOQRWDSSO\WRDQ\SURGXFWZKLFK
LVIRXQGWRKDYHEHHQLPSURSHUO\LQVWDOOHGVHWXSRUXVHGLQDQ\ZD\QRWLQDFFRUGDQFHZLWKWKH
instructions supplied with the product.
ALARM RETURNS
For replacement of this alarm under the terms of this Warranty, contact Customer Service at
'HSDUWPHQWDWH[WHQVLRQWRREWDLQWKHFXUUHQWSRVWDJHDQGKDQGOLQJIHHV86,
GRHVQRWZDUUDQWDQGVSHFL¿FDOO\GLVFODLPVDQ\ZDUUDQW\ZKHWKHUH[SUHVVRULPSOLHGRI¿WQHVVIRU
a particular purpose, other than the warranty contained herein. No implied warranty on this product,
created by state law, shall extend beyond the term of this warranty unless such law otherwise
SURYLGHV86,VSHFL¿FDOO\GLVFODLPVDQ\OLDELOLW\DQGVKDOOQRWEHOLDEOHIRUDQ\FRQVHTXHQWLDORU
incidental loss or damage, including, but not limited to, damages to any equipment with which this
product is used. Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. No agent, representative,
dealer, or employee of the company has the authority to increase or alter the obligations or terms
RIWKLV:DUUDQW\7KLV:DUUDQW\JLYHV\RXVSHFL¿FOHJDOULJKWVDQG\RXPD\DOVRKDYHRWKHUULJKWV
which vary from state to state. This Warranty is only valid for merchandise purchased from outlets
LQWKH8QLWHG6WDWHVDQG&DQDGD7KLVZDUUDQW\H[SLUHVXSRQSURGXFWHQGRIVHUYLFHOLIHVLJQDOO
LITHIUM BATTERY LIMITED WARRANTY
7KH8OWUDOLIHEDWWHU\PRGHOV89/-DQG89/-3DUHZDUUDQWHGE\8OWUDOLIH&RUSRUDWLRQLQWKLV
alarm ONLY and are not warranted in any other device. Submit your warranty claim through the
8OWUDOLIHZHEVLWHZZZXOWUDOLIHFRUSFRPRUFDOO
11407 Cronhill Drive, Suite A
Owings Mills, Maryland 21117 USA
Visit Us on the Web! www.USI Electric.com
WHAT YOU SHOULD KNOW ABOUT CO
Carbon monoxide (CO) is an insidious poison. It is a colorless, odorless, tasteless gas. It is a
cumulative poison. Even low levels of CO have been shown to cause brain and other vital organ
damage in unborn infants with no effect on the mother.
The following symptoms are related to carbon monoxide poisoning and should be discussed with
ALL members of the household:
MILD EXPOSURE
6OLJKWKHDGDFKHQDXVHDYRPLWLQJIDWLJXHRIWHQGHVFULEHGDV³ÀXOLNH´V\PSWRPV
MEDIUM EXPOSURE
Severe throbbing headache, drowsiness, confusion, fast heart rate.
EXTREME EXPOSURE
Unconsciousness, convulsions, cardiorespiratory failure, death.
Many cases of reported carbon monoxide poisoning indicate that victims are aware they are not
well, but they become so disoriented that they are unable to save themselves by either exiting the
EXLOGLQJRUFDOOLQJIRUDVVLVWDQFH<RXQJFKLOGUHQDQGKRXVHKROGSHWVPD\EHWKH¿UVWDIIHFWHG
Your combination alarm is designed to detect the toxic CO fumes that result from incomplete
FRPEXVWLRQVXFKDVWKRVHHPLWWHGIURPDSSOLDQFHVIXUQDFHV¿UHSODFHVDQGDXWRH[KDXVW
What Levels of CO Cause an Alarm?
8QGHUZULWHUV/DERUDWRULHV,QF8/GH¿QHVWKUHHVSHFL¿FDODUPSRLQWVE\ZKLFKDOOUHVLGHQWLDO&2
alarms must alarm. They are measured in parts per million (ppm) of CO over time (in minutes).
UL2034 Required Alarm Points:
•If the alarm is exposed to 400 ppm of CO, it must alarm between 4 and 15 minutes.
•If the alarm is exposed to 150 ppm of CO, it must alarm between 10 and 50 minutes.
•If the alarm is exposed to 70 ppm of CO, it must alarm between 60 and 240 minutes.
Page 2
This product is intended for use in ordinary indoor locations of family living units. It is not designed
to measure compliance with Occupational Safety and Health Administration (OSHA) commercial or
industrial standards. Individuals with medical problems may consider using warning devices which
provide audible and visual warnings for carbon monoxide concentrations under 30 ppm.
IMPORTANT CONSIDERATIONS
YOUR COMBINATION CO AND NATURAL GAS ALARM HAS BEEN DESIGNED WITH A
PRODUCT END-OF-SERVICE LIFE SIGNAL WHICH WILL SOUND AFTER APPROXIMATELY
7 YEARS OF OPERATION FROM INITIAL POWER UP.
NOTE: MANUFACTURER RECOMMENDS REPLACEMENT OF THIS ALARM 7 YEARS AFTER
DATE OF INSTALLATION.
WHAT YOU SHOULD KNOW ABOUT NATURAL GAS
Natural gas is a fossil fuel which consists primarily of methane. This common energy source is
often used for cooking, home heating and water heating. Natural gas is typically supplied through
DPDLQXWLOLW\OLQHFRQQHFWHGWR\RXUKRPH,WLVDKLJKO\ÀDPPDEOHFKHPLFDOFRPSRXQG$OWKRXJK
it happens rarely, a natural gas leak can sometimes occur inside the home. This can be dangerous
EHFDXVHLWLQFUHDVHVWKHULVNRIH[SORVLRQDQG¿UH
Natural gas is odorless and colorless. When Mercaptan is added to natural gas as an odorant, it
can then be detected by smell. Although it can vary greatly, the typical level for detection of the gas
by smell is 25% of the lower explosion limit (LEL). People who have a diminished sense of smell
may not be able to rely on this safety mechanism. Therefore, installation of this alarm can be an
important tool to help protect you and your family. This alarm is calibrated to sound before 20%
LEL Therefore, it is possible that you may smell gas before the alarm is activated. If you are
not sure which gas your home uses, contact your utility company.
Natural gas (methane) is typically supplied through a main utility line connected to your home.
(DUO\ ZDUQLQJ LV EHVW DFKLHYHG E\ WKH LQVWDOODWLRQ RI DODUPV RQ DOO ÀRRUV DQG DUHDV RI WKH
household.
WHERE THIS CO AND NATURAL GAS ALARM SHOULD BE INSTALLED
•Install an alarm inside each bedroom where the occupant closes the door while sleeping.
BASIC SAFETY INFORMATION
•This combination Carbon Monoxide and Natural Gas alarm has separate alarms. This alarm is
not designed to detect smoke, heat or any other gas. Carbon monoxide and natural gas may
be present in other areas. The CO and Natural Gas Alarm will only indicate the presence of CO
or natural gas which reaches the sensor.
•Do not paint the alarm. Paint may clog the openings to the sensing chambers and prevent the
unit from operating properly.
•Do not stand too close to the unit when the alarm is sounding. It is loud to wake you in an
emergency. Exposure to the horn at close range may harm your hearing.
Make sure the alarm is not receiving excessively noisy power. Examples of noisy power
could be major appliances on the same circuit, power from a generator or solar power, light
GLPPHURQWKHVDPHFLUFXLWRUPRXQWHGQHDUÀXRUHVFHQWOLJKWLQJ([FHVVLYHO\QRLV\SRZHU
may cause damage to your alarm.
7KLVDODUPFDQQRWEHRSHUDWHGIURPSRZHUGHULYHGIURPDVTXDUHZDYHPRGL¿HGVTXDUHZDYHRU
PRGL¿HGVLQHZDYHLQYHUWHU7KHVHW\SHVRILQYHUWHUVDUHVRPHWLPHVXVHGWRVXSSO\SRZHULQRII
grid installations, such as solar or wind derived power sources. These power sources may produce
high peak voltages which will damage the alarm.
Do not install this alarm into an electrical circuit controlled by a dimmer or switch or ground
fault circuit interrupter.
•$QDODUP VKRXOG EHLQVWDOOHG LQ DQ\ IDPLO\OLYLQJ XQLW FRQWDLQLQJD IXHOEXUQLQJ DSSOLDQFH RU
¿UHSODFHRUKDYLQJDQDWWDFKHGJDUDJH
•An alarm should be centrally located outside of each separate sleeping area in the immediate
vicinity of the bedrooms. Where bedrooms are separated and audibility of the alarm to occupants
within the bedroom area could be seriously impaired, more than one alarm could be needed.
/RFDWHWKH¿UVWFRPELQDWLRQDODUPLQWKHLPPHGLDWHDUHDRIWKHEHGURRPV7U\WRSURWHFWWKH
escape route as the bedrooms are usually farthest from an exit. If more than one sleeping area
exists, locate additional combination alarms in each sleeping area. If a hall is more than 40 feet
(12 meters) long, install a combination alarm at each end.
/RFDWHDWOHDVWRQHFRPELQDWLRQ&2DQG*DVDODUPRQHYHU\ÀRRUOHYHO
In general, install combination CO and Gas Alarms:
•WHERE YOU CAN HEAR THE ALARM FROM ALL SLEEPING AREAS.
•In or near bedrooms and living areas or wherever you suspect a natural gas or CO exposure is
likely.
•On each level of a multilevel home.
IMPORTANT!
Installation in an improper location can affect the sensitive electronic components in this alarm.
Please review WHERE THIS ALARM SHOULD NOT BE INSTALLED (see Page 4).
1RWVXLWDEOHIRULQVWDOODWLRQLQKD]DUGRXVORFDWLRQVDVGH¿QHGLQWKH1DWLRQDO(OHFWULFDO&RGH7KLV
alarm will detect natural gas primarily and carbon monoxide secondarily. Natural gas events will
DOZD\VWDNHSUHFHGHQFHRYHUFDUERQPRQR[LGHHYHQWV7KHZRUG³JDV´ZLOOEHXVHGWRVSHFL¿FDOO\
refer to natural gas.
When on AC power, this alarm is designed to act as a continuous monitor. It is not designed for use
DVDVKRUWWHUPWHVWLQJGHYLFHWRSHUIRUPDTXLFNFKHFNIRUWKHSUHVHQFHRI&2RUJDV
Page 3
RECOMMENDED PLACEMENT:
WHAT YOU SHOULD KNOW ABOUT CO
Carbon monoxide (CO) is an insidious poison. It is a colorless, odorless, tasteless gas. It is a
cumulative poison. Even low levels of CO have been shown to cause brain and other vital organ
damage in unborn infants with no effect on the mother.
The following symptoms are related to carbon monoxide poisoning and should be discussed with
ALL members of the household:
MILD EXPOSURE
6OLJKWKHDGDFKHQDXVHDYRPLWLQJIDWLJXHRIWHQGHVFULEHGDV³ÀXOLNH´V\PSWRPV
MEDIUM EXPOSURE
Severe throbbing headache, drowsiness, confusion, fast heart rate.
EXTREME EXPOSURE
Unconsciousness, convulsions, cardiorespiratory failure, death.
Many cases of reported carbon monoxide poisoning indicate that victims are aware they are not
well, but they become so disoriented that they are unable to save themselves by either exiting the
EXLOGLQJRUFDOOLQJIRUDVVLVWDQFH<RXQJFKLOGUHQDQGKRXVHKROGSHWVPD\EHWKH¿UVWDIIHFWHG
Your combination alarm is designed to detect the toxic CO fumes that result from incomplete
FRPEXVWLRQVXFKDVWKRVHHPLWWHGIURPDSSOLDQFHVIXUQDFHV¿UHSODFHVDQGDXWRH[KDXVW
What Levels of CO Cause an Alarm?
8QGHUZULWHUV/DERUDWRULHV,QF8/GH¿QHVWKUHHVSHFL¿FDODUPSRLQWVE\ZKLFKDOOUHVLGHQWLDO&2
alarms must alarm. They are measured in parts per million (ppm) of CO over time (in minutes).
UL2034 Required Alarm Points:
•If the alarm is exposed to 400 ppm of CO, it must alarm between 4 and 15 minutes.
•If the alarm is exposed to 150 ppm of CO, it must alarm between 10 and 50 minutes.
•If the alarm is exposed to 70 ppm of CO, it must alarm between 60 and 240 minutes.
Page 2
This product is intended for use in ordinary indoor locations of family living units. It is not designed
to measure compliance with Occupational Safety and Health Administration (OSHA) commercial or
industrial standards. Individuals with medical problems may consider using warning devices which
provide audible and visual warnings for carbon monoxide concentrations under 30 ppm.
IMPORTANT CONSIDERATIONS
YOUR COMBINATION CO AND NATURAL GAS ALARM HAS BEEN DESIGNED WITH A
PRODUCT END-OF-SERVICE LIFE SIGNAL WHICH WILL SOUND AFTER APPROXIMATELY
7 YEARS OF OPERATION FROM INITIAL POWER UP.
NOTE: MANUFACTURER RECOMMENDS REPLACEMENT OF THIS ALARM 7 YEARS AFTER
DATE OF INSTALLATION.
WHAT YOU SHOULD KNOW ABOUT NATURAL GAS
Natural gas is a fossil fuel which consists primarily of methane. This common energy source is
often used for cooking, home heating and water heating. Natural gas is typically supplied through
DPDLQXWLOLW\OLQHFRQQHFWHGWR\RXUKRPH,WLVDKLJKO\ÀDPPDEOHFKHPLFDOFRPSRXQG$OWKRXJK
it happens rarely, a natural gas leak can sometimes occur inside the home. This can be dangerous
EHFDXVHLWLQFUHDVHVWKHULVNRIH[SORVLRQDQG¿UH
Natural gas is odorless and colorless. When Mercaptan is added to natural gas as an odorant, it
can then be detected by smell. Although it can vary greatly, the typical level for detection of the gas
by smell is 25% of the lower explosion limit (LEL). People who have a diminished sense of smell
may not be able to rely on this safety mechanism. Therefore, installation of this alarm can be an
important tool to help protect you and your family. This alarm is calibrated to sound before 20%
LEL Therefore, it is possible that you may smell gas before the alarm is activated. If you are
not sure which gas your home uses, contact your utility company.
Natural gas (methane) is typically supplied through a main utility line connected to your home.
(DUO\ ZDUQLQJ LV EHVW DFKLHYHG E\ WKH LQVWDOODWLRQ RI DODUPV RQ DOO ÀRRUV DQG DUHDV RI WKH
household.
WHERE THIS CO AND NATURAL GAS ALARM SHOULD BE INSTALLED
•Install an alarm inside each bedroom where the occupant closes the door while sleeping.
BASIC SAFETY INFORMATION
•This combination Carbon Monoxide and Natural Gas alarm has separate alarms. This alarm is
not designed to detect smoke, heat or any other gas. Carbon monoxide and natural gas may
be present in other areas. The CO and Natural Gas Alarm will only indicate the presence of CO
or natural gas which reaches the sensor.
•Do not paint the alarm. Paint may clog the openings to the sensing chambers and prevent the
unit from operating properly.
•Do not stand too close to the unit when the alarm is sounding. It is loud to wake you in an
emergency. Exposure to the horn at close range may harm your hearing.
Make sure the alarm is not receiving excessively noisy power. Examples of noisy power
could be major appliances on the same circuit, power from a generator or solar power, light
GLPPHURQWKHVDPHFLUFXLWRUPRXQWHGQHDUÀXRUHVFHQWOLJKWLQJ([FHVVLYHO\QRLV\SRZHU
may cause damage to your alarm.
7KLVDODUPFDQQRWEHRSHUDWHGIURPSRZHUGHULYHGIURPDVTXDUHZDYHPRGL¿HGVTXDUHZDYHRU
PRGL¿HGVLQHZDYHLQYHUWHU7KHVHW\SHVRILQYHUWHUVDUHVRPHWLPHVXVHGWRVXSSO\SRZHULQRII
grid installations, such as solar or wind derived power sources. These power sources may produce
high peak voltages which will damage the alarm.
Do not install this alarm into an electrical circuit controlled by a dimmer or switch or ground
fault circuit interrupter.
•$QDODUP VKRXOG EHLQVWDOOHG LQ DQ\ IDPLO\OLYLQJ XQLW FRQWDLQLQJD IXHOEXUQLQJ DSSOLDQFH RU
¿UHSODFHRUKDYLQJDQDWWDFKHGJDUDJH
•An alarm should be centrally located outside of each separate sleeping area in the immediate
vicinity of the bedrooms. Where bedrooms are separated and audibility of the alarm to occupants
within the bedroom area could be seriously impaired, more than one alarm could be needed.
/RFDWHWKH¿UVWFRPELQDWLRQDODUPLQWKHLPPHGLDWHDUHDRIWKHEHGURRPV7U\WRSURWHFWWKH
escape route as the bedrooms are usually farthest from an exit. If more than one sleeping area
exists, locate additional combination alarms in each sleeping area. If a hall is more than 40 feet
(12 meters) long, install a combination alarm at each end.
/RFDWHDWOHDVWRQHFRPELQDWLRQ&2DQG*DVDODUPRQHYHU\ÀRRUOHYHO
In general, install combination CO and Gas Alarms:
•WHERE YOU CAN HEAR THE ALARM FROM ALL SLEEPING AREAS.
•In or near bedrooms and living areas or wherever you suspect a natural gas or CO exposure is
likely.
•On each level of a multilevel home.
IMPORTANT!
Installation in an improper location can affect the sensitive electronic components in this alarm.
Please review WHERE THIS ALARM SHOULD NOT BE INSTALLED (see Page 4).
1RWVXLWDEOHIRULQVWDOODWLRQLQKD]DUGRXVORFDWLRQVDVGH¿QHGLQWKH1DWLRQDO(OHFWULFDO&RGH7KLV
alarm will detect natural gas primarily and carbon monoxide secondarily. Natural gas events will
DOZD\VWDNHSUHFHGHQFHRYHUFDUERQPRQR[LGHHYHQWV7KHZRUG³JDV´ZLOOEHXVHGWRVSHFL¿FDOO\
refer to natural gas.
When on AC power, this alarm is designed to act as a continuous monitor. It is not designed for use
DVDVKRUWWHUPWHVWLQJGHYLFHWRSHUIRUPDTXLFNFKHFNIRUWKHSUHVHQFHRI&2RUJDV
Page 3
RECOMMENDED PLACEMENT:
Page 4
NOTE: For any location, make sure no door or other obstruction could prevent the carbon monoxide
or gas from reaching the alarm.
WHERE THIS ALARM SHOULD NOT BE INSTALLED
To avoid causing damage to the unit, to provide optimum protection, and to prevent
unnecessary alarms. Do NOT locate this alarm:
•,QJDUDJHVNLWFKHQVFUDZOVSDFHVDQGXQ¿QLVKHGDWWLFV$YRLGH[WUHPHO\GXVW\GLUW\RUJUHDV\
areas. Installation in these areas could lead to nuisance alarms, may expose the sensor to
substances which could damage or contaminate it, or the alarm may not be heard by people in
other areas of the home, especially if they are sleeping.
•In the garage, vehicle exhaust can contain some carbon monoxide. These levels are higher when
WKHHQJLQHLV¿UVWVWDUWHG:LWKLQKRXUVRIVWDUWLQJDYHKLFOHDQGEDFNLQJLWRXWRIWKHJDUDJHWKH
levels present over time can activate the alarm and become a nuisance.
•In the kitchen, some gas appliances can emit a short burst of CO or gas upon startup. This is
normal. If your CO and Natural Gas Alarm is installed too close to these appliances, it may alarm
often and become a nuisance.
•Keep alarms at least 20 feet (6m) from the sources or combustion particles (stove, furnace,
water heater, space heater), if possible. In areas where a 20 foot (6m) distance is not possible
(in modular, mobile or smaller homes for example), it is recommended the alarm be placed as far
IURPWKHVHIXHOEXUQLQJVRXUFHVDVSRVVLEOH7KHSODFHPHQWUHFRPPHQGDWLRQVDUHLQWHQGHGWR
NHHSWKHVHDODUPVDWDUHDVRQDEOHGLVWDQFHIURPDIXHOEXUQLQJVRXUFHDQGUHGXFH³XQZDQWHG´
DODUPV8QZDQWHGDODUPVFDQRFFXULIDQDODUPLVSODFHGGLUHFWO\QH[WWRDIXHOEXUQLQJVRXUFH
Ventilate these areas as much as possible. If you must install the alarm near a cooking or
heating appliance, install at least 5 feet (1.5m) from appliance.
•/HVVWKDQLQFKHVPPDZD\IURPÀXRUHVFHQWOLJKWV(OHFWULFDOQRLVHFDQLQWHUIHUHZLWK
the sensor.
•In extremely humid areas. This alarm should be at least 10 feet (3m) from a bath or shower,
VDXQD KXPLGL¿HU YDSRUL]HU GLVKZDVKHU ODXQGU\ URRP XWLOLW\ URRP RU RWKHU VRXUFH RI KLJK
humidity.
•In very cold or very hot environments or in unheated buildings or outdoor rooms where the
temperature can go below or above the operating range of the alarm. Temperature limits for
proper operation are 40oto 100oF (4.4oto 37.8oC).
•In turbulent air, such as near ceiling fans, heat vents, air conditioners, fresh air returns or open
windows. Blowing air may prevent CO or natural gas from reaching the sensors.
•Good ventilation is recommended when household cleaning supplies or similar contaminants
are used.
•([FHVVLYHVSLOODJHRUUHYHUVHYHQWLQJRIIXHOEXUQLQJDSSOLDQFHVFDXVHGE\RXWGRRUDPELHQW
conditions, such as:
Wind direction and/or velocity, including high gusts of wind. Heavy air in the vent pipes
(cold/humid air with extended periods between cycles).
Negative pressure differential resulting from the use of exhaust fans.
6LPXOWDQHRXV RSHUDWLRQ RI VHYHUDO IXHOEXUQLQJ DSSOLDQFHV FRPSHWLQJ IRU OLPLWHG LQWHUQDO
air.
Vent pipe connections vibrating loose from clothes dryers, furnaces or water heaters.
Obstructions in or unconventional vent pipe designs which can amplify the above situations.
BASIC SAFETY INFORMATION
•This combination Carbon Monoxide and Natural Gas alarm has separate alarms. This alarm is
not designed to detect smoke, heat or any other gas. Carbon monoxide and natural gas may
be present in other areas. The CO and Natural Gas Alarm will only indicate the presence of CO
or natural gas which reaches the sensor.
•Do not paint the alarm. Paint may clog the openings to the sensing chambers and prevent the
unit from operating properly.
•Do not stand too close to the unit when the alarm is sounding. It is loud to wake you in an
emergency. Exposure to the horn at close range may harm your hearing.
Make sure the alarm is not receiving excessively noisy power. Examples of noisy power
could be major appliances on the same circuit, power from a generator or solar power, light
GLPPHURQWKHVDPHFLUFXLWRUPRXQWHGQHDUÀXRUHVFHQWOLJKWLQJ([FHVVLYHO\QRLV\SRZHU
may cause damage to your alarm.
7KLVDODUPFDQQRWEHRSHUDWHGIURPSRZHUGHULYHGIURPDVTXDUHZDYHPRGL¿HGVTXDUHZDYHRU
PRGL¿HGVLQHZDYHLQYHUWHU7KHVHW\SHVRILQYHUWHUVDUHVRPHWLPHVXVHGWRVXSSO\SRZHULQRII
grid installations, such as solar or wind derived power sources. These power sources may produce
high peak voltages which will damage the alarm.
Do not install this alarm into an electrical circuit controlled by a dimmer or switch or ground
fault circuit interrupter.
•$QDODUP VKRXOG EHLQVWDOOHG LQ DQ\ IDPLO\OLYLQJ XQLW FRQWDLQLQJD IXHOEXUQLQJ DSSOLDQFH RU
¿UHSODFHRUKDYLQJDQDWWDFKHGJDUDJH
•An alarm should be centrally located outside of each separate sleeping area in the immediate
vicinity of the bedrooms. Where bedrooms are separated and audibility of the alarm to occupants
within the bedroom area could be seriously impaired, more than one alarm could be needed.
/RFDWHWKH¿UVWFRPELQDWLRQDODUPLQWKHLPPHGLDWHDUHDRIWKHEHGURRPV7U\WRSURWHFWWKH
escape route as the bedrooms are usually farthest from an exit. If more than one sleeping area
exists, locate additional combination alarms in each sleeping area. If a hall is more than 40 feet
(12 meters) long, install a combination alarm at each end.
/RFDWHDWOHDVWRQHFRPELQDWLRQ&2DQG*DVDODUPRQHYHU\ÀRRUOHYHO
In general, install combination CO and Gas Alarms:
•WHERE YOU CAN HEAR THE ALARM FROM ALL SLEEPING AREAS.
•In or near bedrooms and living areas or wherever you suspect a natural gas or CO exposure is
likely.
•On each level of a multilevel home.
IMPORTANT!
Installation in an improper location can affect the sensitive electronic components in this alarm.
Please review WHERE THIS ALARM SHOULD NOT BE INSTALLED (see Page 4).
1RWVXLWDEOHIRULQVWDOODWLRQLQKD]DUGRXVORFDWLRQVDVGH¿QHGLQWKH1DWLRQDO(OHFWULFDO&RGH7KLV
alarm will detect natural gas primarily and carbon monoxide secondarily. Natural gas events will
DOZD\VWDNHSUHFHGHQFHRYHUFDUERQPRQR[LGHHYHQWV7KHZRUG³JDV´ZLOOEHXVHGWRVSHFL¿FDOO\
refer to natural gas.
When on AC power, this alarm is designed to act as a continuous monitor. It is not designed for use
DVDVKRUWWHUPWHVWLQJGHYLFHWRSHUIRUPDTXLFNFKHFNIRUWKHSUHVHQFHRI&2RUJDV
Page 3
RECOMMENDED PLACEMENT:
Page 4
NOTE: For any location, make sure no door or other obstruction could prevent the carbon monoxide
or gas from reaching the alarm.
WHERE THIS ALARM SHOULD NOT BE INSTALLED
To avoid causing damage to the unit, to provide optimum protection, and to prevent
unnecessary alarms. Do NOT locate this alarm:
•,QJDUDJHVNLWFKHQVFUDZOVSDFHVDQGXQ¿QLVKHGDWWLFV$YRLGH[WUHPHO\GXVW\GLUW\RUJUHDV\
areas. Installation in these areas could lead to nuisance alarms, may expose the sensor to
substances which could damage or contaminate it, or the alarm may not be heard by people in
other areas of the home, especially if they are sleeping.
•In the garage, vehicle exhaust can contain some carbon monoxide. These levels are higher when
WKHHQJLQHLV¿UVWVWDUWHG:LWKLQKRXUVRIVWDUWLQJDYHKLFOHDQGEDFNLQJLWRXWRIWKHJDUDJHWKH
levels present over time can activate the alarm and become a nuisance.
•In the kitchen, some gas appliances can emit a short burst of CO or gas upon startup. This is
normal. If your CO and Natural Gas Alarm is installed too close to these appliances, it may alarm
often and become a nuisance.
•Keep alarms at least 20 feet (6m) from the sources or combustion particles (stove, furnace,
water heater, space heater), if possible. In areas where a 20 foot (6m) distance is not possible
(in modular, mobile or smaller homes for example), it is recommended the alarm be placed as far
IURPWKHVHIXHOEXUQLQJVRXUFHVDVSRVVLEOH7KHSODFHPHQWUHFRPPHQGDWLRQVDUHLQWHQGHGWR
NHHSWKHVHDODUPVDWDUHDVRQDEOHGLVWDQFHIURPDIXHOEXUQLQJVRXUFHDQGUHGXFH³XQZDQWHG´
DODUPV8QZDQWHGDODUPVFDQRFFXULIDQDODUPLVSODFHGGLUHFWO\QH[WWRDIXHOEXUQLQJVRXUFH
Ventilate these areas as much as possible. If you must install the alarm near a cooking or
heating appliance, install at least 5 feet (1.5m) from appliance.
•/HVVWKDQLQFKHVPPDZD\IURPÀXRUHVFHQWOLJKWV(OHFWULFDOQRLVHFDQLQWHUIHUHZLWK
the sensor.
•In extremely humid areas. This alarm should be at least 10 feet (3m) from a bath or shower,
VDXQD KXPLGL¿HU YDSRUL]HU GLVKZDVKHU ODXQGU\ URRP XWLOLW\ URRP RU RWKHU VRXUFH RI KLJK
humidity.
•In very cold or very hot environments or in unheated buildings or outdoor rooms where the
temperature can go below or above the operating range of the alarm. Temperature limits for
proper operation are 40oto 100oF (4.4oto 37.8oC).
•In turbulent air, such as near ceiling fans, heat vents, air conditioners, fresh air returns or open
windows. Blowing air may prevent CO or natural gas from reaching the sensors.
•Good ventilation is recommended when household cleaning supplies or similar contaminants
are used.
•([FHVVLYHVSLOODJHRUUHYHUVHYHQWLQJRIIXHOEXUQLQJDSSOLDQFHVFDXVHGE\RXWGRRUDPELHQW
conditions, such as:
Wind direction and/or velocity, including high gusts of wind. Heavy air in the vent pipes
(cold/humid air with extended periods between cycles).
Negative pressure differential resulting from the use of exhaust fans.
6LPXOWDQHRXV RSHUDWLRQ RI VHYHUDO IXHOEXUQLQJ DSSOLDQFHV FRPSHWLQJ IRU OLPLWHG LQWHUQDO
air.
Vent pipe connections vibrating loose from clothes dryers, furnaces or water heaters.
Obstructions in or unconventional vent pipe designs which can amplify the above situations.
Page 5
THIS ALARM WILL NOT WORK WITHOUT 120 VAC POWER AND A GOOD
BATTERY PROPERLY INSTALLED. THE ALARM SHOULD BE TESTED WHEN
INSTALLED AND THEN TESTED WEEKLY AFTER THAT.
INSTALLATION INSTRUCTIONS: CAUTION!! READ CAREFULLY.
Installation of this alarm must conform to the electrical codes in your area; Article 760 of
the National Electrical Code, NFPA 72, 101; SBC (SBCCI); UBC (ICBO); NBC (BOCA): OTFDC
(CABO), and any other local or building codes that may apply. Wiring and installation must
be performed by a licensed electrician. Failure to follow these guidelines may result in
injury or property damage.
This alarm must be powered by a 24-hour, 120V AC 60Hz circuit. Be sure the circuit cannot
be turned off by a switch, dimmer or ground fault circuit interrupter. Failure to connect this
alarm to a 24-hour circuit may prevent it from providing constant protection.
IMPORTANT: Do not subject this alarm to megger, high voltage or high-pot tests. Remove
the alarm(s) before high-potting tests occur on the circuit or system. (Ref. Section 550-17,
National Electrical Code, 2002 Edition).
ELECTRICAL SHOCK HAZARD
Turn off power to the area where you will install this alarm at the circuit breaker or fuse box
before beginning installation. Failure to turn off the power before installation may result in
serious electrical shock, injury or death.
CAUTION: THIS CO AND NATURAL GAS ALARM IS SEALED. THE COVER IS
NOT REMOVABLE!
•A mounting bracket is provided on the back of the alarm.
•The alarm deactivation key will not be used for this model.
•Remove the mounting bracket from the back of the alarm by holding the mounting bracket and
WZLVWLQJWKHDODUPLQWKHGLUHFWLRQLQGLFDWHGE\WKH³7:,67725(029(´DUURZRQWKHVLGHRI
the alarm base.
OPTIONAL TAMPER RESISTANT FEATURES: There are two separate tamper resistant locking
features provided for this model. Activating one or both of these features deters someone from
removing the alarm from the mounting bracket or removing the battery from the alarm. The
breakaway locking pins are clearly marked and molded into the mounting bracket. Refer to the
diagram on the next page.
TO ACTIVATE THE LOCKING FEATURES: Do not activate the locking features until you have
activated the battery, mounted the alarm to the bracket and tested the alarm. Refer to OPERATION,
TESTING & MAINTENANCE instructions on Page 6.
1. Detach the breakaway alarm locking pin from the mounting bracket.
TO DEACTIVATE THE LOCKING FEATURES: To remove the alarm for cleaning or servicing or to
UHSODFHWKHEDWWHU\\RXPXVW¿UVWUHPRYHWKHDSSURSULDWHORFNLQJSLQLILWKDVEHHQLQVWDOOHG
1. Turn off AC power to the circuit.
2. Use long nose pliers to pull the locking pin out of the hole.
3. It is now possible to remove the alarm or replace the battery.
WIRING INSTRUCTIONS:
D 7KH DSSURSULDWH SRZHU VXSSO\ LV 9ROW VLQJOH SKDVH SRZHU VXSSOLHG IURP D QRQ
switchable circuit NOT protected by a ground fault circuit interrupter.
2. Insert the pin into the hole for the feature you are activating. Refer to the diagram below for
correct placement.
INSERT ALARM LOCKING
PIN HERE
INSERT BATTERY
LOCKING PIN HERE
ALARM/BRACKET
LOCKING PIN
BATTERY DRAWER LOCKING PIN
Page 4
NOTE: For any location, make sure no door or other obstruction could prevent the carbon monoxide
or gas from reaching the alarm.
WHERE THIS ALARM SHOULD NOT BE INSTALLED
To avoid causing damage to the unit, to provide optimum protection, and to prevent
unnecessary alarms. Do NOT locate this alarm:
•,QJDUDJHVNLWFKHQVFUDZOVSDFHVDQGXQ¿QLVKHGDWWLFV$YRLGH[WUHPHO\GXVW\GLUW\RUJUHDV\
areas. Installation in these areas could lead to nuisance alarms, may expose the sensor to
substances which could damage or contaminate it, or the alarm may not be heard by people in
other areas of the home, especially if they are sleeping.
•In the garage, vehicle exhaust can contain some carbon monoxide. These levels are higher when
WKHHQJLQHLV¿UVWVWDUWHG:LWKLQKRXUVRIVWDUWLQJDYHKLFOHDQGEDFNLQJLWRXWRIWKHJDUDJHWKH
levels present over time can activate the alarm and become a nuisance.
•In the kitchen, some gas appliances can emit a short burst of CO or gas upon startup. This is
normal. If your CO and Natural Gas Alarm is installed too close to these appliances, it may alarm
often and become a nuisance.
•Keep alarms at least 20 feet (6m) from the sources or combustion particles (stove, furnace,
water heater, space heater), if possible. In areas where a 20 foot (6m) distance is not possible
(in modular, mobile or smaller homes for example), it is recommended the alarm be placed as far
IURPWKHVHIXHOEXUQLQJVRXUFHVDVSRVVLEOH7KHSODFHPHQWUHFRPPHQGDWLRQVDUHLQWHQGHGWR
NHHSWKHVHDODUPVDWDUHDVRQDEOHGLVWDQFHIURPDIXHOEXUQLQJVRXUFHDQGUHGXFH³XQZDQWHG´
DODUPV8QZDQWHGDODUPVFDQRFFXULIDQDODUPLVSODFHGGLUHFWO\QH[WWRDIXHOEXUQLQJVRXUFH
Ventilate these areas as much as possible. If you must install the alarm near a cooking or
heating appliance, install at least 5 feet (1.5m) from appliance.
•/HVVWKDQLQFKHVPPDZD\IURPÀXRUHVFHQWOLJKWV(OHFWULFDOQRLVHFDQLQWHUIHUHZLWK
the sensor.
•In extremely humid areas. This alarm should be at least 10 feet (3m) from a bath or shower,
VDXQD KXPLGL¿HU YDSRUL]HU GLVKZDVKHU ODXQGU\ URRP XWLOLW\ URRP RU RWKHU VRXUFH RI KLJK
humidity.
•In very cold or very hot environments or in unheated buildings or outdoor rooms where the
temperature can go below or above the operating range of the alarm. Temperature limits for
proper operation are 40oto 100oF (4.4oto 37.8oC).
•In turbulent air, such as near ceiling fans, heat vents, air conditioners, fresh air returns or open
windows. Blowing air may prevent CO or natural gas from reaching the sensors.
•Good ventilation is recommended when household cleaning supplies or similar contaminants
are used.
•([FHVVLYHVSLOODJHRUUHYHUVHYHQWLQJRIIXHOEXUQLQJDSSOLDQFHVFDXVHGE\RXWGRRUDPELHQW
conditions, such as:
Wind direction and/or velocity, including high gusts of wind. Heavy air in the vent pipes
(cold/humid air with extended periods between cycles).
Negative pressure differential resulting from the use of exhaust fans.
6LPXOWDQHRXV RSHUDWLRQ RI VHYHUDO IXHOEXUQLQJ DSSOLDQFHV FRPSHWLQJ IRU OLPLWHG LQWHUQDO
air.
Vent pipe connections vibrating loose from clothes dryers, furnaces or water heaters.
Obstructions in or unconventional vent pipe designs which can amplify the above situations.
Page 5
THIS ALARM WILL NOT WORK WITHOUT 120 VAC POWER AND A GOOD
BATTERY PROPERLY INSTALLED. THE ALARM SHOULD BE TESTED WHEN
INSTALLED AND THEN TESTED WEEKLY AFTER THAT.
INSTALLATION INSTRUCTIONS: CAUTION!! READ CAREFULLY.
Installation of this alarm must conform to the electrical codes in your area; Article 760 of
the National Electrical Code, NFPA 72, 101; SBC (SBCCI); UBC (ICBO); NBC (BOCA): OTFDC
(CABO), and any other local or building codes that may apply. Wiring and installation must
be performed by a licensed electrician. Failure to follow these guidelines may result in
injury or property damage.
This alarm must be powered by a 24-hour, 120V AC 60Hz circuit. Be sure the circuit cannot
be turned off by a switch, dimmer or ground fault circuit interrupter. Failure to connect this
alarm to a 24-hour circuit may prevent it from providing constant protection.
IMPORTANT: Do not subject this alarm to megger, high voltage or high-pot tests. Remove
the alarm(s) before high-potting tests occur on the circuit or system. (Ref. Section 550-17,
National Electrical Code, 2002 Edition).
ELECTRICAL SHOCK HAZARD
Turn off power to the area where you will install this alarm at the circuit breaker or fuse box
before beginning installation. Failure to turn off the power before installation may result in
serious electrical shock, injury or death.
CAUTION: THIS CO AND NATURAL GAS ALARM IS SEALED. THE COVER IS
NOT REMOVABLE!
•A mounting bracket is provided on the back of the alarm.
•The alarm deactivation key will not be used for this model.
•Remove the mounting bracket from the back of the alarm by holding the mounting bracket and
WZLVWLQJWKHDODUPLQWKHGLUHFWLRQLQGLFDWHGE\WKH³7:,67725(029(´DUURZRQWKHVLGHRI
the alarm base.
OPTIONAL TAMPER RESISTANT FEATURES: There are two separate tamper resistant locking
features provided for this model. Activating one or both of these features deters someone from
removing the alarm from the mounting bracket or removing the battery from the alarm. The
breakaway locking pins are clearly marked and molded into the mounting bracket. Refer to the
diagram on the next page.
TO ACTIVATE THE LOCKING FEATURES: Do not activate the locking features until you have
activated the battery, mounted the alarm to the bracket and tested the alarm. Refer to OPERATION,
TESTING & MAINTENANCE instructions on Page 6.
1. Detach the breakaway alarm locking pin from the mounting bracket.
TO DEACTIVATE THE LOCKING FEATURES: To remove the alarm for cleaning or servicing or to
UHSODFHWKHEDWWHU\\RXPXVW¿UVWUHPRYHWKHDSSURSULDWHORFNLQJSLQLILWKDVEHHQLQVWDOOHG
1. Turn off AC power to the circuit.
2. Use long nose pliers to pull the locking pin out of the hole.
3. It is now possible to remove the alarm or replace the battery.
WIRING INSTRUCTIONS:
D 7KH DSSURSULDWH SRZHU VXSSO\ LV 9ROW VLQJOH SKDVH SRZHU VXSSOLHG IURP D QRQ
switchable circuit NOT protected by a ground fault circuit interrupter.
2. Insert the pin into the hole for the feature you are activating. Refer to the diagram below for
correct placement.
INSERT ALARM LOCKING
PIN HERE
INSERT BATTERY
LOCKING PIN HERE
ALARM/BRACKET
LOCKING PIN
BATTERY DRAWER LOCKING PIN
DO NOT TAMPER WITH WIRES WHEN POWER IS ON!
For alarms that are used as single non-interconnected, stand-alone alarms, do not connect
the yellow wire to anything. Insulate this wire (tape it) in place to make certain the yellow
wire cannot contact any metal parts.
INTERCONNECTION & COMPATIBILITY: Interconnected alarms can provide earlier warning
than stand-alone alarms, especially if a hazard is present in a remote area of the dwelling.
When alarms are interconnected, all alarms will sound when the initiating alarm sounds,
providing more time to escape safely. This alarm may be interconnected with a total of not
more than 24 interconnected devices, i.e. as many as 11 other USI Electric or Universal
brand model smoke alarms or combination smoke and carbon monoxide (CO) alarms or
smoke and carbon monoxide/natural gas alarms; 6 other initiating alarms which may be
a combination of USI Electric or Universal brand CO alarms and heat alarms; and 6 other
non-initiating devices such as USI Electric brand relays.
This alarm can be interconnected with the following compatible alarms: MDSCN111, MICN109,
MCN108, SS-2895, USI-1103, USI-1204, USI-1208, USI-1209, USI-5204, USI-3204, USI-7795,
5304, MI106, MDS107, MP117, USI-2430, USI-960, MI106S, MIC1509S.
When any one of these interconnected models goes into alarm, it will trigger the corresponding
alarm within the interconnected system with respect to their sensing capabilities.
Interconnected CO alarms, or the CO alarm circuit of combination smoke, CO and natural gas
alarms, will only respond if a CO alarm event initiates the alarm. All other alarms remain silent.
Interconnected combination CO and natural gas alarms will only respond if a natural gas
event initiated the alarm. All other alarms remain silent. Natural gas detection is only present
in models MDSCN111, MICN109, MCN108; therefore, a natural gas alarm will NOT trigger the
alarm of non-natural gas sensing models within an interconnected system.
The following alarms can trigger Quick Find® Alarm Origination, but will not indicate
Alarm Origination on an interconnected system: USI-1103, USI-1204, USI-1208,
USI-1209, USI-1213, USI-5204, USI-3204, USI-2430, USI-7795.
The following alarms cannot be reset through an interconnected system because they do
not have Quick Find® Alarm Origination: USI-1103, USI-1204, USI-1208, USI-1209,
USI-5204, USI-3204, USI-2430, USI-7795.
Interconnected smoke alarms, heat alarms and relays will only respond if a smoke alarm
event or heat alarm event initiates the alarm. All CO and natural gas alarms remain silent.
NOTE: Alarms without battery backup will not respond during an AC power failure.
NOTE: The relay, model USI-960, will not respond if a CO or natural gas alarm event initiates
the alarm.
Page 6
b. Turn off AC power to the circuit before wiring the alarm.
c. There are three pigtail wires (black, white and yellow) coming from the AC QUICK
CONNECTOR. The proper wire connection is as follows:
WIRES FROM QUICK CONNECTORCONNECT TO
%/$&. ³+27´VLGHRI$&OLQH
:+,7( ³1(875$/´VLGHRI$&OLQH
YELLOW Interconnect wires of other alarms
Page 5
THIS ALARM WILL NOT WORK WITHOUT 120 VAC POWER AND A GOOD
BATTERY PROPERLY INSTALLED. THE ALARM SHOULD BE TESTED WHEN
INSTALLED AND THEN TESTED WEEKLY AFTER THAT.
INSTALLATION INSTRUCTIONS: CAUTION!! READ CAREFULLY.
Installation of this alarm must conform to the electrical codes in your area; Article 760 of
the National Electrical Code, NFPA 72, 101; SBC (SBCCI); UBC (ICBO); NBC (BOCA): OTFDC
(CABO), and any other local or building codes that may apply. Wiring and installation must
be performed by a licensed electrician. Failure to follow these guidelines may result in
injury or property damage.
This alarm must be powered by a 24-hour, 120V AC 60Hz circuit. Be sure the circuit cannot
be turned off by a switch, dimmer or ground fault circuit interrupter. Failure to connect this
alarm to a 24-hour circuit may prevent it from providing constant protection.
IMPORTANT: Do not subject this alarm to megger, high voltage or high-pot tests. Remove
the alarm(s) before high-potting tests occur on the circuit or system. (Ref. Section 550-17,
National Electrical Code, 2002 Edition).
ELECTRICAL SHOCK HAZARD
Turn off power to the area where you will install this alarm at the circuit breaker or fuse box
before beginning installation. Failure to turn off the power before installation may result in
serious electrical shock, injury or death.
CAUTION: THIS CO AND NATURAL GAS ALARM IS SEALED. THE COVER IS
NOT REMOVABLE!
•A mounting bracket is provided on the back of the alarm.
•The alarm deactivation key will not be used for this model.
•Remove the mounting bracket from the back of the alarm by holding the mounting bracket and
WZLVWLQJWKHDODUPLQWKHGLUHFWLRQLQGLFDWHGE\WKH³7:,67725(029(´DUURZRQWKHVLGHRI
the alarm base.
OPTIONAL TAMPER RESISTANT FEATURES: There are two separate tamper resistant locking
features provided for this model. Activating one or both of these features deters someone from
removing the alarm from the mounting bracket or removing the battery from the alarm. The
breakaway locking pins are clearly marked and molded into the mounting bracket. Refer to the
diagram on the next page.
TO ACTIVATE THE LOCKING FEATURES: Do not activate the locking features until you have
activated the battery, mounted the alarm to the bracket and tested the alarm. Refer to OPERATION,
TESTING & MAINTENANCE instructions on Page 6.
1. Detach the breakaway alarm locking pin from the mounting bracket.
TO DEACTIVATE THE LOCKING FEATURES: To remove the alarm for cleaning or servicing or to
UHSODFHWKHEDWWHU\\RXPXVW¿UVWUHPRYHWKHDSSURSULDWHORFNLQJSLQLILWKDVEHHQLQVWDOOHG
1. Turn off AC power to the circuit.
2. Use long nose pliers to pull the locking pin out of the hole.
3. It is now possible to remove the alarm or replace the battery.
WIRING INSTRUCTIONS:
D 7KH DSSURSULDWH SRZHU VXSSO\ LV 9ROW VLQJOH SKDVH SRZHU VXSSOLHG IURP D QRQ
switchable circuit NOT protected by a ground fault circuit interrupter.
2. Insert the pin into the hole for the feature you are activating. Refer to the diagram below for
correct placement.
INSERT ALARM LOCKING
PIN HERE
INSERT BATTERY
LOCKING PIN HERE
ALARM/BRACKET
LOCKING PIN
BATTERY DRAWER LOCKING PIN
DO NOT TAMPER WITH WIRES WHEN POWER IS ON!
For alarms that are used as single non-interconnected, stand-alone alarms, do not connect
the yellow wire to anything. Insulate this wire (tape it) in place to make certain the yellow
wire cannot contact any metal parts.
INTERCONNECTION & COMPATIBILITY: Interconnected alarms can provide earlier warning
than stand-alone alarms, especially if a hazard is present in a remote area of the dwelling.
When alarms are interconnected, all alarms will sound when the initiating alarm sounds,
providing more time to escape safely. This alarm may be interconnected with a total of not
more than 24 interconnected devices, i.e. as many as 11 other USI Electric or Universal
brand model smoke alarms or combination smoke and carbon monoxide (CO) alarms or
smoke and carbon monoxide/natural gas alarms; 6 other initiating alarms which may be
a combination of USI Electric or Universal brand CO alarms and heat alarms; and 6 other
non-initiating devices such as USI Electric brand relays.
This alarm can be interconnected with the following compatible alarms: MDSCN111, MICN109,
MCN108, SS-2895, USI-1103, USI-1204, USI-1208, USI-1209, USI-5204, USI-3204, USI-7795,
5304, MI106, MDS107, MP117, USI-2430, USI-960, MI106S, MIC1509S.
When any one of these interconnected models goes into alarm, it will trigger the corresponding
alarm within the interconnected system with respect to their sensing capabilities.
Interconnected CO alarms, or the CO alarm circuit of combination smoke, CO and natural gas
alarms, will only respond if a CO alarm event initiates the alarm. All other alarms remain silent.
Interconnected combination CO and natural gas alarms will only respond if a natural gas
event initiated the alarm. All other alarms remain silent. Natural gas detection is only present
in models MDSCN111, MICN109, MCN108; therefore, a natural gas alarm will NOT trigger the
alarm of non-natural gas sensing models within an interconnected system.
The following alarms can trigger Quick Find® Alarm Origination, but will not indicate
Alarm Origination on an interconnected system: USI-1103, USI-1204, USI-1208,
USI-1209, USI-1213, USI-5204, USI-3204, USI-2430, USI-7795.
The following alarms cannot be reset through an interconnected system because they do
not have Quick Find® Alarm Origination: USI-1103, USI-1204, USI-1208, USI-1209,
USI-5204, USI-3204, USI-2430, USI-7795.
Interconnected smoke alarms, heat alarms and relays will only respond if a smoke alarm
event or heat alarm event initiates the alarm. All CO and natural gas alarms remain silent.
NOTE: Alarms without battery backup will not respond during an AC power failure.
NOTE: The relay, model USI-960, will not respond if a CO or natural gas alarm event initiates
the alarm.
Page 6
b. Turn off AC power to the circuit before wiring the alarm.
c. There are three pigtail wires (black, white and yellow) coming from the AC QUICK
CONNECTOR. The proper wire connection is as follows:
WIRES FROM QUICK CONNECTORCONNECT TO
%/$&. ³+27´VLGHRI$&OLQH
:+,7( ³1(875$/´VLGHRI$&OLQH
YELLOW Interconnect wires of other alarms
The yellow wire is used only for interconnect (multiple station operations) USI Electric or
Universal model alarms. Connecting this yellow wire to any other circuits may result in
damage and alarm malfunction. All interconnect alarms must be powered from a single circuit.
If local codes do not specify, be sure the neutral wire is common to all alarms. The maximum
ZLUHUXQGLVWDQFHEHWZHHQWKH¿UVWDQGODVWDODUPGHYLFHLQDQLQWHUFRQQHFWHGV\VWHPLV
1,000 feet. NOTE: Use standard household wire, 18 gauge or larger, rated at least 300V, as
required by local codes. This wire is commonly available at most electrical supply and
hardware stores. The resistance of the interconnect wiring shall be a maximum of 10 Ohms.
The alarm wiring shall be in accordance with the provisions of Articles 210 and 300.3(B) of
WKH1DWLRQDO(OHFWULFDO&RGH$16,1)3$$FFRUGLQJWRWKH1)3$(GSDUDJUDSK
+RXVHKROG )LUH$ODUP 6\VWHPV $& 3ULPDU\ 3RZHU 6RXUFH ³$& SULPDU\ PDLQ
power shall be supplied either from a dedicated branch circuit or the un-switched portion
of a branch circuit also used for power and lighting.”
2. Attach the mounting bracket to the electrical junction box.
3. To activate 9 volt battery and alarm, hold the QUICK DRAW(R) battery drawer closed, pull and
UHPRYHWKH38//7$%&RQ¿UPWKDWWKHHQWLUH38//7$%KDVEHHQFRPSOHWHO\UHPRYHG'LVFDUG
38//7$%
4. Plug the AC QUICK CONNECTOR into the alarm base. Push and twist the alarm clockwise onto
the mounting bracket.
6HH ³237,21$/ 7$03(5 5(6,67$17 )($785(6´ DQG ³72$&7,9$7( 7+( /2&.,1*
)($785(6´LQVWUXFWLRQVRQ3DJH
6. Turn on AC power and check the LED’s for proper operation. The green LED should be on to
indicate AC power. The red LED blinks on once approx. every 40 seconds to indicate proper
operation.
Page 7
IMPORTANT!
7KHEDWWHU\EDFNXSLVGHVLJQHGWRSURYLGHVKRUWWHUPHPHUJHQF\SRZHUWRWKH&2DQG1DWXUDO*DV
Alarm. Actual backup time depends on the strength (freshness) of the battery. The battery backup
will not work unless a good battery is properly installed.
When the alarm utilizes battery backup power, the natural gas sensor will operate the alarm and will
sample less frequently to extend battery life. Natural gas could be present during this period between
samples without the alarm sounding, especially if there is a rapid buildup of natural gas.
127( ,W LV EHVW WR ³UHVHW´ WKH DODUPV EHIRUH LQLWLDO WHVW LV SHUIRUPHG 6HH 3DJH IRU 5HVHW
procedures.
120 VAC 60Hz
100mA Max.
OPERATION, TESTING & MAINTENANCE
OPERATION: The alarm is operating once the AC power is connected and turned on.
READY/ACTIVE CONDITION: The green LED is on and blinks off once approx. every 20 seconds
to indicate the alarm is properly functioning.
GREEN LED: The green LED is off and blinks on approx. every 40 seconds whenever AC power
is turned off.
CO ALARM: The alarm signal is 4 beeps, 5 second pause, repeat. The red LED blinks on in sync
with the cycle of 4 beeps.
GAS ALARM: The alarm signal is 1 beep, 2 second pause, repeat. The blue LED blinks on in
sync with the horn beep.
NUISANCE ALARM: If the horn signals and the red or blue LED’s blink on for no apparent reason
and no obvious hazard is present, please verify that the alarm is mounted in the correct location.
Reset the alarm as instructed in the Operational Summary.
CO ALARM LATCHING LED INDICATOR: The alarm had previously detected CO and had alarmed.
The red LED is off and blinks on approx. every 5 seconds until reset. Follow the reset instructions
to remove the latching LED.
DO NOT TAMPER WITH WIRES WHEN POWER IS ON!
For alarms that are used as single non-interconnected, stand-alone alarms, do not connect
the yellow wire to anything. Insulate this wire (tape it) in place to make certain the yellow
wire cannot contact any metal parts.
INTERCONNECTION & COMPATIBILITY: Interconnected alarms can provide earlier warning
than stand-alone alarms, especially if a hazard is present in a remote area of the dwelling.
When alarms are interconnected, all alarms will sound when the initiating alarm sounds,
providing more time to escape safely. This alarm may be interconnected with a total of not
more than 24 interconnected devices, i.e. as many as 11 other USI Electric or Universal
brand model smoke alarms or combination smoke and carbon monoxide (CO) alarms or
smoke and carbon monoxide/natural gas alarms; 6 other initiating alarms which may be
a combination of USI Electric or Universal brand CO alarms and heat alarms; and 6 other
non-initiating devices such as USI Electric brand relays.
This alarm can be interconnected with the following compatible alarms: MDSCN111, MICN109,
MCN108, SS-2895, USI-1103, USI-1204, USI-1208, USI-1209, USI-5204, USI-3204, USI-7795,
5304, MI106, MDS107, MP117, USI-2430, USI-960, MI106S, MIC1509S.
When any one of these interconnected models goes into alarm, it will trigger the corresponding
alarm within the interconnected system with respect to their sensing capabilities.
Interconnected CO alarms, or the CO alarm circuit of combination smoke, CO and natural gas
alarms, will only respond if a CO alarm event initiates the alarm. All other alarms remain silent.
Interconnected combination CO and natural gas alarms will only respond if a natural gas
event initiated the alarm. All other alarms remain silent. Natural gas detection is only present
in models MDSCN111, MICN109, MCN108; therefore, a natural gas alarm will NOT trigger the
alarm of non-natural gas sensing models within an interconnected system.
The following alarms can trigger Quick Find® Alarm Origination, but will not indicate
Alarm Origination on an interconnected system: USI-1103, USI-1204, USI-1208,
USI-1209, USI-1213, USI-5204, USI-3204, USI-2430, USI-7795.
The following alarms cannot be reset through an interconnected system because they do
not have Quick Find® Alarm Origination: USI-1103, USI-1204, USI-1208, USI-1209,
USI-5204, USI-3204, USI-2430, USI-7795.
Interconnected smoke alarms, heat alarms and relays will only respond if a smoke alarm
event or heat alarm event initiates the alarm. All CO and natural gas alarms remain silent.
NOTE: Alarms without battery backup will not respond during an AC power failure.
NOTE: The relay, model USI-960, will not respond if a CO or natural gas alarm event initiates
the alarm.
Page 6
b. Turn off AC power to the circuit before wiring the alarm.
c. There are three pigtail wires (black, white and yellow) coming from the AC QUICK
CONNECTOR. The proper wire connection is as follows:
WIRES FROM QUICK CONNECTORCONNECT TO
%/$&. ³+27´VLGHRI$&OLQH
:+,7( ³1(875$/´VLGHRI$&OLQH
YELLOW Interconnect wires of other alarms
The yellow wire is used only for interconnect (multiple station operations) USI Electric or
Universal model alarms. Connecting this yellow wire to any other circuits may result in
damage and alarm malfunction. All interconnect alarms must be powered from a single circuit.
If local codes do not specify, be sure the neutral wire is common to all alarms. The maximum
ZLUHUXQGLVWDQFHEHWZHHQWKH¿UVWDQGODVWDODUPGHYLFHLQDQLQWHUFRQQHFWHGV\VWHPLV
1,000 feet. NOTE: Use standard household wire, 18 gauge or larger, rated at least 300V, as
required by local codes. This wire is commonly available at most electrical supply and
hardware stores. The resistance of the interconnect wiring shall be a maximum of 10 Ohms.
The alarm wiring shall be in accordance with the provisions of Articles 210 and 300.3(B) of
WKH1DWLRQDO(OHFWULFDO&RGH$16,1)3$$FFRUGLQJWRWKH1)3$(GSDUDJUDSK
+RXVHKROG )LUH$ODUP 6\VWHPV $& 3ULPDU\ 3RZHU 6RXUFH ³$& SULPDU\ PDLQ
power shall be supplied either from a dedicated branch circuit or the un-switched portion
of a branch circuit also used for power and lighting.”
2. Attach the mounting bracket to the electrical junction box.
3. To activate 9 volt battery and alarm, hold the QUICK DRAW(R) battery drawer closed, pull and
UHPRYHWKH38//7$%&RQ¿UPWKDWWKHHQWLUH38//7$%KDVEHHQFRPSOHWHO\UHPRYHG'LVFDUG
38//7$%
4. Plug the AC QUICK CONNECTOR into the alarm base. Push and twist the alarm clockwise onto
the mounting bracket.
6HH ³237,21$/ 7$03(5 5(6,67$17 )($785(6´ DQG ³72$&7,9$7( 7+( /2&.,1*
)($785(6´LQVWUXFWLRQVRQ3DJH
6. Turn on AC power and check the LED’s for proper operation. The green LED should be on to
indicate AC power. The red LED blinks on once approx. every 40 seconds to indicate proper
operation.
Page 7
IMPORTANT!
7KHEDWWHU\EDFNXSLVGHVLJQHGWRSURYLGHVKRUWWHUPHPHUJHQF\SRZHUWRWKH&2DQG1DWXUDO*DV
Alarm. Actual backup time depends on the strength (freshness) of the battery. The battery backup
will not work unless a good battery is properly installed.
When the alarm utilizes battery backup power, the natural gas sensor will operate the alarm and will
sample less frequently to extend battery life. Natural gas could be present during this period between
samples without the alarm sounding, especially if there is a rapid buildup of natural gas.
127( ,W LV EHVW WR ³UHVHW´ WKH DODUPV EHIRUH LQLWLDO WHVW LV SHUIRUPHG 6HH 3DJH IRU 5HVHW
procedures.
120 VAC 60Hz
100mA Max.
OPERATION, TESTING & MAINTENANCE
OPERATION: The alarm is operating once the AC power is connected and turned on.
READY/ACTIVE CONDITION: The green LED is on and blinks off once approx. every 20 seconds
to indicate the alarm is properly functioning.
GREEN LED: The green LED is off and blinks on approx. every 40 seconds whenever AC power
is turned off.
CO ALARM: The alarm signal is 4 beeps, 5 second pause, repeat. The red LED blinks on in sync
with the cycle of 4 beeps.
GAS ALARM: The alarm signal is 1 beep, 2 second pause, repeat. The blue LED blinks on in
sync with the horn beep.
NUISANCE ALARM: If the horn signals and the red or blue LED’s blink on for no apparent reason
and no obvious hazard is present, please verify that the alarm is mounted in the correct location.
Reset the alarm as instructed in the Operational Summary.
CO ALARM LATCHING LED INDICATOR: The alarm had previously detected CO and had alarmed.
The red LED is off and blinks on approx. every 5 seconds until reset. Follow the reset instructions
to remove the latching LED.
WHAT TO DO IF CARBON MONOXIDE IS DETECTED:
Actuation of your CO Alarm indicates the presence of carbon monoxide (CO), which can kill you.
In other words, when your CO Alarm sounds, you must not ignore it!
Some individuals are more sensitive to CO than others, including people with cardiac or respiratory
problems, infants, unborn babies, pregnant mothers or elderly people can be more quickly and
severely affected by CO. Members of sensitive populations should consult their doctors for advice
on taking additional precautions.
Page 8
If you hear the alarm horn sound 4 beeps, a 2 second pause (and then repeat),
carbon monoxide has been detected. Evacuate everyone from the building.
GAS ALARM LATCHING LED INDICATOR: The alarm had previously detected GAS and had
alarmed. The blue LED is off and blinks on approx. every 5 seconds until reset. Follow the reset
instructions to remove the latching LED.
TROUBLE / SERVICE ALARM: Periodically, the alarm measurement circuit is tested. If an error is
detected, the alarm will sound 3 chirps approx. every 20 seconds. Reset the alarm. If the unit does not
reset, replace the alarm.
END-OF-SERVICE LIFE ALARM: When it is time to replace your alarm, which is approximately 7 years
of operation from initial power up, the alarm will sound 2 chirps approx. every 20 seconds. Replace
DODUPLPPHGLDWHO\7KHSURGXFWHQGRIVHUYLFHOLIHQRWL¿FDWLRQFDQEHWHPSRUDULO\VLOHQFHGIRUDKRXU
period for up to 20 days. After 20 days, the warning cannot be silenced. The alarm should be replaced
immediately.
RESET THE ALARM: Press the TEST/SILENCE button for 10 seconds, or until the blue LED turns on,
and then release. This will clear the alarm latching LED’s and clear the alarm origination. Reset after
each alarm event.
TESTING: Test by pushing the Test button on the alarm cover until the alarm sounds, then release. The
alarm will sound 4 beeps, approx. 5 second pause, 1 beep. The test sequence lasts approx. 7 seconds.
The alarm sounds if all electronic circuitry and horn are working. If no alarm sounds, the alarm may have
a power supply failure. Test the alarm weekly to assure proper operation.
ALARM ORIGINATION: Patented Quick Find® Alarm Origination—In an interconnected system consisting
of any of these models: MI106S, MIC1509S, 5304, MI106, MDS107, MCN108, MICN109, MDSCN111,
03LWPD\EHGLI¿FXOWWRGHWHUPLQHZKLFKDODUPLQLWLDWHGWKHDODUPVWRVRXQGGXULQJDQDODUPHYHQW
This Quick Find® feature will immediately allow you to locate the originating alarm once the alarms have
stopped sounding. To initiate Quick Find®, press and hold the test/silence button on any alarm until the
WHVW VHTXHQFH RQ WKLV DODUP EHJLQV 5HOHDVH WKH WHVW EXWWRQ 7KH VSHFL¿F KRUQ SDWWHUQVHTXHQFH LV
designated by the alarm type. Once this test sequence ends, the originating alarm continues to sound
for approximately 60 seconds, which provides ample time to locate the originating alarm. Remember to
reset the originating alarm in order to clear the Quick Find® alarm origination, and to return your system to
normal operation. Refer to the wiring instructions/model interconnect compatibility section of this manual
IRUDGGLWLRQDOLQIRUPDWLRQ,QDQRQLQWHUFRQQHFWHGLQVWDOODWLRQLWLVQHFHVVDU\WRWHVWHDFKDODUPE\SUHVVLQJ
the test/silence button to determine the originating alarm.
IF THE CO ALARM SOUNDS:
)LQGWKHSDLURIVHOIDGKHVLYHODEHOVLQFOXGHGZLWKWKLV&2DQG1DWXUDO*DV$ODUP
•On each label, write in the phone number of your emergency responder (such as 911) and a
TXDOL¿HGDSSOLDQFHWHFKQLFLDQ
1. Operate SILENCE button;
&DOO\RXUHPHUJHQF\VHUYLFHV¿UHGHSDUWPHQWRU:ULWHGRZQWKHQXPEHURI\RXUORFDO
emergency service here:
,PPHGLDWHO\PRYHWRIUHVKDLURXWGRRUVRUE\DQRSHQGRRUZLQGRZ'RDKHDGFRXQWWRFKHFN
that all persons are accounted for. Do not reenter the premises nor move away from the open
door/window until the emergency services responders have arrived, the premises have been
aired out and your alarm remains in its normal condition.
$IWHUIROORZLQJVWHSVLI\RXUDODUPUHDFWLYDWHVZLWKLQDKRXUSHULRGUHSHDWVWHSV
DQGFDOODTXDOL¿HGDSSOLDQFHWHFKQLFLDQWRLQYHVWLJDWHIRUVRXUFHVRI&2IURPIXHOEXUQLQJ
equipment and appliances and inspect for proper operation of this equipment. If problems are
LGHQWL¿HGGXULQJWKLVLQVSHFWLRQKDYHWKHHTXLSPHQWVHUYLFHGLPPHGLDWHO\1RWHDQ\FRPEXVWLRQ
equipment not inspected by the technician and consult the manufacturers’ instructions or
contact the manufacturer(s) directly for more information about CO safety and this equipment.
Make sure that motor vehicles are not, and have not been, operating in an attached garage
or adjacent to the residence. Write down the number of your local emergency service here:
The yellow wire is used only for interconnect (multiple station operations) USI Electric or
Universal model alarms. Connecting this yellow wire to any other circuits may result in
damage and alarm malfunction. All interconnect alarms must be powered from a single circuit.
If local codes do not specify, be sure the neutral wire is common to all alarms. The maximum
ZLUHUXQGLVWDQFHEHWZHHQWKH¿UVWDQGODVWDODUPGHYLFHLQDQLQWHUFRQQHFWHGV\VWHPLV
1,000 feet. NOTE: Use standard household wire, 18 gauge or larger, rated at least 300V, as
required by local codes. This wire is commonly available at most electrical supply and
hardware stores. The resistance of the interconnect wiring shall be a maximum of 10 Ohms.
The alarm wiring shall be in accordance with the provisions of Articles 210 and 300.3(B) of
WKH1DWLRQDO(OHFWULFDO&RGH$16,1)3$$FFRUGLQJWRWKH1)3$(GSDUDJUDSK
+RXVHKROG )LUH$ODUP 6\VWHPV $& 3ULPDU\ 3RZHU 6RXUFH ³$& SULPDU\ PDLQ
power shall be supplied either from a dedicated branch circuit or the un-switched portion
of a branch circuit also used for power and lighting.”
2. Attach the mounting bracket to the electrical junction box.
3. To activate 9 volt battery and alarm, hold the QUICK DRAW(R) battery drawer closed, pull and
UHPRYHWKH38//7$%&RQ¿UPWKDWWKHHQWLUH38//7$%KDVEHHQFRPSOHWHO\UHPRYHG'LVFDUG
38//7$%
4. Plug the AC QUICK CONNECTOR into the alarm base. Push and twist the alarm clockwise onto
the mounting bracket.
6HH ³237,21$/ 7$03(5 5(6,67$17 )($785(6´ DQG ³72$&7,9$7( 7+( /2&.,1*
)($785(6´LQVWUXFWLRQVRQ3DJH
6. Turn on AC power and check the LED’s for proper operation. The green LED should be on to
indicate AC power. The red LED blinks on once approx. every 40 seconds to indicate proper
operation.
Page 7
IMPORTANT!
7KHEDWWHU\EDFNXSLVGHVLJQHGWRSURYLGHVKRUWWHUPHPHUJHQF\SRZHUWRWKH&2DQG1DWXUDO*DV
Alarm. Actual backup time depends on the strength (freshness) of the battery. The battery backup
will not work unless a good battery is properly installed.
When the alarm utilizes battery backup power, the natural gas sensor will operate the alarm and will
sample less frequently to extend battery life. Natural gas could be present during this period between
samples without the alarm sounding, especially if there is a rapid buildup of natural gas.
127( ,W LV EHVW WR ³UHVHW´ WKH DODUPV EHIRUH LQLWLDO WHVW LV SHUIRUPHG 6HH 3DJH IRU 5HVHW
procedures.
120 VAC 60Hz
100mA Max.
OPERATION, TESTING & MAINTENANCE
OPERATION: The alarm is operating once the AC power is connected and turned on.
READY/ACTIVE CONDITION: The green LED is on and blinks off once approx. every 20 seconds
to indicate the alarm is properly functioning.
GREEN LED: The green LED is off and blinks on approx. every 40 seconds whenever AC power
is turned off.
CO ALARM: The alarm signal is 4 beeps, 5 second pause, repeat. The red LED blinks on in sync
with the cycle of 4 beeps.
GAS ALARM: The alarm signal is 1 beep, 2 second pause, repeat. The blue LED blinks on in
sync with the horn beep.
NUISANCE ALARM: If the horn signals and the red or blue LED’s blink on for no apparent reason
and no obvious hazard is present, please verify that the alarm is mounted in the correct location.
Reset the alarm as instructed in the Operational Summary.
CO ALARM LATCHING LED INDICATOR: The alarm had previously detected CO and had alarmed.
The red LED is off and blinks on approx. every 5 seconds until reset. Follow the reset instructions
to remove the latching LED.
WHAT TO DO IF CARBON MONOXIDE IS DETECTED:
Actuation of your CO Alarm indicates the presence of carbon monoxide (CO), which can kill you.
In other words, when your CO Alarm sounds, you must not ignore it!
Some individuals are more sensitive to CO than others, including people with cardiac or respiratory
problems, infants, unborn babies, pregnant mothers or elderly people can be more quickly and
severely affected by CO. Members of sensitive populations should consult their doctors for advice
on taking additional precautions.
Page 8
If you hear the alarm horn sound 4 beeps, a 2 second pause (and then repeat),
carbon monoxide has been detected. Evacuate everyone from the building.
GAS ALARM LATCHING LED INDICATOR: The alarm had previously detected GAS and had
alarmed. The blue LED is off and blinks on approx. every 5 seconds until reset. Follow the reset
instructions to remove the latching LED.
TROUBLE / SERVICE ALARM: Periodically, the alarm measurement circuit is tested. If an error is
detected, the alarm will sound 3 chirps approx. every 20 seconds. Reset the alarm. If the unit does not
reset, replace the alarm.
END-OF-SERVICE LIFE ALARM: When it is time to replace your alarm, which is approximately 7 years
of operation from initial power up, the alarm will sound 2 chirps approx. every 20 seconds. Replace
DODUPLPPHGLDWHO\7KHSURGXFWHQGRIVHUYLFHOLIHQRWL¿FDWLRQFDQEHWHPSRUDULO\VLOHQFHGIRUDKRXU
period for up to 20 days. After 20 days, the warning cannot be silenced. The alarm should be replaced
immediately.
RESET THE ALARM: Press the TEST/SILENCE button for 10 seconds, or until the blue LED turns on,
and then release. This will clear the alarm latching LED’s and clear the alarm origination. Reset after
each alarm event.
TESTING: Test by pushing the Test button on the alarm cover until the alarm sounds, then release. The
alarm will sound 4 beeps, approx. 5 second pause, 1 beep. The test sequence lasts approx. 7 seconds.
The alarm sounds if all electronic circuitry and horn are working. If no alarm sounds, the alarm may have
a power supply failure. Test the alarm weekly to assure proper operation.
ALARM ORIGINATION: Patented Quick Find® Alarm Origination—In an interconnected system consisting
of any of these models: MI106S, MIC1509S, 5304, MI106, MDS107, MCN108, MICN109, MDSCN111,
03LWPD\EHGLI¿FXOWWRGHWHUPLQHZKLFKDODUPLQLWLDWHGWKHDODUPVWRVRXQGGXULQJDQDODUPHYHQW
This Quick Find® feature will immediately allow you to locate the originating alarm once the alarms have
stopped sounding. To initiate Quick Find®, press and hold the test/silence button on any alarm until the
WHVW VHTXHQFH RQ WKLV DODUP EHJLQV 5HOHDVH WKH WHVW EXWWRQ 7KH VSHFL¿F KRUQ SDWWHUQVHTXHQFH LV
designated by the alarm type. Once this test sequence ends, the originating alarm continues to sound
for approximately 60 seconds, which provides ample time to locate the originating alarm. Remember to
reset the originating alarm in order to clear the Quick Find® alarm origination, and to return your system to
normal operation. Refer to the wiring instructions/model interconnect compatibility section of this manual
IRUDGGLWLRQDOLQIRUPDWLRQ,QDQRQLQWHUFRQQHFWHGLQVWDOODWLRQLWLVQHFHVVDU\WRWHVWHDFKDODUPE\SUHVVLQJ
the test/silence button to determine the originating alarm.
IF THE CO ALARM SOUNDS:
)LQGWKHSDLURIVHOIDGKHVLYHODEHOVLQFOXGHGZLWKWKLV&2DQG1DWXUDO*DV$ODUP
•On each label, write in the phone number of your emergency responder (such as 911) and a
TXDOL¿HGDSSOLDQFHWHFKQLFLDQ
1. Operate SILENCE button;
&DOO\RXUHPHUJHQF\VHUYLFHV¿UHGHSDUWPHQWRU:ULWHGRZQWKHQXPEHURI\RXUORFDO
emergency service here:
,PPHGLDWHO\PRYHWRIUHVKDLURXWGRRUVRUE\DQRSHQGRRUZLQGRZ'RDKHDGFRXQWWRFKHFN
that all persons are accounted for. Do not reenter the premises nor move away from the open
door/window until the emergency services responders have arrived, the premises have been
aired out and your alarm remains in its normal condition.
$IWHUIROORZLQJVWHSVLI\RXUDODUPUHDFWLYDWHVZLWKLQDKRXUSHULRGUHSHDWVWHSV
DQGFDOODTXDOL¿HGDSSOLDQFHWHFKQLFLDQWRLQYHVWLJDWHIRUVRXUFHVRI&2IURPIXHOEXUQLQJ
equipment and appliances and inspect for proper operation of this equipment. If problems are
LGHQWL¿HGGXULQJWKLVLQVSHFWLRQKDYHWKHHTXLSPHQWVHUYLFHGLPPHGLDWHO\1RWHDQ\FRPEXVWLRQ
equipment not inspected by the technician and consult the manufacturers’ instructions or
contact the manufacturer(s) directly for more information about CO safety and this equipment.
Make sure that motor vehicles are not, and have not been, operating in an attached garage
or adjacent to the residence. Write down the number of your local emergency service here:
Page 9
If the unit alarms and you are not testing the unit, it is warning you of a potentially dangerous
situation which requires your immediate attention. NEVER ignore any alarm. Ignoring the
alarm may result in injury or death.
WHAT TO DO IF NATURAL GAS IS DETECTED:
1. Leave the house immediately, opening doors and windows as you leave.
2. Do not use your telephone or appliances. Do not turn any light switches off or on. Any
VSDUNRUÀDPHFRXOGLJQLWHWKHJDV
3. Call 911 and your gas company from a phone that is away from your home.
4. Do not reenter the area until the source of the leak is found and corrected.
If you hear the alarm horn sound approx. 1 beep, 2 second pause,
repeat, gas has been detected. Evacuate everyone from the building.
USING THE CO ALARM SIGNAL SILENCE FEATURE (GAS ALARM SIGNAL CANNOT
BE SILENCED)
NEVER GLVFRQQHFW WKH SRZHU WR \RXU DODUP WR VLOHQFH WKH KRUQ XVH WKH 6LOHQFH IHDWXUH
Disconnecting the alarm removes your protection!
•The Silence feature is intended to temporarily silence the horn while you identify and
correct the problem.
•To use the Silence feature, press and release the TEST/SILENCE button until the horn
is silent if it was the initiating alarm.
•If the TEST/SILENCE button is pressed while the alarm is in the silence mode, the alarm
will start sounding again.
WHEN THE CO ALARM SIGNAL IS SILENCED: The CO alarm Silence Feature can be activated
by pressing and releasing the Test/CO Silence button on the initiating alarm while in alarm condition.
The alarm will remain silent for approx. 5 minutes (with the red LED blinking on approx. every 10
seconds), depending on the level of CO detected. If CO levels drop below alarm levels, the alarm
will remain silent and return to normal operation. If CO levels remain constant or increase, this
indicates a potentially dangerous situation and the horn will sound again. Ventilate area.
IMPORTANT!
The Silence feature is intended to temporarily silence the alarm horn. It will not correct a CO or
Natural Gas problem. The Gas Alarm signal cannot be silenced.
RESET: To reset the QUICK FIND®Alarm Origination condition, press and hold the TEST/
SILENCE button on any alarm for at least 10 seconds, or until the blue LED turns on, and
then release. Reset after each alarm. The reset feature will reset all interconnected units.
SENSOR TROUBLE/SERVICE ALARM: If the alarm chirps 3 times approx. every 20 seconds and
cannot be restored to normal operation, the alarm should be replaced immediately.
END-OF-SERVICE LIFE NOTIFICATION: ,Q DGGLWLRQ WR WKH ³UHSODFH E\ GDWH´ VWDPSHG RQ WKH
EDFNRI\RXUDODUP\RXUDODUPFRQWDLQVDXQLTXHDXGLEOHHQGRIVHUYLFHOLIHQRWL¿FDWLRQIHDWXUH
When it is time to replace your alarm, which is after approx. 7 years of operation from initial power
up, the alarm will sound 2 chirps approx. every 20 seconds. The green LED stays on. The alarm
should be replaced immediately.
7KHSURGXFWHQGRIVHUYLFHOLIHQRWL¿FDWLRQFDQEHWHPSRUDULO\VLOHQFHGIRUDKRXUSHULRGIRU
up to 20 days. After 20 days, the warning cannot be silenced. The alarm should be replaced
immediately.
Clean the alarm at least once a month to remove dust, dirt, insects or debris. Always turn off power
to alarm before cleaning. Using a soft brush or wand attachment to a vacuum cleaner, vacuum all
sides and cover of the alarm. Be sure all the vents are free of debris.
If the alarm is false alarming and cannot be restored to normal operation, the alarm should be
replaced.
•3ODFHRQHODEHOQHDUWKH&2DQG1DWXUDO*DV$ODUPDQGWKHRWKHUODEHOLQWKH³IUHVKDLU´ORFDWLRQ
you plan to go to if the alarm sounds.
Page 10
BACKUP BATTERY REPLACEMENT
Disconnect AC power before changing battery. Shock hazard exists if AC power is
miswired.
The alarm uses a 9 Volt battery. The battery should last for at least one year under normal operating
conditions. The alarm has a low battery indicator, an audible beep or chirp. It will operate at approx.
40 second intervals for a minimum of 7 days. When this indication occurs, replace the battery with
an Alkaline type (Energizer #522, Duracell #MN1604, Zeus 9V), or Lithium type (Energizer LA522,
8OWUDOLIH89/-89/-3IURP\RXUORFDOUHWDLOHU
OPTIONAL BATTERY DRAWER TAMPER LOCKING PIN: To make your battery drawer tamper
resistant, a locking pin has been provided (breakaway part on mounting bracket).
NOTE: If this feature has been activated, you will need to deactivate it by removing the battery
drawer tamper pin located at side of battery drawer. Refer to Page 5.
Pull the QUICK DRAW(R) battery drawer open and remove the battery. While observing polarity,
push the replacement battery into the battery drawer until it is held securely in place. Carefully
close the battery drawer and reinstall the tamper pin.
Test the alarm by pushing the TEST button on the alarm cover until the alarm sounds, then
release.
REPAIRS AND SERVICES
If this alarm is defective in any way, do not tamper with it. Return the alarm for servicing. See warranty
for instructions. There will be a service charge for repairing out of warranty alarms.
WEEKLY TESTING
This alarm is designed to act as a monitor, not for use as a short-term testing device, to
perform a quick check for the presence of CO or gas. WARNING: Natural gas (methane)
is highly explosive. An attempt to test the unit by exposing it to natural gas outside of a
controlled labatory environment can produce an explosion and death. NEVER use a gas
UDQJHRUDQRSHQÀDPHRIDQ\NLQGWRWHVWWKLVDODUP<RXPLJKWDFFLGHQWDOO\GDPDJH or set
¿UHWRWKHDODUPRUWR\RXUKRPH1(9(5XVHYHKLFOHH[KDXVWWRWHVWWKHDODUP([KDXVWPD\FDXVH
SHUPDQHQWGDPDJHDQGYRLGV\RXUZDUUDQW\7KHEXLOWLQWHVWVZLWFKDFFXUDWHO\WHVWVWKHDODUP
operation as required by ANSI/UL2034 Standard for Safety. If, at any time, you test the alarm and
it does not perform as described, replace it immediately.
It is important to test this alarm every week to make sure it is working properly.
USING THE TEST FEATURE:
Press and release the TEST button on the alarm cover.
During testing, you will hear: 4 beeps (red LED on), 5 second pause, 1 beep (blue LED on).
If the alarm does not sound properly:
1. Make sure the AC power is applied and the battery is fresh and installed correctly.
2. Test the alarm again.
7KLVDODUPFDQRQO\EHWHVWHGDQGUHVHWXVLQJDQDHURVROWHVWJDVRUE\WKHXVHRIDSHUVRQ¶V¿QJHU
or thumb. Use of any other instrument(s) is strictly prohibited.
REGULAR MAINTENANCE
CLEANING YOUR ALARM:
DO NOT use spray cleaning chemicals or insect sprays directly on or near the alarm. DO NOT
paint over the alarm. Doing so may permanently damage the alarm.
7KHRXWVLGHFDQEHZLSHGZLWKDGDPSFORWK'RQRWXVHDQ\KRXVHKROGFOHDQLQJDJHQWVDPPRQLD
based cleaners, paints, varnishes, most aerosol sprays including compressed gas dusters or any
other chemical on or near your alarm. AFTER CLEANING, REINSTALL YOUR ALARM. TEST
YOUR ALARM BY USING THE TEST BUTTON.
Page 9
If the unit alarms and you are not testing the unit, it is warning you of a potentially dangerous
situation which requires your immediate attention. NEVER ignore any alarm. Ignoring the
alarm may result in injury or death.
WHAT TO DO IF NATURAL GAS IS DETECTED:
1. Leave the house immediately, opening doors and windows as you leave.
2. Do not use your telephone or appliances. Do not turn any light switches off or on. Any
VSDUNRUÀDPHFRXOGLJQLWHWKHJDV
3. Call 911 and your gas company from a phone that is away from your home.
4. Do not reenter the area until the source of the leak is found and corrected.
If you hear the alarm horn sound approx. 1 beep, 2 second pause,
repeat, gas has been detected. Evacuate everyone from the building.
USING THE CO ALARM SIGNAL SILENCE FEATURE (GAS ALARM SIGNAL CANNOT
BE SILENCED)
NEVER GLVFRQQHFW WKH SRZHU WR \RXU DODUP WR VLOHQFH WKH KRUQ XVH WKH 6LOHQFH IHDWXUH
Disconnecting the alarm removes your protection!
•The Silence feature is intended to temporarily silence the horn while you identify and
correct the problem.
•To use the Silence feature, press and release the TEST/SILENCE button until the horn
is silent if it was the initiating alarm.
•If the TEST/SILENCE button is pressed while the alarm is in the silence mode, the alarm
will start sounding again.
WHEN THE CO ALARM SIGNAL IS SILENCED: The CO alarm Silence Feature can be activated
by pressing and releasing the Test/CO Silence button on the initiating alarm while in alarm condition.
The alarm will remain silent for approx. 5 minutes (with the red LED blinking on approx. every 10
seconds), depending on the level of CO detected. If CO levels drop below alarm levels, the alarm
will remain silent and return to normal operation. If CO levels remain constant or increase, this
indicates a potentially dangerous situation and the horn will sound again. Ventilate area.
IMPORTANT!
The Silence feature is intended to temporarily silence the alarm horn. It will not correct a CO or
Natural Gas problem. The Gas Alarm signal cannot be silenced.
RESET: To reset the QUICK FIND®Alarm Origination condition, press and hold the TEST/
SILENCE button on any alarm for at least 10 seconds, or until the blue LED turns on, and
then release. Reset after each alarm. The reset feature will reset all interconnected units.
SENSOR TROUBLE/SERVICE ALARM: If the alarm chirps 3 times approx. every 20 seconds and
cannot be restored to normal operation, the alarm should be replaced immediately.
END-OF-SERVICE LIFE NOTIFICATION: ,Q DGGLWLRQ WR WKH ³UHSODFH E\ GDWH´ VWDPSHG RQ WKH
EDFNRI\RXUDODUP\RXUDODUPFRQWDLQVDXQLTXHDXGLEOHHQGRIVHUYLFHOLIHQRWL¿FDWLRQIHDWXUH
When it is time to replace your alarm, which is after approx. 7 years of operation from initial power
up, the alarm will sound 2 chirps approx. every 20 seconds. The green LED stays on. The alarm
should be replaced immediately.
7KHSURGXFWHQGRIVHUYLFHOLIHQRWL¿FDWLRQFDQEHWHPSRUDULO\VLOHQFHGIRUDKRXUSHULRGIRU
up to 20 days. After 20 days, the warning cannot be silenced. The alarm should be replaced
immediately.
Clean the alarm at least once a month to remove dust, dirt, insects or debris. Always turn off power
to alarm before cleaning. Using a soft brush or wand attachment to a vacuum cleaner, vacuum all
sides and cover of the alarm. Be sure all the vents are free of debris.
If the alarm is false alarming and cannot be restored to normal operation, the alarm should be
replaced.
•3ODFHRQHODEHOQHDUWKH&2DQG1DWXUDO*DV$ODUPDQGWKHRWKHUODEHOLQWKH³IUHVKDLU´ORFDWLRQ
you plan to go to if the alarm sounds.
Page 10
BACKUP BATTERY REPLACEMENT
Disconnect AC power before changing battery. Shock hazard exists if AC power is
miswired.
The alarm uses a 9 Volt battery. The battery should last for at least one year under normal operating
conditions. The alarm has a low battery indicator, an audible beep or chirp. It will operate at approx.
40 second intervals for a minimum of 7 days. When this indication occurs, replace the battery with
an Alkaline type (Energizer #522, Duracell #MN1604, Zeus 9V), or Lithium type (Energizer LA522,
8OWUDOLIH89/-89/-3IURP\RXUORFDOUHWDLOHU
OPTIONAL BATTERY DRAWER TAMPER LOCKING PIN: To make your battery drawer tamper
resistant, a locking pin has been provided (breakaway part on mounting bracket).
NOTE: If this feature has been activated, you will need to deactivate it by removing the battery
drawer tamper pin located at side of battery drawer. Refer to Page 5.
Pull the QUICK DRAW(R) battery drawer open and remove the battery. While observing polarity,
push the replacement battery into the battery drawer until it is held securely in place. Carefully
close the battery drawer and reinstall the tamper pin.
Test the alarm by pushing the TEST button on the alarm cover until the alarm sounds, then
release.
REPAIRS AND SERVICES
If this alarm is defective in any way, do not tamper with it. Return the alarm for servicing. See warranty
for instructions. There will be a service charge for repairing out of warranty alarms.
WEEKLY TESTING
This alarm is designed to act as a monitor, not for use as a short-term testing device, to
perform a quick check for the presence of CO or gas. WARNING: Natural gas (methane)
is highly explosive. An attempt to test the unit by exposing it to natural gas outside of a
controlled labatory environment can produce an explosion and death. NEVER use a gas
UDQJHRUDQRSHQÀDPHRIDQ\NLQGWRWHVWWKLVDODUP<RXPLJKWDFFLGHQWDOO\GDPDJH or set
¿UHWRWKHDODUPRUWR\RXUKRPH1(9(5XVHYHKLFOHH[KDXVWWRWHVWWKHDODUP([KDXVWPD\FDXVH
SHUPDQHQWGDPDJHDQGYRLGV\RXUZDUUDQW\7KHEXLOWLQWHVWVZLWFKDFFXUDWHO\WHVWVWKHDODUP
operation as required by ANSI/UL2034 Standard for Safety. If, at any time, you test the alarm and
it does not perform as described, replace it immediately.
It is important to test this alarm every week to make sure it is working properly.
USING THE TEST FEATURE:
Press and release the TEST button on the alarm cover.
During testing, you will hear: 4 beeps (red LED on), 5 second pause, 1 beep (blue LED on).
If the alarm does not sound properly:
1. Make sure the AC power is applied and the battery is fresh and installed correctly.
2. Test the alarm again.
7KLVDODUPFDQRQO\EHWHVWHGDQGUHVHWXVLQJDQDHURVROWHVWJDVRUE\WKHXVHRIDSHUVRQ¶V¿QJHU
or thumb. Use of any other instrument(s) is strictly prohibited.
REGULAR MAINTENANCE
CLEANING YOUR ALARM:
DO NOT use spray cleaning chemicals or insect sprays directly on or near the alarm. DO NOT
paint over the alarm. Doing so may permanently damage the alarm.
7KHRXWVLGHFDQEHZLSHGZLWKDGDPSFORWK'RQRWXVHDQ\KRXVHKROGFOHDQLQJDJHQWVDPPRQLD
based cleaners, paints, varnishes, most aerosol sprays including compressed gas dusters or any
other chemical on or near your alarm. AFTER CLEANING, REINSTALL YOUR ALARM. TEST
YOUR ALARM BY USING THE TEST BUTTON.
Page 11
CO AND NATURAL GAS ALARM LIMITATIONS
Alarms have limitations. Like any other electronic device, CO and Natural Gas alarms are not
foolproof.
CO and Natural Gas alarms have a limited operational life. Your alarm must be tested weekly,
EHFDXVHLWFRXOGIDLOWRRSHUDWHDWDQ\WLPH,I\RXU$ODUPIDLOVWRWHVWSURSHUO\RULILWVVHOIGLDJQRVWLF
test reveals a malfunction, immediately have the unit replaced (see last page for warranty
information).
CO and Natural Gas alarms can only sense CO which reaches the alarm’s sensor. Carbon monoxide
may be present in other areas without reaching the alarm.
CO or gas could be present on one level of the home and not reach the alarm installed on a different
level. For example, CO or gas in the basement may not reach an alarm on the second level, near
the bedrooms. For this reason, we recommend you provide complete coverage by placing a CO
and Natural Gas alarm on every level of the home.
CO and Natural Gas alarms are not a substitute for property, disability, life or other insurance of
any kind. Appropriate coverage is your responsibility.
POTENTIAL SOURCES OF CO IN THE HOME
Fuel-burning appliances, such as;KHDWHUVJDVRUZRRGEXUQLQJ¿UHSODFHVJDVNLWFKHQUDQJHV
or cooktops, gas clothes dryers.
'DPDJHGRULQVXI¿FLHQWYHQWLQJVXFKDV corroded or disconnected water heaters, vent pipes,
OHDNLQJFKLPQH\VSLSHVRUÀXHVRUFUDFNHGKHDWH[FKDQJHUVEORFNHGRUFORJJHGFKLPQH\RSHQLQJV
Improper use of appliances/devices; operating a barbeque grill or vehicle in an enclosed area
(such as a garage or screened porch).
Transient CO Problems: ³WUDQVLHQW´RURQDJDLQRIIDJDLQ&2SUREOHPVFDQEHFDXVHGE\RXWGRRU
conditions and other special circumstances.
The following conditions can result in transient CO situations:
([FHVVLYHVSLOODJHRUUHYHUVHYHQWLQJRIIXHOEXUQLQJDSSOLDQFHVFDXVHGE\RXWGRRUDPELHQW
conditions, such as:
•Wind direction and/or velocity, including high gusts of wind. Heavy air in the vent pipes (cold/
humid air with extended periods between cycles).
•Negative pressure differential resulting from the use of exhaust fans.
•6LPXOWDQHRXVRSHUDWLRQRIVHYHUDOIXHOEXUQLQJDSSOLDQFHVFRPSHWLQJIRUOLPLWHGLQWHUQDODLU
•Vent pipe connections vibrating loose from clothes dryers, furnaces or water heaters.
•Obstructions in or unconventional vent pipe designs which can amplify the above situations.
([WHQGHGRSHUDWLRQRIXQYHQWHGIXHOEXUQLQJGHYLFHVUDQJHVRYHQV¿UHSODFHV
3. Temperature inversions which can trap exhaust close to the ground.
4. A car idling in an open or closed attached garage or near a home.
HOW CAN I PROTECT MY FAMILY FROM CO POISONING?
This alarm is an excellent means of protection. It monitors the air and sounds a loud alarm before
carbon monoxide levels become threatening to the average, healthy adult.
An alarm is not a substitute for proper maintenance of home appliances.
To help prevent CO problems and reduce the risk of CO poisoning:
•&OHDQFKLPQH\VDQGÀXHV\HDUO\.HHSWKHPIUHHRIGHEULVOHDYHVDQGQHVWVIRUSURSHUDLU
ÀRZ$OVRKDYHDSURIHVVLRQDO FKHFN IRU UXVW DQG FRUURVLRQ FUDFNV RU VHSDUDWLRQV7KHVH
FRQGLWLRQVFDQSUHYHQWSURSHUDLUPRYHPHQWDQGFDXVHEDFNGUDIWLQJ1HYHU³FDS´RUFRYHUD
FKLPQH\LQDQ\ZD\WKDWZRXOGEORFNDLUÀRZ
•7HVWDQGPDLQWDLQDOOIXHOEXUQLQJHTXLSPHQWDQQXDOO\0DQ\ORFDOJDVRURLOFRPSDQLHVDQG
HVAC companies offer appliance inspections for a nominal fee.
•0DNHUHJXODUYLVXDOLQVSHFWLRQVRIDOOIXHOEXUQLQJDSSOLDQFHV&KHFNDSSOLDQFHVIRUH[FHVVLYH
UXVWDQGVFDOLQJ$OVRFKHFNWKHÀDPHRQWKHEXUQHUDQGSLORWOLJKWV7KHÀDPHVKRXOGEHEOXH
$\HOORZÀDPHPHDQVIXHOLVQRWEHLQJEXUQHGFRPSOHWHO\DQG&2PD\EHSUHVHQW.HHSWKH
EORZHUGRRURQWKHIXUQDFHFORVHG8VHYHQWVRUIDQVZKHQWKH\DUHDYDLODEOHRQDOOIXHOEXUQLQJ
appliances. Make sure appliances are vented to the outside. Do not grill or barbecue indoors
or in garages or screen porches.
•&KHFNIRUH[KDXVWEDFNÀRZIURP&2VRXUFHV&KHFNWKHGUDIWKRRGRQDQRSHUDWLQJIXUQDFH
for a backdraft. Look for cracks on furnace heat exchangers.
•Check the house or garage on the other side of a shared wall.
•Keep windows and doors open slightly. If you suspect that CO is escaping into your home,
RSHQDZLQGRZRUDGRRU2SHQLQJZLQGRZVDQGGRRUVFDQVLJQL¿FDQWO\GHFUHDVH&2OHYHOV
Page 10
BACKUP BATTERY REPLACEMENT
Disconnect AC power before changing battery. Shock hazard exists if AC power is
miswired.
The alarm uses a 9 Volt battery. The battery should last for at least one year under normal operating
conditions. The alarm has a low battery indicator, an audible beep or chirp. It will operate at approx.
40 second intervals for a minimum of 7 days. When this indication occurs, replace the battery with
an Alkaline type (Energizer #522, Duracell #MN1604, Zeus 9V), or Lithium type (Energizer LA522,
8OWUDOLIH89/-89/-3IURP\RXUORFDOUHWDLOHU
OPTIONAL BATTERY DRAWER TAMPER LOCKING PIN: To make your battery drawer tamper
resistant, a locking pin has been provided (breakaway part on mounting bracket).
NOTE: If this feature has been activated, you will need to deactivate it by removing the battery
drawer tamper pin located at side of battery drawer. Refer to Page 5.
Pull the QUICK DRAW(R) battery drawer open and remove the battery. While observing polarity,
push the replacement battery into the battery drawer until it is held securely in place. Carefully
close the battery drawer and reinstall the tamper pin.
Test the alarm by pushing the TEST button on the alarm cover until the alarm sounds, then
release.
REPAIRS AND SERVICES
If this alarm is defective in any way, do not tamper with it. Return the alarm for servicing. See warranty
for instructions. There will be a service charge for repairing out of warranty alarms.
WEEKLY TESTING
This alarm is designed to act as a monitor, not for use as a short-term testing device, to
perform a quick check for the presence of CO or gas. WARNING: Natural gas (methane)
is highly explosive. An attempt to test the unit by exposing it to natural gas outside of a
controlled labatory environment can produce an explosion and death. NEVER use a gas
UDQJHRUDQRSHQÀDPHRIDQ\NLQGWRWHVWWKLVDODUP<RXPLJKWDFFLGHQWDOO\GDPDJH or set
¿UHWRWKHDODUPRUWR\RXUKRPH1(9(5XVHYHKLFOHH[KDXVWWRWHVWWKHDODUP([KDXVWPD\FDXVH
SHUPDQHQWGDPDJHDQGYRLGV\RXUZDUUDQW\7KHEXLOWLQWHVWVZLWFKDFFXUDWHO\WHVWVWKHDODUP
operation as required by ANSI/UL2034 Standard for Safety. If, at any time, you test the alarm and
it does not perform as described, replace it immediately.
It is important to test this alarm every week to make sure it is working properly.
USING THE TEST FEATURE:
Press and release the TEST button on the alarm cover.
During testing, you will hear: 4 beeps (red LED on), 5 second pause, 1 beep (blue LED on).
If the alarm does not sound properly:
1. Make sure the AC power is applied and the battery is fresh and installed correctly.
2. Test the alarm again.
7KLVDODUPFDQRQO\EHWHVWHGDQGUHVHWXVLQJDQDHURVROWHVWJDVRUE\WKHXVHRIDSHUVRQ¶V¿QJHU
or thumb. Use of any other instrument(s) is strictly prohibited.
REGULAR MAINTENANCE
CLEANING YOUR ALARM:
DO NOT use spray cleaning chemicals or insect sprays directly on or near the alarm. DO NOT
paint over the alarm. Doing so may permanently damage the alarm.
7KHRXWVLGHFDQEHZLSHGZLWKDGDPSFORWK'RQRWXVHDQ\KRXVHKROGFOHDQLQJDJHQWVDPPRQLD
based cleaners, paints, varnishes, most aerosol sprays including compressed gas dusters or any
other chemical on or near your alarm. AFTER CLEANING, REINSTALL YOUR ALARM. TEST
YOUR ALARM BY USING THE TEST BUTTON.
Page 11
CO AND NATURAL GAS ALARM LIMITATIONS
Alarms have limitations. Like any other electronic device, CO and Natural Gas alarms are not
foolproof.
CO and Natural Gas alarms have a limited operational life. Your alarm must be tested weekly,
EHFDXVHLWFRXOGIDLOWRRSHUDWHDWDQ\WLPH,I\RXU$ODUPIDLOVWRWHVWSURSHUO\RULILWVVHOIGLDJQRVWLF
test reveals a malfunction, immediately have the unit replaced (see last page for warranty
information).
CO and Natural Gas alarms can only sense CO which reaches the alarm’s sensor. Carbon monoxide
may be present in other areas without reaching the alarm.
CO or gas could be present on one level of the home and not reach the alarm installed on a different
level. For example, CO or gas in the basement may not reach an alarm on the second level, near
the bedrooms. For this reason, we recommend you provide complete coverage by placing a CO
and Natural Gas alarm on every level of the home.
CO and Natural Gas alarms are not a substitute for property, disability, life or other insurance of
any kind. Appropriate coverage is your responsibility.
POTENTIAL SOURCES OF CO IN THE HOME
Fuel-burning appliances, such as;KHDWHUVJDVRUZRRGEXUQLQJ¿UHSODFHVJDVNLWFKHQUDQJHV
or cooktops, gas clothes dryers.
'DPDJHGRULQVXI¿FLHQWYHQWLQJVXFKDV corroded or disconnected water heaters, vent pipes,
OHDNLQJFKLPQH\VSLSHVRUÀXHVRUFUDFNHGKHDWH[FKDQJHUVEORFNHGRUFORJJHGFKLPQH\RSHQLQJV
Improper use of appliances/devices; operating a barbeque grill or vehicle in an enclosed area
(such as a garage or screened porch).
Transient CO Problems: ³WUDQVLHQW´RURQDJDLQRIIDJDLQ&2SUREOHPVFDQEHFDXVHGE\RXWGRRU
conditions and other special circumstances.
The following conditions can result in transient CO situations:
([FHVVLYHVSLOODJHRUUHYHUVHYHQWLQJRIIXHOEXUQLQJDSSOLDQFHVFDXVHGE\RXWGRRUDPELHQW
conditions, such as:
•Wind direction and/or velocity, including high gusts of wind. Heavy air in the vent pipes (cold/
humid air with extended periods between cycles).
•Negative pressure differential resulting from the use of exhaust fans.
•6LPXOWDQHRXVRSHUDWLRQRIVHYHUDOIXHOEXUQLQJDSSOLDQFHVFRPSHWLQJIRUOLPLWHGLQWHUQDODLU
•Vent pipe connections vibrating loose from clothes dryers, furnaces or water heaters.
•Obstructions in or unconventional vent pipe designs which can amplify the above situations.
([WHQGHGRSHUDWLRQRIXQYHQWHGIXHOEXUQLQJGHYLFHVUDQJHVRYHQV¿UHSODFHV
3. Temperature inversions which can trap exhaust close to the ground.
4. A car idling in an open or closed attached garage or near a home.
HOW CAN I PROTECT MY FAMILY FROM CO POISONING?
This alarm is an excellent means of protection. It monitors the air and sounds a loud alarm before
carbon monoxide levels become threatening to the average, healthy adult.
An alarm is not a substitute for proper maintenance of home appliances.
To help prevent CO problems and reduce the risk of CO poisoning:
•&OHDQFKLPQH\VDQGÀXHV\HDUO\.HHSWKHPIUHHRIGHEULVOHDYHVDQGQHVWVIRUSURSHUDLU
ÀRZ$OVRKDYHDSURIHVVLRQDO FKHFN IRU UXVW DQG FRUURVLRQ FUDFNV RU VHSDUDWLRQV7KHVH
FRQGLWLRQVFDQSUHYHQWSURSHUDLUPRYHPHQWDQGFDXVHEDFNGUDIWLQJ1HYHU³FDS´RUFRYHUD
FKLPQH\LQDQ\ZD\WKDWZRXOGEORFNDLUÀRZ
•7HVWDQGPDLQWDLQDOOIXHOEXUQLQJHTXLSPHQWDQQXDOO\0DQ\ORFDOJDVRURLOFRPSDQLHVDQG
HVAC companies offer appliance inspections for a nominal fee.
•0DNHUHJXODUYLVXDOLQVSHFWLRQVRIDOOIXHOEXUQLQJDSSOLDQFHV&KHFNDSSOLDQFHVIRUH[FHVVLYH
UXVWDQGVFDOLQJ$OVRFKHFNWKHÀDPHRQWKHEXUQHUDQGSLORWOLJKWV7KHÀDPHVKRXOGEHEOXH
$\HOORZÀDPHPHDQVIXHOLVQRWEHLQJEXUQHGFRPSOHWHO\DQG&2PD\EHSUHVHQW.HHSWKH
EORZHUGRRURQWKHIXUQDFHFORVHG8VHYHQWVRUIDQVZKHQWKH\DUHDYDLODEOHRQDOOIXHOEXUQLQJ
appliances. Make sure appliances are vented to the outside. Do not grill or barbecue indoors
or in garages or screen porches.
•&KHFNIRUH[KDXVWEDFNÀRZIURP&2VRXUFHV&KHFNWKHGUDIWKRRGRQDQRSHUDWLQJIXUQDFH
for a backdraft. Look for cracks on furnace heat exchangers.
•Check the house or garage on the other side of a shared wall.
•Keep windows and doors open slightly. If you suspect that CO is escaping into your home,
RSHQDZLQGRZRUDGRRU2SHQLQJZLQGRZVDQGGRRUVFDQVLJQL¿FDQWO\GHFUHDVH&2OHYHOV
Page 12
GAS
BLUE LED
AUDIBLE & VISUAL SIGNALS
POWER
GREEN LED
HORN
OPERATIONAL SUMMARY
CONDITION / RECOMMENDATION
Silent OffOn and Blinks
Off approx
every 20
seconds
Off Condition: AC power is present. DC power is present.
Recommendation: None
CO
RED LED
Silent
(alarmed
previously)
On and Blinks
Off approx
every 20
seconds
Off and Blinks
On approx.
every 5
seconds until
reset
Silent OffOff and Blinks
On approx
every 40
seconds
Off Condition: Alarm is powered by battery backup. AC Power is not
present.
Recommendation: Check the breaker or fuse box for power. If the breaker
or fuse box looks normal, call a licensed electrician for assistance.
4 Beeps,
5 second pause,
1 beep
Blinks On in
sync with
the 1 beep
Turns off
when the
3 beeps start
Blinks On in sync
with the cycle of
4 beeps and
turns off
Condition: The test/silence button has been pressed. The test sequence
lasts for approx. 7 seconds.
Recommendation: None
Off*See below OffHorn does not
sound when
other alarms
are active
or when
interconnected
alarm’s
test/reset
button is
pressed
4 Beeps,
5 second pause,
repeat
Off Blinks On in
sync with
4 beeps
Condition: Originating CO Alarm.
Recommendation:,IKD]DUGLVLGHQWL¿HGWDNHDOOSUHFDXWLRQVLIDQDODUP
sounds by calling an Emergency Service and getting out of the home.
4 Beeps,
5 second pause,
repeat
OffTurns off
when the
4 beeps start
Off Condition:1RQRULJLQDWLQJ&2$ODUP
Recommendation: An interconnected CO alarm has sensed CO, causing
DOOLQWHUFRQQHFWHGXQLWVWRVRXQG,IKD]DUGLVLGHQWL¿HGWDNHDOOSUHFDXWLRQV
if an alarm sounds by calling an Emergency Service and getting out of
the home.
Turns off
when the
4 beeps start
1 Beep,
2 second pause,
repeat
OffBlinks On
in sync
with the
1 beep
Condition: Originating GAS Alarm.
Recommendation:,IKD]DUGLVLGHQWL¿HGWDNHDOOSUHFDXWLRQVLIDQDODUP
sounds by calling an Emergency Service and getting out of the home.
1 Beep,
2 second pause,
repeat
OffTurns off
when the
1 beeps starts
Off Condition:1RQRULJLQDWLQJ*$6$ODUP
Recommendation: An interconnected GAS alarm has sensed GAS,
FDXVLQJDOOLQWHUFRQQHFWHGXQLWVWRVRXQG,IKD]DUGLV LGHQWL¿HG WDNH DOO
precautions if an alarm sounds by calling an Emergency Service and
getting out of the home.
Turns off
when the
1 beeps starts
Off or Blinks
On in
sync with
the 1 beep
Condition: Nuisance Alarm.
Recommendation: If there is no hazard present, verify the alarm is
mounted in the correct location (see User’s Manual). Reset alarm as
instructed below.
Horn sounds
when no
hazard is
present
Off or Blinks
On in sync
with 4 beeps
Turns off
when the
beeps start
4 Beeps,
5 second pause,
repeat
Blinks
On in sync
with 4 beeps
OffTurns off
when the
4 beeps start
Condition: CO alarm when cause of alarm is known and poses no threat.
Recommendation: The CO alarm Silence Feature can be activated by pressing
and releasing the Test/CO Silence button on the initiating alarm while in alarm
condition. The alarm will remain silent for approx. 5 minutes (with the red LED
blinking on approx. every 10 seconds), depending on the level of CO detected.
If CO levels drop below alarm levels, the alarm will remain silent and return to
normal operation. If CO levels remain constant or increase, this indicates a
potentially dangerous situation and the horn will sound again. Ventilate area.
Off and
Blinks On
approx.
every 5
seconds
until reset
Condition: One or more alarms not responding to interconnected alarm.
Recommendation: Press and hold the alarm Test/Silence button for at least
5 seconds. If still no alarm, turn off AC Power at the circuit breaker or fuse
box and disconnect the alarm from the mounting bracket and make sure
the connector plug is securely attached on units that did not alarm. If still no
alarm, have a licensed electrician make sure the yellow wire is not mistakenly
or accidentally connected to the white (neutral) wire.
Condition:3UHYLRXVDODUPFRQGLWLRQDWXQLGHQWL¿HGVRXUFH
Recommendation:48,&.),1'$ODUP2ULJLQDWLRQ,QDQLQWHUFRQQHFWHG
V\VWHPLWLVGLI¿FXOWWRGHWHUPLQHZKLFKDODUPLQLWLDWHGWKHDODUPVWRVRXQG
The QUICK FIND® feature will immediately allow you to locate the originating
alarm (once the alarms have stopped sounding). To initiate QUICK FIND®,
press and hold the test/silence button on any alarm until the test sequence
RQWKLVDODUPEHJLQV 5HOHDVH WKHWHVWEXWWRQ7KH VSHFL¿FKRUQSDWWHUQ
sequence is designated by the alarm type. Once this test sequence ends,
the originating alarm continues to sound for approximately 60 seconds.
Page 11
CO AND NATURAL GAS ALARM LIMITATIONS
Alarms have limitations. Like any other electronic device, CO and Natural Gas alarms are not
foolproof.
CO and Natural Gas alarms have a limited operational life. Your alarm must be tested weekly,
EHFDXVHLWFRXOGIDLOWRRSHUDWHDWDQ\WLPH,I\RXU$ODUPIDLOVWRWHVWSURSHUO\RULILWVVHOIGLDJQRVWLF
test reveals a malfunction, immediately have the unit replaced (see last page for warranty
information).
CO and Natural Gas alarms can only sense CO which reaches the alarm’s sensor. Carbon monoxide
may be present in other areas without reaching the alarm.
CO or gas could be present on one level of the home and not reach the alarm installed on a different
level. For example, CO or gas in the basement may not reach an alarm on the second level, near
the bedrooms. For this reason, we recommend you provide complete coverage by placing a CO
and Natural Gas alarm on every level of the home.
CO and Natural Gas alarms are not a substitute for property, disability, life or other insurance of
any kind. Appropriate coverage is your responsibility.
POTENTIAL SOURCES OF CO IN THE HOME
Fuel-burning appliances, such as;KHDWHUVJDVRUZRRGEXUQLQJ¿UHSODFHVJDVNLWFKHQUDQJHV
or cooktops, gas clothes dryers.
'DPDJHGRULQVXI¿FLHQWYHQWLQJVXFKDV corroded or disconnected water heaters, vent pipes,
OHDNLQJFKLPQH\VSLSHVRUÀXHVRUFUDFNHGKHDWH[FKDQJHUVEORFNHGRUFORJJHGFKLPQH\RSHQLQJV
Improper use of appliances/devices; operating a barbeque grill or vehicle in an enclosed area
(such as a garage or screened porch).
Transient CO Problems: ³WUDQVLHQW´RURQDJDLQRIIDJDLQ&2SUREOHPVFDQEHFDXVHGE\RXWGRRU
conditions and other special circumstances.
The following conditions can result in transient CO situations:
([FHVVLYHVSLOODJHRUUHYHUVHYHQWLQJRIIXHOEXUQLQJDSSOLDQFHVFDXVHGE\RXWGRRUDPELHQW
conditions, such as:
•Wind direction and/or velocity, including high gusts of wind. Heavy air in the vent pipes (cold/
humid air with extended periods between cycles).
•Negative pressure differential resulting from the use of exhaust fans.
•6LPXOWDQHRXVRSHUDWLRQRIVHYHUDOIXHOEXUQLQJDSSOLDQFHVFRPSHWLQJIRUOLPLWHGLQWHUQDODLU
•Vent pipe connections vibrating loose from clothes dryers, furnaces or water heaters.
•Obstructions in or unconventional vent pipe designs which can amplify the above situations.
([WHQGHGRSHUDWLRQRIXQYHQWHGIXHOEXUQLQJGHYLFHVUDQJHVRYHQV¿UHSODFHV
3. Temperature inversions which can trap exhaust close to the ground.
4. A car idling in an open or closed attached garage or near a home.
HOW CAN I PROTECT MY FAMILY FROM CO POISONING?
This alarm is an excellent means of protection. It monitors the air and sounds a loud alarm before
carbon monoxide levels become threatening to the average, healthy adult.
An alarm is not a substitute for proper maintenance of home appliances.
To help prevent CO problems and reduce the risk of CO poisoning:
•&OHDQFKLPQH\VDQGÀXHV\HDUO\.HHSWKHPIUHHRIGHEULVOHDYHVDQGQHVWVIRUSURSHUDLU
ÀRZ$OVRKDYHDSURIHVVLRQDO FKHFN IRU UXVW DQG FRUURVLRQ FUDFNV RU VHSDUDWLRQV7KHVH
FRQGLWLRQVFDQSUHYHQWSURSHUDLUPRYHPHQWDQGFDXVHEDFNGUDIWLQJ1HYHU³FDS´RUFRYHUD
FKLPQH\LQDQ\ZD\WKDWZRXOGEORFNDLUÀRZ
•7HVWDQGPDLQWDLQDOOIXHOEXUQLQJHTXLSPHQWDQQXDOO\0DQ\ORFDOJDVRURLOFRPSDQLHVDQG
HVAC companies offer appliance inspections for a nominal fee.
•0DNHUHJXODUYLVXDOLQVSHFWLRQVRIDOOIXHOEXUQLQJDSSOLDQFHV&KHFNDSSOLDQFHVIRUH[FHVVLYH
UXVWDQGVFDOLQJ$OVRFKHFNWKHÀDPHRQWKHEXUQHUDQGSLORWOLJKWV7KHÀDPHVKRXOGEHEOXH
$\HOORZÀDPHPHDQVIXHOLVQRWEHLQJEXUQHGFRPSOHWHO\DQG&2PD\EHSUHVHQW.HHSWKH
EORZHUGRRURQWKHIXUQDFHFORVHG8VHYHQWVRUIDQVZKHQWKH\DUHDYDLODEOHRQDOOIXHOEXUQLQJ
appliances. Make sure appliances are vented to the outside. Do not grill or barbecue indoors
or in garages or screen porches.
•&KHFNIRUH[KDXVWEDFNÀRZIURP&2VRXUFHV&KHFNWKHGUDIWKRRGRQDQRSHUDWLQJIXUQDFH
for a backdraft. Look for cracks on furnace heat exchangers.
•Check the house or garage on the other side of a shared wall.
•Keep windows and doors open slightly. If you suspect that CO is escaping into your home,
RSHQDZLQGRZRUDGRRU2SHQLQJZLQGRZVDQGGRRUVFDQVLJQL¿FDQWO\GHFUHDVH&2OHYHOV
Page 12
GAS
BLUE LED
AUDIBLE & VISUAL SIGNALS
POWER
GREEN LED
HORN
OPERATIONAL SUMMARY
CONDITION / RECOMMENDATION
Silent Off
On and Blinks
Off approx
every 20
seconds
Off Condition: AC power is present. DC power is present.
Recommendation: None
CO
RED LED
Silent
(alarmed
previously)
On and Blinks
Off approx
every 20
seconds
Off and Blinks
On approx.
every 5
seconds until
reset
Silent OffOff and Blinks
On approx
every 40
seconds
Off Condition: Alarm is powered by battery backup. AC Power is not
present.
Recommendation: Check the breaker or fuse box for power. If the breaker
or fuse box looks normal, call a licensed electrician for assistance.
4 Beeps,
5 second pause,
1 beep
Blinks On in
sync with
the 1 beep
Turns off
when the
3 beeps start
Blinks On in sync
with the cycle of
4 beeps and
turns off
Condition: The test/silence button has been pressed. The test sequence
lasts for approx. 7 seconds.
Recommendation: None
Off*See below OffHorn does not
sound when
other alarms
are active
or when
interconnected
alarm’s
test/reset
button is
pressed
4 Beeps,
5 second pause,
repeat
Off Blinks On in
sync with
4 beeps
Condition: Originating CO Alarm.
Recommendation:,IKD]DUGLVLGHQWL¿HGWDNHDOOSUHFDXWLRQVLIDQDODUP
sounds by calling an Emergency Service and getting out of the home.
4 Beeps,
5 second pause,
repeat
OffTurns off
when the
4 beeps start
Off Condition:1RQRULJLQDWLQJ&2$ODUP
Recommendation: An interconnected CO alarm has sensed CO, causing
DOOLQWHUFRQQHFWHGXQLWVWRVRXQG,IKD]DUGLVLGHQWL¿HGWDNHDOOSUHFDXWLRQV
if an alarm sounds by calling an Emergency Service and getting out of
the home.
Turns off
when the
4 beeps start
1 Beep,
2 second pause,
repeat
OffBlinks On
in sync
with the
1 beep
Condition: Originating GAS Alarm.
Recommendation:,IKD]DUGLVLGHQWL¿HGWDNHDOOSUHFDXWLRQVLIDQDODUP
sounds by calling an Emergency Service and getting out of the home.
1 Beep,
2 second pause,
repeat
OffTurns off
when the
1 beeps starts
Off Condition:1RQRULJLQDWLQJ*$6$ODUP
Recommendation: An interconnected GAS alarm has sensed GAS,
FDXVLQJDOOLQWHUFRQQHFWHGXQLWVWRVRXQG,IKD]DUGLV LGHQWL¿HG WDNH DOO
precautions if an alarm sounds by calling an Emergency Service and
getting out of the home.
Turns off
when the
1 beeps starts
Off or Blinks
On in
sync with
the 1 beep
Condition: Nuisance Alarm.
Recommendation: If there is no hazard present, verify the alarm is
mounted in the correct location (see User’s Manual). Reset alarm as
instructed below.
Horn sounds
when no
hazard is
present
Off or Blinks
On in sync
with 4 beeps
Turns off
when the
beeps start
4 Beeps,
5 second pause,
repeat
Blinks
On in sync
with 4 beeps
OffTurns off
when the
4 beeps start
Condition: CO alarm when cause of alarm is known and poses no threat.
Recommendation: The CO alarm Silence Feature can be activated by pressing
and releasing the Test/CO Silence button on the initiating alarm while in alarm
condition. The alarm will remain silent for approx. 5 minutes (with the red LED
blinking on approx. every 10 seconds), depending on the level of CO detected.
If CO levels drop below alarm levels, the alarm will remain silent and return to
normal operation. If CO levels remain constant or increase, this indicates a
potentially dangerous situation and the horn will sound again. Ventilate area.
Off and
Blinks On
approx.
every 5
seconds
until reset
Condition: One or more alarms not responding to interconnected alarm.
Recommendation: Press and hold the alarm Test/Silence button for at least
5 seconds. If still no alarm, turn off AC Power at the circuit breaker or fuse
box and disconnect the alarm from the mounting bracket and make sure
the connector plug is securely attached on units that did not alarm. If still no
alarm, have a licensed electrician make sure the yellow wire is not mistakenly
or accidentally connected to the white (neutral) wire.
Condition:3UHYLRXVDODUPFRQGLWLRQDWXQLGHQWL¿HGVRXUFH
Recommendation:48,&.),1'$ODUP2ULJLQDWLRQ,QDQLQWHUFRQQHFWHG
V\VWHPLWLVGLI¿FXOWWRGHWHUPLQHZKLFKDODUPLQLWLDWHGWKHDODUPVWRVRXQG
The QUICK FIND® feature will immediately allow you to locate the originating
alarm (once the alarms have stopped sounding). To initiate QUICK FIND®,
press and hold the test/silence button on any alarm until the test sequence
RQWKLVDODUPEHJLQV 5HOHDVH WKHWHVWEXWWRQ7KH VSHFL¿FKRUQSDWWHUQ
sequence is designated by the alarm type. Once this test sequence ends,
the originating alarm continues to sound for approximately 60 seconds.
Page 13
GAS
BLUE LED
AUDIBLE & VISUAL SIGNALS
POWER
GREEN LED
HORN
OPERATIONAL SUMMARY (continued)
CONDITION / RECOMMENDATION
CO
RED LED
Silent
(alarmed
previously)
Off and Blinks
On approx
every 5
seconds
until reset
On and Blinks
Off approx
every 20
seconds
Off and Blinks
On approx
every 5
seconds
until reset
Condition: Alarm needs to be reset due to abnormal operation/previous
alarms.
Recommendation: To reset the alarm, hold the Test/Silence button for 10
seconds or until the blue LED turns on. This will clear the alarm origination
and latching LEDs. Reset after each alarm event.
Horn has
stopped
sounding
OffOn and Blinks
Off approx
every 20
seconds
Condition: Latching CO LED indicator. The alarm has previously detected
CO and had alarmed.
Recommendation: Follow the reset instructions to remove the latching
LED.
Horn has
stopped
sounding
On and Blinks
Off approx
every 20
seconds
Off Condition: Latching GAS LED indicator. The alarm has previously detected
GAS and had alarmed.
Recommendation: Follow the reset instructions to remove the latching
LED.
1 Chirp
approx.
every 40
seconds
OffOn and Blinks
Off approx
every 20
seconds
Off Condition: Low battery.
Recommendation: Check to make sure a battery is present in the drawer,
the battery activation pull tab has been completely removed, battery polarity
is correct and the battery terminals are making contact with the smoke alarm
contacts in the battery drawer. If chirp continues, replace the 9V battery (see
User’s Manual for recommended battery types).
3 Chirps
approx.
every 20
seconds
OffOn and Blinks
Off approx
every 20
seconds
Off Condition:6HQVRU7URXEOH6HQVRU(QGRI/LIH$ODUP
Recommendation: Reset the alarm. If this does not clear the problem,
replace alarm.
2 Chirps
approx.
every 20
seconds
OffOn and Blinks
Off approx
every 20
seconds
Off Condition:3URGXFW(QGRI6HUYLFH/LIH1RWL¿FDWLRQ
Recommendation: 5HSODFH WKH DODUP LPPHGLDWHO\ 7KH SURGXFW HQGRI
VHUYLFHOLIHQRWL¿FDWLRQFDQEHWHPSRUDULO\VLOHQFHGIRUDKRXUSHULRGIRU
up to 20 days. After 20 days, the warning cannot be silenced. The alarm
should be replaced immediately.
* During 120 volt operation On and Blinks Off approx. every 20 seconds.
During 9 volt (DC backup) operation, blinks On approx. every 40 seconds.
Off and Blinks
On approx
every 5
seconds
until reset
Off and Blinks
On approx
every 5
seconds
until reset
RESET INSTRUCTIONS: Press the Test/Silence button for 10 seconds, or until the blue LED turns on, and then release. This will clear the alarm
latching LED’s and clear the alarm origination. Be sure to RESET alarms after each alarm event.
QUICK FIND®Alarm Origination/Location Feature: The QUICK FIND®feature will allow you to immediately locate the originating alarm (the alarm
that triggered the other alarms), once the alarms have stopped sounding.
3UHVVDQGKROGWKHWHVWVLOHQFHEXWWRQRQDQ\DODUPXQWLOWKHWHVWVHTXHQFHRQWKLVDODUPEHJLQV5HOHDVHWKHWHVWEXWWRQ7KHVSHFL¿FKRUQSDWWHUQ
sequence is designated by the alarm type.
2. Once this test sequence ends, the originating alarm continues to sound for approximately 60 seconds, which provides ample time to locate the
originating alarm.
3. Remember to reset the originating alarm in order to clear the QUICK FIND®and return the system to normal operation.
NOTE:,I\RXKDYHDQ\DGGLWLRQDOTXHVWLRQVDERXWWKHRSHUDWLRQRI\RXUDODUPSOHDVHFRQWDFWRXU&XVWRPHU6HUYLFH'HSDUWPHQWDW
and we will gladly assist you.
Page 12
GAS
BLUE LED
AUDIBLE & VISUAL SIGNALS
POWER
GREEN LED
HORN
OPERATIONAL SUMMARY
CONDITION / RECOMMENDATION
Silent OffOn and Blinks
Off approx
every 20
seconds
Off Condition: AC power is present. DC power is present.
Recommendation: None
CO
RED LED
Silent
(alarmed
previously)
On and Blinks
Off approx
every 20
seconds
Off and Blinks
On approx.
every 5
seconds until
reset
Silent OffOff and Blinks
On approx
every 40
seconds
Off Condition: Alarm is powered by battery backup. AC Power is not
present.
Recommendation: Check the breaker or fuse box for power. If the breaker
or fuse box looks normal, call a licensed electrician for assistance.
4 Beeps,
5 second pause,
1 beep
Blinks On in
sync with
the 1 beep
Turns off
when the
3 beeps start
Blinks On in sync
with the cycle of
4 beeps and
turns off
Condition: The test/silence button has been pressed. The test sequence
lasts for approx. 7 seconds.
Recommendation: None
Off*See below OffHorn does not
sound when
other alarms
are active
or when
interconnected
alarm’s
test/reset
button is
pressed
4 Beeps,
5 second pause,
repeat
Off Blinks On in
sync with
4 beeps
Condition: Originating CO Alarm.
Recommendation:,IKD]DUGLVLGHQWL¿HGWDNHDOOSUHFDXWLRQVLIDQDODUP
sounds by calling an Emergency Service and getting out of the home.
4 Beeps,
5 second pause,
repeat
OffTurns off
when the
4 beeps start
Off Condition:1RQRULJLQDWLQJ&2$ODUP
Recommendation: An interconnected CO alarm has sensed CO, causing
DOOLQWHUFRQQHFWHGXQLWVWRVRXQG,IKD]DUGLVLGHQWL¿HGWDNHDOOSUHFDXWLRQV
if an alarm sounds by calling an Emergency Service and getting out of
the home.
Turns off
when the
4 beeps start
1 Beep,
2 second pause,
repeat
OffBlinks On
in sync
with the
1 beep
Condition: Originating GAS Alarm.
Recommendation:,IKD]DUGLVLGHQWL¿HGWDNHDOOSUHFDXWLRQVLIDQDODUP
sounds by calling an Emergency Service and getting out of the home.
1 Beep,
2 second pause,
repeat
OffTurns off
when the
1 beeps starts
Off Condition:1RQRULJLQDWLQJ*$6$ODUP
Recommendation: An interconnected GAS alarm has sensed GAS,
FDXVLQJDOOLQWHUFRQQHFWHGXQLWVWRVRXQG,IKD]DUGLV LGHQWL¿HG WDNH DOO
precautions if an alarm sounds by calling an Emergency Service and
getting out of the home.
Turns off
when the
1 beeps starts
Off or Blinks
On in
sync with
the 1 beep
Condition: Nuisance Alarm.
Recommendation: If there is no hazard present, verify the alarm is
mounted in the correct location (see User’s Manual). Reset alarm as
instructed below.
Horn sounds
when no
hazard is
present
Off or Blinks
On in sync
with 4 beeps
Turns off
when the
beeps start
4 Beeps,
5 second pause,
repeat
Blinks
On in sync
with 4 beeps
OffTurns off
when the
4 beeps start
Condition: CO alarm when cause of alarm is known and poses no threat.
Recommendation: The CO alarm Silence Feature can be activated by pressing
and releasing the Test/CO Silence button on the initiating alarm while in alarm
condition. The alarm will remain silent for approx. 5 minutes (with the red LED
blinking on approx. every 10 seconds), depending on the level of CO detected.
If CO levels drop below alarm levels, the alarm will remain silent and return to
normal operation. If CO levels remain constant or increase, this indicates a
potentially dangerous situation and the horn will sound again. Ventilate area.
Off and
Blinks On
approx.
every 5
seconds
until reset
Condition: One or more alarms not responding to interconnected alarm.
Recommendation: Press and hold the alarm Test/Silence button for at least
5 seconds. If still no alarm, turn off AC Power at the circuit breaker or fuse
box and disconnect the alarm from the mounting bracket and make sure
the connector plug is securely attached on units that did not alarm. If still no
alarm, have a licensed electrician make sure the yellow wire is not mistakenly
or accidentally connected to the white (neutral) wire.
Condition:3UHYLRXVDODUPFRQGLWLRQDWXQLGHQWL¿HGVRXUFH
Recommendation:48,&.),1'$ODUP2ULJLQDWLRQ,QDQLQWHUFRQQHFWHG
V\VWHPLWLVGLI¿FXOWWRGHWHUPLQHZKLFKDODUPLQLWLDWHGWKHDODUPVWRVRXQG
The QUICK FIND® feature will immediately allow you to locate the originating
alarm (once the alarms have stopped sounding). To initiate QUICK FIND®,
press and hold the test/silence button on any alarm until the test sequence
RQWKLVDODUPEHJLQV 5HOHDVH WKHWHVWEXWWRQ7KH VSHFL¿FKRUQSDWWHUQ
sequence is designated by the alarm type. Once this test sequence ends,
the originating alarm continues to sound for approximately 60 seconds.
Page 13
GAS
BLUE LED
AUDIBLE & VISUAL SIGNALS
POWER
GREEN LED
HORN
OPERATIONAL SUMMARY (continued)
CONDITION / RECOMMENDATION
CO
RED LED
Silent
(alarmed
previously)
Off and Blinks
On approx
every 5
seconds
until reset
On and Blinks
Off approx
every 20
seconds
Off and Blinks
On approx
every 5
seconds
until reset
Condition: Alarm needs to be reset due to abnormal operation/previous
alarms.
Recommendation: To reset the alarm, hold the Test/Silence button for 10
seconds or until the blue LED turns on. This will clear the alarm origination
and latching LEDs. Reset after each alarm event.
Horn has
stopped
sounding
OffOn and Blinks
Off approx
every 20
seconds
Condition: Latching CO LED indicator. The alarm has previously detected
CO and had alarmed.
Recommendation: Follow the reset instructions to remove the latching
LED.
Horn has
stopped
sounding
On and Blinks
Off approx
every 20
seconds
Off Condition: Latching GAS LED indicator. The alarm has previously detected
GAS and had alarmed.
Recommendation: Follow the reset instructions to remove the latching
LED.
1 Chirp
approx.
every 40
seconds
OffOn and Blinks
Off approx
every 20
seconds
Off Condition: Low battery.
Recommendation: Check to make sure a battery is present in the drawer,
the battery activation pull tab has been completely removed, battery polarity
is correct and the battery terminals are making contact with the smoke alarm
contacts in the battery drawer. If chirp continues, replace the 9V battery (see
User’s Manual for recommended battery types).
3 Chirps
approx.
every 20
seconds
OffOn and Blinks
Off approx
every 20
seconds
Off Condition:6HQVRU7URXEOH6HQVRU(QGRI/LIH$ODUP
Recommendation: Reset the alarm. If this does not clear the problem,
replace alarm.
2 Chirps
approx.
every 20
seconds
OffOn and Blinks
Off approx
every 20
seconds
Off Condition:3URGXFW(QGRI6HUYLFH/LIH1RWL¿FDWLRQ
Recommendation: 5HSODFH WKH DODUP LPPHGLDWHO\ 7KH SURGXFW HQGRI
VHUYLFHOLIHQRWL¿FDWLRQFDQEHWHPSRUDULO\VLOHQFHGIRUDKRXUSHULRGIRU
up to 20 days. After 20 days, the warning cannot be silenced. The alarm
should be replaced immediately.
* During 120 volt operation On and Blinks Off approx. every 20 seconds.
During 9 volt (DC backup) operation, blinks On approx. every 40 seconds.
Off and Blinks
On approx
every 5
seconds
until reset
Off and Blinks
On approx
every 5
seconds
until reset
RESET INSTRUCTIONS: Press the Test/Silence button for 10 seconds, or until the blue LED turns on, and then release. This will clear the alarm
latching LED’s and clear the alarm origination. Be sure to RESET alarms after each alarm event.
QUICK FIND®Alarm Origination/Location Feature: The QUICK FIND®feature will allow you to immediately locate the originating alarm (the alarm
that triggered the other alarms), once the alarms have stopped sounding.
3UHVVDQGKROGWKHWHVWVLOHQFHEXWWRQRQDQ\DODUPXQWLOWKHWHVWVHTXHQFHRQWKLVDODUPEHJLQV5HOHDVHWKHWHVWEXWWRQ7KHVSHFL¿FKRUQSDWWHUQ
sequence is designated by the alarm type.
2. Once this test sequence ends, the originating alarm continues to sound for approximately 60 seconds, which provides ample time to locate the
originating alarm.
3. Remember to reset the originating alarm in order to clear the QUICK FIND®and return the system to normal operation.
NOTE:,I\RXKDYHDQ\DGGLWLRQDOTXHVWLRQVDERXWWKHRSHUDWLRQRI\RXUDODUPSOHDVHFRQWDFWRXU&XVWRPHU6HUYLFH'HSDUWPHQWDW
and we will gladly assist you.
288-3508-07
©2012 UNIVERSAL SECURITY INSTRUMENTS, INC., Rev. 07/2016 CD
Printed in China
SEVEN-YEAR LIMITED WARRANTY
MODELS MCN108 and MCN108L
86,(OHFWULF,QF8QLYHUVDO6HFXULW\,QVWUXPHQWV,QF³86,´ZDUUDQWVWKLVSURGXFWWREHIUHHIURP
defects in material and workmanship for a period of seven (7) years from the date of purchase.
This warranty shall not apply to any batteries used in the product or to any damage which may be
caused by such batteries. This warranty applies only to the original consumer purchaser and only
to products used in normal residential use and service. If this product is found to be defective,
USI’s only obligation, and your exclusive remedy, is the repair or replacement of the product, at
USI’s discretion, provided the product has not been damaged through misuse, abuse, accident,
PRGL¿FDWLRQVDOWHUDWLRQQHJOHFWRUPLVKDQGOLQJ7KLV:DUUDQW\VKDOOQRWDSSO\WRDQ\SURGXFWZKLFK
LVIRXQGWRKDYHEHHQLPSURSHUO\LQVWDOOHGVHWXSRUXVHGLQDQ\ZD\QRWLQDFFRUGDQFHZLWKWKH
instructions supplied with the product.
ALARM RETURNS
For replacement of this alarm under the terms of this Warranty, contact Customer Service at
'HSDUWPHQWDWH[WHQVLRQWRREWDLQWKHFXUUHQWSRVWDJHDQGKDQGOLQJIHHV86,
GRHVQRWZDUUDQWDQGVSHFL¿FDOO\GLVFODLPVDQ\ZDUUDQW\ZKHWKHUH[SUHVVRULPSOLHGRI¿WQHVVIRU
a particular purpose, other than the warranty contained herein. No implied warranty on this product,
created by state law, shall extend beyond the term of this warranty unless such law otherwise
SURYLGHV86,VSHFL¿FDOO\GLVFODLPVDQ\OLDELOLW\DQGVKDOOQRWEHOLDEOHIRUDQ\FRQVHTXHQWLDORU
incidental loss or damage, including, but not limited to, damages to any equipment with which this
product is used. Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. No agent, representative,
dealer, or employee of the company has the authority to increase or alter the obligations or terms
RIWKLV:DUUDQW\7KLV:DUUDQW\JLYHV\RXVSHFL¿FOHJDOULJKWVDQG\RXPD\DOVRKDYHRWKHUULJKWV
which vary from state to state. This Warranty is only valid for merchandise purchased from outlets
LQWKH8QLWHG6WDWHVDQG&DQDGD7KLVZDUUDQW\H[SLUHVXSRQSURGXFWHQGRIVHUYLFHOLIHVLJQDOO
LITHIUM BATTERY LIMITED WARRANTY
7KH8OWUDOLIHEDWWHU\PRGHOV89/-DQG89/-3DUHZDUUDQWHGE\8OWUDOLIH&RUSRUDWLRQLQWKLV
alarm ONLY and are not warranted in any other device. Submit your warranty claim through the
8OWUDOLIHZHEVLWHZZZXOWUDOLIHFRUSFRPRUFDOO
11407 Cronhill Drive, Suite A
Owings Mills, Maryland 21117 USA
Visit Us on the Web! www.USI Electric.com
Table of Contents:
Page #
What You Should Know About CO .........................................................2
What You Should Know About Natural Gas............................................2
Recommended Location of Alarms.........................................................2
Basic Safety Information.........................................................................3
Where Alarm Should Not Be Installed ....................................................4
Installation Instructions...........................................................................5
Electrical Shock Hazard .........................................................................5
Locking / Tamper Feature.......................................................................5
Wiring Instructions..............................................................................5, 6
Operation, Testing & Maintenance .........................................................7
QUICK FIND®Alarm Originating Feature & Reset .................................8
What To Do If The Alarm Sounds ...........................................................8
CO Alarm Silence Feature......................................................................9
Testing & Maintenance .....................................................................9, 10
Battery Backup Replacement...............................................................10
CO & Natural Gas Alarm Limitations .................................................... 11
Operational Summary.....................................................................12, 13
Warranty ................................................................................ Back Cover
MODEL MCN108, MCN108L
CARBON MONOXIDE ALARM AND
NATURAL GAS ALARM
WITH SILENCE FEATURE
THANK YOU for purchasing this combination alarm. This manual includes important information
regarding where to install the alarm, how to operate, maintenance, testing and product features. It
also includes tips and information which could help protect you and your family.
PLEASE READ AND SAVE!
Page 13
GAS
BLUE LED
AUDIBLE & VISUAL SIGNALS
POWER
GREEN LED
HORN
OPERATIONAL SUMMARY (continued)
CONDITION / RECOMMENDATION
CO
RED LED
Silent
(alarmed
previously)
Off and Blinks
On approx
every 5
seconds
until reset
On and Blinks
Off approx
every 20
seconds
Off and Blinks
On approx
every 5
seconds
until reset
Condition: Alarm needs to be reset due to abnormal operation/previous
alarms.
Recommendation: To reset the alarm, hold the Test/Silence button for 10
seconds or until the blue LED turns on. This will clear the alarm origination
and latching LEDs. Reset after each alarm event.
Horn has
stopped
sounding
OffOn and Blinks
Off approx
every 20
seconds
Condition: Latching CO LED indicator. The alarm has previously detected
CO and had alarmed.
Recommendation: Follow the reset instructions to remove the latching
LED.
Horn has
stopped
sounding
On and Blinks
Off approx
every 20
seconds
Off Condition: Latching GAS LED indicator. The alarm has previously detected
GAS and had alarmed.
Recommendation: Follow the reset instructions to remove the latching
LED.
1 Chirp
approx.
every 40
seconds
OffOn and Blinks
Off approx
every 20
seconds
Off Condition: Low battery.
Recommendation: Check to make sure a battery is present in the drawer,
the battery activation pull tab has been completely removed, battery polarity
is correct and the battery terminals are making contact with the smoke alarm
contacts in the battery drawer. If chirp continues, replace the 9V battery (see
User’s Manual for recommended battery types).
3 Chirps
approx.
every 20
seconds
OffOn and Blinks
Off approx
every 20
seconds
Off Condition:6HQVRU7URXEOH6HQVRU(QGRI/LIH$ODUP
Recommendation: Reset the alarm. If this does not clear the problem,
replace alarm.
2 Chirps
approx.
every 20
seconds
OffOn and Blinks
Off approx
every 20
seconds
Off Condition:3URGXFW(QGRI6HUYLFH/LIH1RWL¿FDWLRQ
Recommendation: 5HSODFH WKH DODUP LPPHGLDWHO\ 7KH SURGXFW HQGRI
VHUYLFHOLIHQRWL¿FDWLRQFDQEHWHPSRUDULO\VLOHQFHGIRUDKRXUSHULRGIRU
up to 20 days. After 20 days, the warning cannot be silenced. The alarm
should be replaced immediately.
* During 120 volt operation On and Blinks Off approx. every 20 seconds.
During 9 volt (DC backup) operation, blinks On approx. every 40 seconds.
Off and Blinks
On approx
every 5
seconds
until reset
Off and Blinks
On approx
every 5
seconds
until reset
RESET INSTRUCTIONS: Press the Test/Silence button for 10 seconds, or until the blue LED turns on, and then release. This will clear the alarm
latching LED’s and clear the alarm origination. Be sure to RESET alarms after each alarm event.
QUICK FIND®Alarm Origination/Location Feature: The QUICK FIND®feature will allow you to immediately locate the originating alarm (the alarm
that triggered the other alarms), once the alarms have stopped sounding.
3UHVVDQGKROGWKHWHVWVLOHQFHEXWWRQRQDQ\DODUPXQWLOWKHWHVWVHTXHQFHRQWKLVDODUPEHJLQV5HOHDVHWKHWHVWEXWWRQ7KHVSHFL¿FKRUQSDWWHUQ
sequence is designated by the alarm type.
2. Once this test sequence ends, the originating alarm continues to sound for approximately 60 seconds, which provides ample time to locate the
originating alarm.
3. Remember to reset the originating alarm in order to clear the QUICK FIND®and return the system to normal operation.
NOTE:,I\RXKDYHDQ\DGGLWLRQDOTXHVWLRQVDERXWWKHRSHUDWLRQRI\RXUDODUPSOHDVHFRQWDFWRXU&XVWRPHU6HUYLFH'HSDUWPHQWDW
and we will gladly assist you.
288-3508-07
©2012 UNIVERSAL SECURITY INSTRUMENTS, INC., Rev. 07/2016 CD
Printed in China
SEVEN-YEAR LIMITED WARRANTY
MODELS MCN108 and MCN108L
86,(OHFWULF,QF8QLYHUVDO6HFXULW\,QVWUXPHQWV,QF³86,´ZDUUDQWVWKLVSURGXFWWREHIUHHIURP
defects in material and workmanship for a period of seven (7) years from the date of purchase.
This warranty shall not apply to any batteries used in the product or to any damage which may be
caused by such batteries. This warranty applies only to the original consumer purchaser and only
to products used in normal residential use and service. If this product is found to be defective,
USI’s only obligation, and your exclusive remedy, is the repair or replacement of the product, at
USI’s discretion, provided the product has not been damaged through misuse, abuse, accident,
PRGL¿FDWLRQVDOWHUDWLRQQHJOHFWRUPLVKDQGOLQJ7KLV:DUUDQW\VKDOOQRWDSSO\WRDQ\SURGXFWZKLFK
LVIRXQGWRKDYHEHHQLPSURSHUO\LQVWDOOHGVHWXSRUXVHGLQDQ\ZD\QRWLQDFFRUGDQFHZLWKWKH
instructions supplied with the product.
ALARM RETURNS
For replacement of this alarm under the terms of this Warranty, contact Customer Service at
'HSDUWPHQWDWH[WHQVLRQWRREWDLQWKHFXUUHQWSRVWDJHDQGKDQGOLQJIHHV86,
GRHVQRWZDUUDQWDQGVSHFL¿FDOO\GLVFODLPVDQ\ZDUUDQW\ZKHWKHUH[SUHVVRULPSOLHGRI¿WQHVVIRU
a particular purpose, other than the warranty contained herein. No implied warranty on this product,
created by state law, shall extend beyond the term of this warranty unless such law otherwise
SURYLGHV86,VSHFL¿FDOO\GLVFODLPVDQ\OLDELOLW\DQGVKDOOQRWEHOLDEOHIRUDQ\FRQVHTXHQWLDORU
incidental loss or damage, including, but not limited to, damages to any equipment with which this
product is used. Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. No agent, representative,
dealer, or employee of the company has the authority to increase or alter the obligations or terms
RIWKLV:DUUDQW\7KLV:DUUDQW\JLYHV\RXVSHFL¿FOHJDOULJKWVDQG\RXPD\DOVRKDYHRWKHUULJKWV
which vary from state to state. This Warranty is only valid for merchandise purchased from outlets
LQWKH8QLWHG6WDWHVDQG&DQDGD7KLVZDUUDQW\H[SLUHVXSRQSURGXFWHQGRIVHUYLFHOLIHVLJQDOO
LITHIUM BATTERY LIMITED WARRANTY
7KH8OWUDOLIHEDWWHU\PRGHOV89/-DQG89/-3DUHZDUUDQWHGE\8OWUDOLIH&RUSRUDWLRQLQWKLV
alarm ONLY and are not warranted in any other device. Submit your warranty claim through the
8OWUDOLIHZHEVLWHZZZXOWUDOLIHFRUSFRPRUFDOO
11407 Cronhill Drive, Suite A
Owings Mills, Maryland 21117 USA
Visit Us on the Web! www.USI Electric.com
This manual suits for next models
1
Table of contents
Other usi Security System manuals
