USP Duramax Foundation Kit Assembly instructions

ALL PURPOSE VINYL STORAGE SHEDS
A Product of
USP
US POLYMERS INC
USP
Instructions for Assembly
Size 4’ x 8’
Foundation Kit
TM
TOOLS YOU WILL NEED
• Cordless Drill - Philips Head

1
1. Assemble the channel (F04C) & (F05C) together
using 4 screws. Make 2 sets.
F04C
F05C
2. Make a frame with the sub assemblies as shown below.
Make sure while assembling, the
channel position should be as
shown.
Note
Channel Position
F04C
FRONT SIDE
F05C
F04C
F05C
F01C
F01C
‘U’ CHANNEL
Note: Check all parts prior to installation.
CODE DESCRIPTION QTY
F01C FOUNDATION ‘U’ CHANNEL 6
F02C FOUNDATION ‘U’ CHANNEL 3
F03 FOUNDATION ‘L’ ANGLE 4
F04C FOUNDATION ‘U’ CHANNEL 2
F05C FOUNDATION ‘U’ CHANNEL 2
ACCESSORIES
CODE DESCRIPTION QTY
S1 DIA. 4.2 x 16mm. (5/32” x 5/8”)
SHEET METAL SCREW 52
Parts List
‘L’ ANGLE

3. Fix the L-angle (F03) to the channel at all the four corners to
make a perfect frame. See Fig.
2
F03
F03
F03
F03
4. Fix the channel (F01C) into the main frame as shown.
See Fig.
Make sure while assembling, the
channel position should be as
shown.
Note
F01C
5. Fix the channel (F02C) into the frame with screws as shown.
See Fig.
F02C
F01C
F01C
F01C
F02C
F02C

3
6. Assemble the U-Channel bases on top of the foundation as
shown in Figure.
7a. After completing the assembly of shed place exterior grade
CDX 3/4” (19mm) plywood inside the foundation. See fig.
F01C
F05C
B21
F04C
FRONT SIDE
OR 7b. After completing the assembly of the base U-channel
fill the concrete upto the foundation top surface.
916mm
1148mm
F04C
F01C
F05C
B21
B22
B1C
B21
B22
B3C
B4C
B1C
916mm 500mm