UTE UH2-88A User manual

www.ute.de
UH2-88A
8x8 HDMI 2.0 Matrix with Audio Matrix/
Downscaling/ AOC Supported
All Rights Reserved
Version: UH2-88A_2019V1.2
User Manual

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG www.ute.de

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG www.ute.de
Preface
Read this user manual carefully before using the product. Pictures shown in this manual
are for reference only. Different models and specifications are subject to real product.
This manual is only for operation instruction, please contact the local distributor for
maintenance assistance. The functions described in this version were updated till
September, 2019. In the constant effort to improve the product, we reserve the right to
make functions or parameters changes without notice or obligation. Please refer to the
dealers for the latest details.
All product function is valid till 2019-09-01.
Trademarks
Product model and logo are trademarks of U.T.E. electronic GmbH & Co. KG.
Any other trademarks mentioned in this manual are acknowledged as the properties of
the trademark owner. No part of this publication may be copied or reproduced without
the prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG www.ute.de

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG www.ute.de
SAFETY PRECAUTIONS
To ensure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
⚫Unpack the equipment carefully and save the original box and packing material for
possible future shipment
⚫Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
⚫Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
⚫Using supplies or parts not meeting the products’ specifications may cause damage,
deterioration or malfunction.
⚫Refer all servicing to qualified service personnel.
⚫To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
⚫Do not put any heavy items on the extension cable in case of extrusion.
⚫Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
⚫Install the device in a place with fine ventilation to avoid damage caused by
overheat.
⚫Keep the module away from liquids.
⚫Spillage into the housing may result in fire, electrical shock, or equipment damage. If
an object or liquid falls or spills on to the housing, unplug the module immediately.
⚫Do not twist or pull by force ends of the optical cable. It can cause malfunction.
⚫Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
⚫Unplug the power cord when left unused for a long period of time.
⚫Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG www.ute.de
Table of Contents
1. Introduction.................................................................................................................1
1.1 Introduction to 8x8 HDMI 2.0 Matrix UH2-88A...................................................1
1.2 Features ............................................................................................................1
1.3 Package List......................................................................................................2
2. Panel Description........................................................................................................3
2.1 Front Panel........................................................................................................3
2.2 Rear Panel.........................................................................................................4
3. System Connection.....................................................................................................5
3.1 Usage Precaution..............................................................................................5
3.2 System Diagram UH2-88A................................................................................5
4. Panel Button Control...................................................................................................6
4.1 I/O Connection Switching ..................................................................................6
4.2 I/O Connection Inquiry.......................................................................................6
4.3 LOCK Function..................................................................................................6
4.4 PRESET RECALL Function...............................................................................7
4.5 CLEAR Button...................................................................................................7
5. IR Remote Control......................................................................................................8
6. GUI Control.................................................................................................................9
6.1 Switching Tab ..................................................................................................10
6.2 Audio Tab.........................................................................................................11
6.2.1 Audio Setting .........................................................................................11
6.2.2 Audio Volume.........................................................................................12
6.3 Configuration Tab ............................................................................................12
6.3.1 EDID Copy.............................................................................................12
6.3.2 EDID Setting..........................................................................................13
6.4 CEC Tab..........................................................................................................14
6.4.1 Input Source Device Control..................................................................14
6.4.2 Output Display Device Control...............................................................15
6.5 RS232 Tab.......................................................................................................16
6.6 Interface Tab....................................................................................................17

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG www.ute.de
6.7 Network Tab.....................................................................................................18
6.8 Access Tab ......................................................................................................18
6.9 GUI Upgrade ...................................................................................................19
7. RS232 Control..........................................................................................................20
7.1 RS232 Control Software..................................................................................20
7.2 Basic Settings..................................................................................................20
7.3 RS232 Communication Commands ................................................................22
7.3.1 System Commands...............................................................................22
7.3.2 Control Management.............................................................................23
7.3.3 Query Commands .................................................................................25
7.3.4 Lock/unlock Commands ........................................................................27
7.3.5 Audio Commands..................................................................................28
7.3.6 HDCP Compliance ................................................................................29
7.3.7 EDID Management................................................................................30
7.3.8 CEC Control ..........................................................................................33
7.3.8.1. Control the input source:....................................................34
7.3.8.2. Control the output display device: ......................................35
8. Firmware Upgrade....................................................................................................36
9. Specification .............................................................................................................37
9.1 Video Resolution Down-scaling:......................................................................39
10. Troubleshooting and Maintenance..........................................................................40
11. Customer Service....................................................................................................41

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG 1 www.ute.de
1. Introduction
1.1 Introduction to 8x8 HDMI 2.0 Matrix UH2-88A
The UH2-88A is a professional 8x8 HDMI 2.0 Matrix Switcher with Audio Matrix. It
includes 8 HDMI inputs, 8 HDMI outputs and the last four outputs with down-scaling
function, which is designed for switching four HDMI2.0 and HDCP2.3 compliant signals.
It also features 8 SPDIF and 8 analog audio outputs for audio matrix.
The matrix switcher features comprehensive EDID management and advanced HDCP
handing to ensure maximum functionality with a wide range of video sources.
The matrix switcher not only supports bi-directional IR, RS232 extension but also has IR,
RS232, and TCP/IP control options.
1.2 Features
⚫8x8 HDMI 2.0 Matrix Switcher.
⚫Supports 4K/60 4:4:4, HDR, HDCP2.3 compliant.
⚫Audio Matrix, audio out can be de-embedded from arbitrary input or output.
⚫Individual volume adjustment on each L+R output.
⚫Supports 4K to 1080p down-scaling up to 4 outputs.
⚫HDMI out provides 2.5W to powerActive Optical Cable (AOC).
⚫HDMI Output support up to 5V500mAfor AOC cable
⚫Controllable by front panel, IR, RS232 and TCP/IP.

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG 2 www.ute.de
1.3 Package List
⚫1x UH2-88A: 8x8 HDMI 2.0 Matrix Switcher
⚫6x Screws
⚫1x RS232 cable (3-pin to DB9)
⚫1x IR remote
⚫1x User manual
⚫2x Mounting ears
⚫4x Plastic cushions
⚫1x IR receiver
⚫1x Power adaptor (DC 24V 2.71A)
Notes:
•Please confirm if the product and the accessories are all included, if not, please
contact with the dealers.
•Please contact your dealer immediately if any damage or defect in the in the
components is found.

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG 3 www.ute.de
2. Panel Description
2.1 Front Panel
Figure 2- 1 UH2-88A Front Panel
No.
Name
Description
①
Power Indicator
⚫Illuminates green when device powered on;
⚫Turns red in standby mode.
②
IR sensor
Built-in IR sensor, receives IR signal sent from
IR remote.
③
INPUT selector button
OUTPUT selector
button
⚫Total 8 input selector buttons, press one of
buttons to switch input source.
⚫Total 8 output selector buttons, press the
buttons to select output channel.
④
ENTER button
Confirm operation.
LOCK button
Press this button for 3 seconds to lock/unlock all
front buttons.
ALL button
Select all outputs to convert an input to all outputs:
→Press INPUTS 1 + ALL + ENTER
CLEAR button
Withdraw button.
⑤
PRESET RECALL
HOLD TO STORE
⚫Press and hold the button 1~4 to save the
current switching status to the corresponding
preset 1~4.
⚫Press the button 1~4 to recall the saved preset
1~4.
Note: Pictures shown in this manual are only for reference.

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG 4 www.ute.de
2.2 Rear Panel
Figure 2- 2 UH2-88A Rear Panel
No.
Name
Description
①
INPUTS
HDMI input ports, 8 in total, connects with HDMI
sources.
②
OUTPUTS
8 in total, connects with HDMI displays. The latter four
HDMI ports have down-scaling function.
③
AUDIO MATRIX
OUTPUTS
SPDIF: Audio output ports for de-embedded HDMI
audio, 8 in total.
L&R (RCA): Audio output ports for de-embedded
HDMI audio, 8 pairs in total.
④
IR EYE
Connects with external IR receiver for using the IR
remote to control the Matrix Switcher.
⑤
RS232
3-pin terminal block to connect the RS232 control
device (e.g. PC) or a device to be controlled by
RS232 commands.
⑥
FIREWARE
USB-A port for updating firmware.
⑦
TCP/IP
RJ45 port to connect the control device (e.g. PC) to
control the matrix by GUI.
⑧
DC 24V
Connect with 24VDC 2.71A power adaptor.
Note: When connecting to 4K sources, make sure the HDMI cable is compliant
with HDMI2.0 to ensure reliable transmission.
Note: Pictures shown in this manual are only for reference.
12
345
8
7
6

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG 5 www.ute.de
3. System Connection
3.1 Usage Precaution
⚫Make sure all components and accessories included before installation.
⚫System should be installed in a clean environment with proper temperature and
humidity.
⚫All of the power switches, plugs, sockets, and power cords should be insulated and
safe.
⚫All devices should be connected before power on.
3.2 System Diagram UH2-88A
The following figure shows a typical application that can be realized with
8x8 HDMI 2.0 Matrix Switcher UH2-88A:
Figure 3- 1 Connection and System Diagram
Note: When connecting to 4K sources, make sure the HDMI cable is compliant
with HDMI2.0 to ensure reliable transmission.
Note: Pictures shown in this manual are for reference only, different model and
specifications are subject to real product
Tx Rx
L RSPDI F L RSPDIF L RSPDIF L RSPDIF L RSPDIF L RSPDIF L RSPDI F
DC 24VFW TCP/IP1 2 3 6 7 8 1 42 3 5 6 7 84 5
1 2 3 4 5 6 7 8
DOWN-SCALING
RS232IR EYEL RSPDI F
AUDIO MATRIX OUTPUTS
INPU TS OUTPUTS
HDMI:
IR Control:
RS232:
Ethernet:
Audio:
Laptop
Blue-Ray
Game Console
4K TV
4K
TV
Down-Scaling
Laptop
Soundbar Amplifier Central Control System
IR
Receiver
Router Laptop
Remote

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG 6 www.ute.de
4. Panel Button Control
4.1 I/O Connection Switching
The front panel features eight input selection buttons and eight output selection buttons
for switching I/O connection.
1) To convert 1 input to 1 output:
Example: Input 1 to Output 3
→ Press INPUTS 1 + OUTPUTS 3 + ENTER button.
2) To convert 1 input to 2~7 outputs:
Example: Input 1 to Output 3, Output 6, Output 7.
→ Press INPUTS 1 + OUTPUTS 3, Output 6, Output 7 +ENTER button.
3) To convert 1 input to 8 outputs:
Example: Convert Input 2 to all outputs
→ Press INPUTS 2 +ALL button +ENTER button.
Note: Indicators of the pressed buttons will blink blue for three times if the
conversion is done, then it will be off. If the conversion failed, they will be off
immediately.
4.2 I/O Connection Inquiry
Press OUTPUTS button 1, 2, 3, 4,5,6,7 or 8 to inquiry its corresponding input, and then
the indicator of the input button will turn blue.
4.3 LOCK Function
Long press the LOCK button for three seconds, all buttons on the front panel disable to
work. And then long press the LOCK button for three seconds again or unlock on GUI
control, the front panel button will unlock.

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG 7 www.ute.de
4.4 PRESET RECALL Function
Press and hold the PRESET 1~4 at least three seconds to save the current switching
status to the corresponding preset 1~4.
Press the PRESET 1~4 to recall the saved preset 1~4.
Note: The matrix switcher supports six presets, but only preset 1~4 can be saved
and recalled by button control. Please manage other preset by GUI control or
RS232 control.
4.5 CLEAR Button
Please press the CLEAR button if want to withdraw an operation before the ENTER
button comes into effect, meanwhile, the matrix will return to the previous status.

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG 8 www.ute.de
5. IR Remote Control
The Matrix Switcher features one built-in IR receiver to receive IR signal from IR remote
to enable IR control. If the external IR receiver or other IR control device need to be
used, the IR EYE port on rear panel can be connected.
①Standby button:
Press it to enter/ exit standby mode.
②INPUTS:
Input channel selection buttons, same with the
corresponding front panel buttons
③OUTPUTS:
Output channel selection buttons, same with the
corresponding front panel buttons.
④Menu buttons:
⚫ALL: Select all inputs/outputs.
To convert an input to all outputs:
Example: Input 1 to all Outputs:
→Press INPUTS 1 + ALL + ENTER
⚫EDID management button:
1) One input port follows the EDID data from one
output port.
Example: Input 2 learns EDID data from output 4:
→Press EDID + INPUTS 2 + OUTPUTS 4+ ENTER
2) All input ports learn EDID data from one output
port.
Example: All input ports learn EDID data from output 3:
→Press EDID + ALL + OUTPUTS 3 + ENTER
⚫CLEAR: Withdraw button.
⚫ENTER: Confirm operation.
INPUTS
OUTPUTS
MENU
1 2 3
456
7 8
1 2 3
456
7 8
ALL EDID
CLEAR ENTER
1
2
3
4

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG 9 www.ute.de
6. GUI Control
The matrix switcher can be controlled via TCP/IP. The default IP settings are:
IP Address:
192.168.0.178
Subnet Mask:
255.255.255.0
Type 192.168.0.178 in the internet browser, it will enter the below log-in webpage:
Username: admin
Password: admin
Type the user name and password, and then click Login to enter the section for video
switching.

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG 10 www.ute.de
6.1 Switching Tab
Use the 8x8 button grid on the page to set which inputs are directed to which outputs.
For example, clicking the button on the Input 1 row and Output 1 column, directs input 1
to output 1.
Use the 6 numbered buttons under scene area to save and load layout presets.
•To save a given layout, first click one of the
numbered buttons, then click the Save button.
•To load a previously saved layout, first click one of
the numbered buttons, then click the Recall button.

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG 11 www.ute.de
6.2 Audio Tab
6.2.1 Audio Setting
•There are sixteen sources can be selected for eight digital SPDIF output ports.
Audio Output
Ports
Audio Sources
Input Breakout
Output Breakout
SPDIF 1 & Analog 1
Audio on Input 1
Audio on Input 2
Audio on Input 3
Audio on Input 4
Audio on Input 5
Audio on Input 6
Audio on Input 7
Audio on Input 8
Audio on Output 1
Audio on Output 2
Audio on Output 3
Audio on Output 4
Audio on Output 5
Audio on Output 6
Audio on Output 7
Audio on Output 8
SPDIF 2 & Analog 2
SPDIF 3 & Analog 3
SPDIF 4 & Analog 4
SPDIF 5 & Analog 5
SPDIF 6 & Analog 6
SPDIF 7 & Analog 7
SPDIF 8& Analog 8

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG 12 www.ute.de
6.2.2 Audio Volume
•Eight pairs analog L/R audio to control their outputs volume.
6.3 Configuration Tab
6.3.1 EDID Copy
⚫Copy the EDID of the selected output device to one or more input source device.

UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG 13 www.ute.de
6.3.2 EDID Setting
⚫Select the compatible built-in EDID for the selected input source.
⚫Upload user-defined EDID by the below steps:
1) Prepare the EDID file (.bin) on the control PC.
2) Select the User-defined.
3) Click the box , and then select the EDID file (.bin) according the tooltip.
4) Click Apply to upload the user-defined EDID, and then click Confirm to save
setting.