UTEPO UPSP200-2 User manual

Portable Solar Panel
1
2
Thank you for purchasing Portable Solar Panel. Before using this product at first time, please read the
instructions carefully to learn about the features and capabilities of the solar panel and how you can get the
best out of it.
Packing List
Please check the following items after unpacking, if any missing, please contact your local dealer.
Items
Quantity
Portable Solar Panel
1 pc
MC4 to DC7909, XT60, Anderson connector cable (length: 1m)
1 pc
Charging Dock
1 pc
Quick Installation Guide
1 pc
Appearance and Dimensions
Dimensions (mm)
Specifications
Solar Panel Items
Peak Power
200W
Power Voltage
19.8V
Power Current
10.1A
Open Circuit Voltage
23.7V
Short Circuit Current
10.65A
DC Output
200W/19.5V (-5% ~ +10%)
Folded Dimensions (L/W/H)
646*540*70mm
Unfolded Dimensions (L/W/H)
2386*540*5mm
Weight
8.8kg
Operating Temperature
-20~60°C
Charging Dock
DC Input
1*DC7909, 18~25V, 100W max.
USB-A1/USB- A2
5V/3A, 9V/2A, 12V/1.5A, 18W max. Support BC1.2, Apple, Samsung
AFC, QC2.0, QC3.0, HUAWEI FCP
USB-C(PD)
5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A, 60W max. Support
PPS/PD3.0/PD2.0, QC4+/QC4/QC3.0/QC2.0, AFC, FCP, Low/High
voltage SCP, PE2.0/PE1.1, SFCP
Protection
Undervoltage protection, Overvoltage protection, Overcurrent
protection, Short circuit protection, Overtemperature protection
Caution
Place the solar panel in direct sunlight don’t cover the panel with other objects.
Connect your device and solar charger with the accessory cable or any other certified power cable to
start the charging.
In order to get maximum solar energy, please adjust the solar panel towards sunlight in vertical direction.
Keep your phones and tablets out of the direct sunlight.
Excessive heat may cause damage.
Do not puncture, throw, drop, bend or modify this product.
Do not allow children to play with this product.
Product Installation
Step 1: Expanding the solar panel to receive more solar radiation, please try to keep the solar
panel surface and the sunlight at 90°.
Step 2: Connect DC to the output port, it can be used to charge various devices.
Do not place the charged device in direct sunlight or heated environment. Place the device in the pocket of the
panel or in the shade while charging.
The installation is completed.
200W Portable Solar Panel
Quick Installation Guide
2386
540
9

Portable Solar Panel Portable Solar Panel
3
4
Questions
1. Why the electronic device can’t charge?
Is the output connector plugged in or is the cable faulty?
Re-plug it once or replace new cable.
Is the Solar panel facing the sunlight?
Please readjust to the direction of solar panel, to confirm the position of the sunlight.
Is the surface of the solar panel contaminated with dirt or occlusion items?
Clean the surface of the panel with cloth.
Avoid other obstruction blocking the solar panel.
2. Why does electronic device charge slowly?
If there are clouds or rain this will affect charging rate.
Please replace a new cable and try again.
Do not place the electronic equipment in the direct sunlight or overheated environment for a long time.
3. What is the difference between the nominal output of the solar panel and the actual output?
The nominal maximum output power (rated output) of the solar cell is a value calculated by STC (Standard
Test Condition, this is the world’s recognized standard test condition for ground solar cell modules) in a
predetermined “standard state”. The “standard state” has a surface temperature of 25°C, air-mass of 1.5
and a solar intensity of 1000W/m2.
Version: V1.0, updated 2023-02-13.
The information in this document is subject to change without notice.
Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements,
information, and recommendations in this document do not constitute a warranty of any kind, express or implied.