Utilitech HV-18S180 User manual

ITEM #0366859
18 IN. FLOOR FAN
MODEL #HV-18S180
Français p.8
Español p.15
1
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-866-994-4148, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. -
5 p.m., EST, Friday.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date

PACKAGE CONTENTS
A
B
PART DESCRIPTION QUANTITY
1ydoBnaFA 1dnatSnaFB
2

HARDWARE CONTENTS (shown actual size)
3
AA BB CC
!SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding the product,
please call customer service at
1-866-994-4148, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
WARNING
• When using electric products, basic safety precautions should always be followed to reduce
the risk of fire, electric shock, and personal injury. Follow these important safety guidelines.
• Do not use this fan with any solid-state speed control device.
• Do not use an extension cord with this fan.
• Do not expose to rain. Store indoors.
• Do not use with damaged cord, plug or other parts.
• Keep cord away from heated surface.
• Do not handle plug or the fan with wet hands.
• Do not permit fingers to touch the terminals of plug when installing or removing the plug from
the outlet.
• Unplug or disconnect the fan from power supply before servicing.
• After servicing, any safety device (including grilles, impeller, etc.) should be reinstalled or
remounted as previously installed.
• This product is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they are given
supervision or instruction concerning use of the product by a person responsible for their
safety. Children should be supervised to ensure that they do not play with this product.
Plastic Nut Tightener
Qty. 2
(preassembled)
Screw
Qty. 2 Qty. 2
Curved Washer
PLEASE READ AND SAVE THESE INSTRUCTIONS.

CAUTION
• CONSIDER YOUR WORK AREA ENVIRONMENT. Don’t use fan in damp or wet locations.
Don’t operate fan in presence of flammable liquids, gases like gasoline or other fuels, lighter
fluid cleaners, oil-based paints, natural gas, hydrogen, coal dust, magnesium dust, grain dust,
or explosive dust like powder. Do not use or store near hazardous or toxic materials.
• USE SAFETY GLASSES. Also use face or dust mask if work area is dusty.The operation of
any fan can result in foreign objects being blown into the eyes, which can result in severe eye
damage. Always wear safety goggles complying with ANSI Z87.1.
• DON’T ABUSE CORD. Never pull the power cord or yank it to disconnect from receptacle.
To unplug, grasp the plug, not the cord. Keep cord away from heat, oil, and sharp edges.
Do not pull or carry by cord, use cord as handle, close a door on cord, or pull around sharp
edges or corners.
• MAINTAIN fan. Keep fan clean at all times. Keep dry, clean and free from moisture.
• DISCONNECT fan when not in use. Don’t operate unit unattended.
• NEVER stick any object into the grille openings of the fan.
• RETURN for repair or to replace damaged parts if any are found to be broken or if the fan is
inoperative.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. lf any part is missing or damaged, do not attempt to
assemble or operate the product.
Estimated Assembly Times: 45 minutes for wall fan
Tools Required for Assembly: Phillips Screwdriver (not included)
3/32 in. Drill Bit (not included)
4

BB
CC
AA
B
ASSEMBLY INSTRUCTIONS
5
HARDWARE USED
BB
CC
Screw x 2
2xrehsaWdevruC
AA
2xrenethgiTtuNcitsalP
2
1
1. TO USE AS A FLOOR FAN
The fan comes fully assembled.
No further assembly is required.
2. TO INSTALL AS A WALL FAN
Feed the screws (BB) through the curved washers
(CC) and the two holes on the fan stand (B) to
secure the fan to the wall.
WARNING
Mount fan on a wooden wall only.
To reduce the risk of electric shock and personal
injury, ensure the location for mounting is
able to support this fan.
Total weight of fan is 15 lbs.
It is recommended a qualified electrician mount
this fan.
TO ADJUST AIRFLOW UP AND DOWN
Tilt the fan to the desired angle.
Tighten the plastic nut tightener (AA) on
both tilt nuts to secure fan head (Fig. 2)．
TO ADJUST AIRFLOW UP AND DOWN
Tilt the fan to the desired angle.
Tighten the plastic nut tightener (AA) on
both tilt nuts to secure fan head (Fig. 1).
AA

OPERATING INSTRUCTIONS
1. ADJUSTING AIR SPEED
The fan has three speeds (LOW,
MEDIUM and HIGH).
Rotate the speed control switch on
the back of the unit to adjust air flow
to desired speed.
2. ADJUSTING OSCILLATION FEATURE
The internal oscillation feature can be
turned on by setting the RED switch on
the motor to the ON (1) position.
To disengage the oscillation feature,
push the RED switch to the OFF (0) position.
CARE AND MAINTENANCE
• Unplug from electrical source to clean.
• Use soft, damp cloth to clean. Following that, wipe with clean, dry cloth.
• Do not bend the fan blades.
• Store in a dry place.
TROUBLESHOOTING
Before returning to your retailer, call our customer service department at 1-866-994-4148,
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Fan won’t run. 1. Fan is not plugged in.
2. Unit is not turned on. 1. Make sure unit is plugged in.
2. Check that unit is
turned on.
Oscillating feature not
working. 1. Oscillating feature is not turned on. 1. Make sure that oscillation switch is
turned on.
6
8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.

WARRANTY
Limited One-Year Warranty
Every fan is thoroughly inspected and tested before leaving the factory. It is warranted to be free
of defects in workmanship and materials for a period of ONE YEAR from the date of purchase.
This Warranty is Void if:
• Alterations have been made to the product.
• Repairs are required because of normal wear and tear.
• Repairs have been made or attempted by anyone other than the manufacturer.
• The product has been mistreated, misused or improperly maintained and operated.
In no event shall the manufacturer be liable for any damage beyond the repair or replacement
as described above, including without limitation, indirect, incidental, or consequential damage.
This warranty is the only warranty made and is in lieu of all other warranties, expressed or implied
including without limitation, warranties of merchantability and fitness for a specific purpose.
and you may also have other rights, which vary fromThis warranty gives you specific legal rights
state to state. Some states do not allow the exclusion or limitation of incidental or consequential
damage, so the above limitations and exclusions may not apply to you. Some states do not allow
limitation on how long an implied warranty lasts, so the above limitations may not apply to you.
For questions about your warranty and warranty service, call 1-866-994-4148, 8 a.m. - 6 p.m., EST,
Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
REPLACEMENT PARTS LIST
TECHNICAL DATA
VOLTAGE/FREQUENCY CURRENT POWER CONSUMPTION
120 V/60 Hz 0.8 A 85 W
7
HF
B
E
C
G
A
I
J
AA
D
Printed in China
PART DESCRIPTION PART #
A Fan Motor 18F-1001
G Speed Switch 18F-1008
C Oscillation On/Off Switch 18F-1004
D Fan Blade 18F-1005
E Power Cord 18F-1006
F Rubber Feet 18F-1007
J Drum 18F-1011
B Fan Stand 18F-1003
Plastic Nut Tightener 18F-1002
AA
Rear Grille
Front Grille