UTS BS 8620 User manual

BS 8620:2016 PODIUM
Instruction/Safety Manual Self Closing Mobile 1 Person Low Level
Working Platform,1.75m and 2m platform height.
Maximum safety working load 150Kg
For more information, please contact us via:
Phone: [phone]
Email: [email protected]
Website: www.towersandpodiums.co.uk
Always carry out a risk assessment for each task before you start
work, to ensure BS8620:2016 Podium is the correct mode of
access for the task that is being undertaken.
1. With Podium closed, move into
position and lock caster wheels.
2. Unfold rear frame of the Podium 3. Ensure the bottom locking elbow
has engaged.
4. Push ladder hooks onto lowest
rung between the guides until it
locks. Now repeat for top of ladder.
5. Hook on platform at chosen height
and turn wind lock to closed position.
6. Attach stabilisers by tightening the
palm wheel on each coupler.

Document No: PM003, Version No: 1.2, Date: 01/12/2021, APPROVED BY:A.GUNTRIPP, REVIEWED BY:M.GRANGER
Component List:
1 x Main Frame
1 x Access Ladder
1 x Platform
2 x Stabilisers
All replacements can be purchased
directly from UTS Sales and Repairs
CONFIGURATION OPTIONS
Important: For all conguration options ensure that all stabiliser clamps are
fully tightened to ensure safe secure use.
1. Rear elevation against a wall. Position
both stabilisers at 90° from the Podium
UTS Sales and Repairs
Unit 1A
Canterbury Industrial Park
Island road
Hersden
Kent
CT3 4HQ
01227 860085
www.towersandpodiums.co.uk
2. Rear and side elevation against a wall.
Position stabiliser at 90° from the Podium
3. Side elevation against a wall. Position 1
stabilisers at 90° from the Podium, and 1
parallel to the wall
4. In open area, working at rear or over-
head, put stabilisers at 45° from body as
shown in picture.
5. In open area, working over sides or
overhead, put stabilisers at 90° from body
as shown in picture.