Uttermost 23307 User manual

Put theBack Frame (1)and SeatCushion (2)together, use oneShortBolt (S)to
fix theBack Frame (1)and SeatCushion(2)in the Center, and usefour Long Bolts
(L) to fixthe two back legs. Do not tighten All theBoltsuntilStep (5)is
completed.
Attach thetwo Front Legs(6)into theholesonthe SeatCushion (2)and use four
MediumLengthBolts(M)tofix.PleasenotethattheLeft Leg label in Blue goes into
the Hole label in blue, and Right LeglabelinRed goesinto theHole label in Red.
DonottightenAlltheBoltsuntilStep (5) is completed.

1
2
6
1
2
6
Put theLeft Side Stretcher (3)into theLeft Hole of the back Frame, andthe Left
HoleofthefrontLeftLeg.Andthesameassemblyforthe Right Side Stretcher (4)
intotheRightHoleofBackLeg,andtheRightHoleof the front Leg.of the legs.
Please note thatBlue andRed labels areused on theends of theStretchers and
the Holes.
Thenuse the Cross Bar(5) to connectthe LeftStretcher(3) and theRight
Stretcher(4).Pleasemakesurethescrewsholesofthe stretchers are facing
DOWNWARDofthechairandthescrewholesofthecross bar are facing BACKWARD of
the chair.Then usesix Screws (G)tosecure them. Screw Driver is neededhere (not
included)
Thenset the Chair on a flatsurface,make sure all theLegs areinsame Level and
thenuse the Allen Wrench(F)totighten allthe Bolts until secure.
Put theCoverOnand the assembly is completed.