Uttermost Revelation R24985 User manual

A Frame 1PC D glass(for Top ) 4 PCS
B Feet 4 PCS E Marble (for bottom) 1PC
C Finial 4 PCS
1. Take the parts carefully out of the carton, and place them on a
flat and soft surface, making sure that the parts will not be damaged.
2. Place the Frame (A) upside down on a flat & soft surface,
and then screw 4pcs Feet (B).
3. Turn over this frame, screw 4pcs Finials (C ) into the frame.
4. Carefully place the Tempered Glass onto the
To
p
shelf
,
and then
p
ut the Marble onto the Bottom Shelf .
To Clean, wipe with soft dry cloth.
STYLE: R24985
Parts/Hardware list

1.To avoid table tipping over, please read all instructions carefully and
completely before beginning use.
Part and hardware list
ABC
2PCS 2PCS 2PCS
Anti- tipping Instructions
Item :R24985
Tool needed but not supplied
Metal
Bracket
2"
Screw
Plastic
Strap
1. Use a pencil to mark desired location for screw on wall. The location
must be lower than the height of etegare, close etegare second shelf at
the two legs of the etegare frame. Locate the metal bracket (A) on the
wall and attach it through the smaller hole to the wall using 2" screw ( B
) provided in plastic bag.
2.Place etegare near wall. Then lace the end of plastic strap ( C )
through the large hole of the metal bracket pre-mounted on the wall and
two corners on the table top. Tie them together securely.
2. Save all packing materials until etegare is secured on wall to avoid
accidentally discarding any parts or hardware.
Pencil-one pc,tape measure-one pc,
screw driver pc,