Uttermost REVELATION VICEROY R24984 User manual

A Frame 1PC D glass(for Top ) 1PC
B Feet 4 PCS E Marble (for bottom) 1PC
C Finial 4 PCS
1. Take the parts carefully out of the carton, and place them on a
flat and soft surface
,
makin
g
sure that the
p
arts will not be dama
g
ed
2. Place the Frame (A) upside down on a flat & soft surface,
and then screw 4pcs Feet (B).
3. Turn over this frame, screw 4pcs Finials (C ) into the frame.
4. Carefull
y
p
lace the Tem
p
ered Glass onto the
Top shelf, and then put the Marble onto the Bottom Shelf .
To Clean, wipe with soft dry cloth.
STYLE: R24984
Parts/Hardware list

1.To avoid table tipping over, please read all instructions carefully and
completely before beginning use.
Part and hardware list
ABC
2PCS 2PCS 2PCS
Anti- tipping Instructions
Item :R24984
Tool needed but not supplied
Metal
Bracket
2"
Screw
Plastic
Strap
1. Use a pencil to mark desired location for screw on wall. The location
must be lower than the height of table, close table top at the two corners
of the table frame. Locate the metal bracket (A) on the wall and attach it
through the smaller hole to the wall using 2" screw ( B ) provided in
plastic bag.
2.Place table near wall. Then lace the end of plastic strap ( C ) through
the large hole of the metal bracket pre-mounted on the wall and two
corners on the table top. Tie them together securely.
2. Save all packing materials until table is secured on wall to avoid
accidentally discarding any parts or hardware.
Pencil-one pc,tape measure-one pc,
screw driver pc,