UV CAN SANITIZE TULIP 2 User manual

TULIP 2
Product Manual
Please read this instruction manual carefully before use, and retain for future reference.

1
Introduction
Congratulations on the purchase of your new Tulip 2 UVC air
purier, and welcome to the UV Can Sanitize family. We feel
honored that you have selected our products to help improve your
air quality.
Tulip 2 is a tabletop air purication system that sterilizes and
removes 99% of all dust, odor, bacteria, germs, and viruses from
the air. In addition to a pre lter, HEPA lter, and active carbon
ber lter; Tulip contains Samsung UVC LED lights. These lights
produce 260-280nm of germicidal power, neutralizing pathogens
from the air at a rate of 4590 cubic feet per hour. Adding to its
functionality, this device offers your choice of 3 different speed
modes (medium, high, and sleep). These features combined make
Tulip the perfect choice for almost any environment.
With Tulip you can feel safe knowing you are taking advantage
of cutting-edge disinfection technology to keep the air in your
environment safe from Covid 19, and other harmful pathogens.
Technical Specications
Specications
Input 12V, 2A
Power 24W
Noise Level <40 dB
Application <270 sqft
Net Weight 2.65 lbs
Dimensions ϕ 8x15.15 inches
1
2

2
Operating Instructions
1. For the rst use, please note that the adaptor is stored inside
the device. To retrieve it, turn the unit upside down and
remove the base cover by turning it
counterclockwise.
2. Remove adapter and return base cover by turning it clockwise
until it is secured.
3. To enter standby state, connect the adaptor to the device and
a wall plug.
4. Press POWER on the control panel located on the top of
the device, or on the remote control. Your Tulip 2 will beep
and start up in ventilation mode. Lights on the top of the
device will indicate which purication and speed mode your
device is turned to.
5. To activate UVC disinfection mode, press the UVC button.
It is safe to run both the UVC and standard ltration
continuously, 24 hours a day.
6. Use the SPEED HIGH , SPEED MID and SLEEP
mode butons to select the desired ltration and disinfection
rate.
7. The lter lifespan is approximately 2200 hours. When the lter
has reached the end of its working life, the lter indicator on
the top of the device will illuminate and beep 8 times,
Speed Mid
Power ON/OFF
Speed High
Sleep
Filter
UV-C
3

3
8. indicating that it is time to replace the lter. Tap the FILTER
button once to end the beeping. The lter light will remain on
as a reminder, but the appliance can continue to be operated.
The beeping will resume each time the appliance is turned on,
until the lter is replaced.
9. When the lter is replaced, please tap, and hold the FILTER
button for 3 seconds. This resets the indicator light, and the
appliance will recalculate the new lter replacement time.
10. To turn off the device, simply press POWER again on
either the top of the device or the remote control.
1. NOTE: If your air purier remains connected to
power after turning off, it will operate according
to the last settings used when you turn it on again.
The exception to this is UVC mode. This will need
to be manually reactivated any time the device is
turned back on.

4
Product Structure
Decorative Ring
Air Outlet Cover
PCBA
Upper cover
Fan
Fan Holder
Air Outlet
Body
UV-C
Decorative Ring
Lower Cover
Base Cover
Silicone Pad
Filter
4

5
Product Performance
1. Puries the air, absorbing dust, particles, hair, mold etc while
neutralizing harmful bacteria and viruses like Covid 19.
2. The UVC disinfection lamp is housed safely within the device
meaning it is safe to run in occupied spaces.
3. Removes unpleasant odors from the air such as smoke, waste,
sewage and residual chemicals from surface cleaning.
4. The activated carbon lter can also fully lter PM2.5 and
Formaldehyde.
Safety Precautions
1. Please ensure the appliance is unplugged before moving or
maintenance.
2. Do not rinse the appliance with water. Doing so may risk
electrical shock or damaging internal operational parts
including the motor.
3. Do not use the appliance near water or ame.
4. Do not place anything into the power input port other than the
power input itself. Doing so may cause irreparable damage to
the appliance.
5. Do not place any object into the air outlet area. Doing so may
cause the unit to malfunction.
6. Place the unit in a location that is safely out of reach of
children.
7. Make sure your hands are dry before inserting or removing
the power plug or adapter.
8. Do not clean the appliance with anything that is acid based.
Doing so may cause damage to the appliance.
5
6

6
Maintenance
For your safety, please ensure the device is turned off and the pow-
er is disconnected before replacing the lter.
1. Remove the base cover. To do this, turn the device
upside down and turn the base cover counterclockwise.
2. Remove the old lter. The lter is held in place by the base
cover. It should not require any force to remove once the
cover is removed.
3. Discard the old lter.
4. Remove the new lter from its packaging and slide it in place.
Return the base cover and turn it clockwise.
5. Tap and hold the lter button for 3 seconds to reset the lter
indicator light. Your Tulip 2 is now ready for action. Plug it in
and resume operation.
Troubleshooting
Problem Checklist Solution
My device will
not turn on
Is the power on? Switch on the power
Is the adaptor loose? Connect the adapter
There are odors
coming from the
wind outlet
Is the lter clogged? Replace the lters
Has the lter expired? Replace the lters
My device is not
purifying the air
well
Is the device well venti-
lated? Is it in the center
of the room?
Move the device to the
center of the room and
ensure proper airow
My device has
become noisy
Is there anything stuck
to the fan? A buildup of
dust and debris?
Clear fan of foreign
bodies to ensure proper
airow
1. 2. 3.
7
8

604-423-5599
[email protected]
www.uv-can.com