Uwatec G2 Operating manual

Button functions at the SURFACE in SCUBA and GAUGE modes
LEFT BUTTON
(Menu)
MIDDLE BUTTON
(Log)
RIGHT BUTTON
(Light/Dim)
Press Main menu Logbook Backlight
Press-and-Hold Oxygen setting Gas summary table Compass
Button functions while DIVING in SCUBA mode
LEFT BUTTON
(Book) MIDDLE BUTTON (More) RIGHT BUTTON (Light/Dim)
Press Bookmark +
stopwatch reset
Alternate window in
sequence Backlight
Press-and-Hold Start manual gas switch
Alternate display in
sequence; Compartment
saturation; Dive
prole/pictures
Compass
Button functions while DIVING in COMPASS mode
LEFT BUTTON MIDDLE BUTTON
(Set) RIGHT BUTTON (Exit)
Press Set bookmark and reset
stopwatch Set bearing
Press-and-Hold Erase set bearing Exit compass mode
Surface FunctionsDive Functions
QUICK USE GUIDE
TURN ON: Press-and-hold the right button.
GO BACK: Press-and-hold the right button.
RETURN HOME: Press-and-hold right & left
buttons simultaneously.
BUTTONS
Press
The act of pressing and
releasing one of the buttons.
Press-and-Hold
The act of pressing and
holding one of the buttons
for 1 second before release.

MB level Nitrox reset time
PDIS PMGMax surface time Desaturation reset All-silent mode
Dive mode Safety stop timer ppO2 max Water type
Dive settings ›
Use compass Auto-o time Declination
Digital compass ›
Altimeter ›
Max depth CNS O2=75% No stop=2 min Entering deco Dive time Tank pressure
RBT=3 min
LO no stop=2 min Entering deco at L0
Pressure signal Entering level stops MB stop ignored MB level reduced
Warning settings ›
Wake-up alarm Time Time zone
Clock settings ›
Device info Gas integration Backlight duration Backlight intensity Water contacts
Factory settings Feature upgrade Software update
Other settings ›
Screen conguration Language Start-up picture Units Workload Show owner info
Emergency info Display color
Personalization ›
Pictures ›
Plan dive
Connect
View logbook
O2% ppO2max/MOD
Use Adjustment
View pictures
Dive planner ›
Bluetooth ›
Logbook ›
02 settings ›
MB level Nitrox reset time
PDIS PMGMax surface time Desaturation reset All-silent mode
Dive mode Safety stop timer ppO2 max Water type
Dive settings ›
Use compass Auto-o time Declination
Digital compass ›
Altimeter ›
Max depth CNS O2=75% No stop=2 min Entering deco Dive time Tank pressure
RBT=3 min
LO no stop=2 min Entering deco at L0
Pressure signal Entering level stops MB stop ignored MB level reduced
Warning settings ›
Wake-up alarm Time Time zone
Clock settings ›
Device info Gas integration Backlight duration Backlight intensity Water contacts
Factory settings Feature upgrade Software update
Other settings ›
Screen conguration Language Start-up picture Units Workload Show owner info
Emergency info Display color
Personalization ›
Pictures ›
Plan dive
Connect
View logbook
O2% ppO2max/MOD
Use Adjustment
View pictures
Dive planner ›
Bluetooth ›
Logbook ›
02 settings ›
Main Menu
Navigate through the Main Menu with the three easy-push buttons
LEFT BUTTON
(Scroll Down) MIDDLE BUTTON (Scroll Up) RIGHT BUTTON (Enter Your Selection)
G2 Quick Use Card
For more information and to view this card in other languages, visit http://www.scubapro.com
P/N 06.205.360

SELECT FROM FOUR DIVE SCREEN OPTIONS — Light, Classic, Full, Graphical
(Go to Personalization > Screen conguration)
You can also rotate the screen to have the buttons positioned at the bottom of the screen.
WARNING!
When your G2’s battery reaches the end of its lifetime, it can only be replaced by an authorized SCUBAPRO service center.
Do not open your G2 or try to replace the battery yourself!
Opening the G2 housing or the metal cap on the side of the G2 will VOID YOUR WARRANTY.
Changing the battery must be done with particular care in order to prevent water from seeping in.
The G2’s warranty does not cover damages due to the improper placement
of the battery, or the incorrect closing of the battery cap.
LIGHT SCREENS IN FOUR DIFFERENT COLOR OPTIONS
CLASSIC FULL GRAPHICAL
CHECK YOUR BATTERY
❚Your G2 is powered by a rechargeable Li-Ion battery.
❚Always check the battery capacity before each dive.
❚If the battery warning appears, charge the battery.
G2 Quick Use Card
For more information and to view this card in other languages, visit http://www.scubapro.com

PAIRING YOUR TRANSMITTER
METHOD 1 AUTOMATIC
❚Mount 1ST stage with transmitter attached on a full tank.
❚Turn on your G2, make sure it is displaying the Time-of-Day screen,
then place it near the transmitter (as shown on right)
and open the tank valve.
METHOD 2 MANUAL
❚Mount 1ST stage with transmitter attached on a full tank.
❚Turn on your G2.
❚From the Time-of-Day display, press left button
to get to Main Menu.
❚Scroll to Other Settings.
❚Press right button to ENTER.
❚From Other Settings menu, scroll down Gas Integration.
❚Press right button to ENTER.
❚From Gas Integration menu, scroll to Pairing.
❚Press the right button to ENTER.
❚Open the tank valve, and you are ready to pair.
❚Using either method, once pressurized the transmitter will send a
pairing sequence to your G2.
❚When it receives this information, the display will show a list of tank
designations.
❚Scroll to Tank T1. (Tank T1 is always the main tank you start your dive with.)
❚Press right button to SAVE your selection.
❚Your G2 will conrm pairing with message: PAIRING TO T1 SUCCESSFUL.
❚At that point, tank pressure will appear on your G2 display,
and you’re ready.
G2 Quick Use Card
HOW TO POSITION AND USE THE HEART RATE MONITOR
❚Position your HR belt (as shown on right).
❚Adjust the strap so that it is comfortable to wear but snug enough so that it stays in place.
❚HR belt must be worn directly against the skin.
❚Moisten the electrode areas if your skin is dry or when diving in a drysuit.
❚The maximum operating depth for the HR belt is 197ft/60m.
TO ACTIVATE THE HEART RATE FUNCTION ON YOUR G2
❚Time-of-Day screen to Main Menu – press Enter.
❚Main Menu to Personalization – press Enter.
❚Scroll to Workload (WL) – press Enter.
❚Select Heart Rate - press right arrow to Save.
❚Advance to Max Heart Rate – set MHR - press right arrow to Save.
❚Advance to Base Heart Rate – set BHR - press right arrow to Save.
❚Advance to Skin Temp – set to On - press right arrow to Save.
❚Heart Rate & Skin Temperature functions are now activated.
For more information and to view this card in other languages, visit http://www.scubapro.com
P/N 06.205.407