V-TAC VT-1014 User manual

User Manual
LED RECHARGEABLE
TABLE LAMP
Operation Cautions:
1.Please do not put the lamp on the high-temperature surfaces, and do
not use it in flammable or humid environment, to avoid the breakdown,
short circuit etc.
2.The adapter must be under the specialized range.
3.Please steady the base while adjusting the arm.
4.The lamp head can be adjusted freely under the adjustment range.
But be cautious and never over adjustment to result in breakdown.
Maintenance
1. Please clear the lamp every two months to keep it smooth and bright.
2. Just use cleaning cloth and water to clean the dust.
3. For the filthy mark, please use cleaning cloth and soap suds.
4. Please do not clean the lamp by high-volatility and high-corrosive
liquid which can make it discoloring or broken.
Power off before cleaning.
Please ask for the professional person for checking and repairing
when it is broken.
If any abnormal cases, power off rapidly and contact dealer or
manufacturer.
VTAC EUROPE LTD
Bulgaria, Plovdiv 4000,
bul.L.Karavelow 9B VT-1014
PACKING LIST
USB Ca ble - 1pc
Table Lamp - 1pc
User Manual - 1pc
WARRAN TY
CARD
Warranty Card - 1pc

■ Table Lamp mode with touch button. When touching this switch
button, the lamp is on, and you can touch this button repeatedly
to change the brightness and turn off the light with circulation by
"maximal light-medium light-minium light-turn off"
■ When you touch this button stays at any brightness step more
than 2s, the light changes the temperature with circulation by
"warm light-cold light-natural light"
■ When you stays at any brightness and temperature step more
than 20s,if you touch this button again, the lamp is off directly.
When turning on the lamp next time, the brightness and
temperature will be same as last time.
Thank you for your purchasing this product.
Please read this instruction carefully to
understand its features and safety cautions.
FEATURES
OPERATION GUIDE
PARTS INDICATOR
Light guide panel
3 Steps Dimming Eye Protection 3 Modes CCT Anti-RadiationBuilt-in battery
Heat emission hole
Compound Button
(Adjusting brightness and temperature)
Adapter socket
SPECIFICATIONS
Power
Rating input
CCT
CRI:
Built-in Lithium battery
Charging Time
Working Time
Center luminance (30cm)
Material
Product size
N.W.
Colors
DC 5V 1A
4W
550LUX(max)
2800-3300K
4000-4500K
5000-5700K
≥80Ra
415g
200x50 263mmx
1200mAH
4~5 hours
6 hours(min) 48 hours(max)
ABS+PC+Auminum
Black/Gold/Silver
LED Table Lamp
Item
◆
◆
◆
◆
Three steps dimming brightness
Three modes for CCT
Emergency lighting
Memory function for the brightness and temperature