V-tech DDA200BT User manual

1

2
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ............................................................................................................................................5
GETTING STARTED .........................................................................................................................................................................6
LOCATION ......................................................................................................................................................................................... 6
INSTALLATION.................................................................................................................................................................................... 6
BATTERY LOW WARNING...................................................................................................................................................................... 7
BATTERY PERFORMANCE...................................................................................................................................................................... 7
SETTING UP FOR MULTIPLE PACKS .......................................................................................................................................................... 7
GETTING TO KNOW YOUR PHONE ................................................................................................................................................8
HANDSET BUTTONS............................................................................................................................................................................. 8
HANDSET DISPLAY ICONS ..................................................................................................................................................................... 9
ANSWERING MACHINE BASE ............................................................................................................................................................... 11
NAVIGATING THE MENUS ................................................................................................................................................................... 12
MENU LAYOUT................................................................................................................................................................................. 12
KEYSTROKE TABLE............................................................................................................................................................................. 13
BLUETOOTH ................................................................................................................................................................................. 14
INTRODUCING BLUETOOTH................................................................................................................................................................. 14
GLOSSARY OF TERMS......................................................................................................................................................................... 14
BLUETOOTH SETUP............................................................................................................................................................................ 15
PAIRING A MOBILE PHONE.................................................................................................................................................................. 15
AUTO CONNECTION .......................................................................................................................................................................... 15
PAIR A HEADSET ............................................................................................................................................................................... 15
TO PAIR AND CONNECT A HEADSET:..................................................................................................................................................... 15
PAIRED DEVICES ............................................................................................................................................................................... 16
RENAME A PAIRED DEVICE.................................................................................................................................................................. 16
REMOVE A PAIRED DEVICE.................................................................................................................................................................. 16
ACTIVE DEVICES................................................................................................................................................................................ 16
REVIEW THE ACTIVE DEVICES LIST......................................................................................................................................................... 16
CONNECT/DISCONNECT AN ACTIVE DEVICE ............................................................................................................................................ 16
REPLACE AN ACTIVE DEVICE ................................................................................................................................................................ 16
ADD AN ACTIVE DEVICE...................................................................................................................................................................... 17
REMOVE AN ACTIVE DEVICE ................................................................................................................................................................ 17
CHANGE PIN ................................................................................................................................................................................... 17
DOWNLOAD PHONEBOOK .................................................................................................................................................................. 17
TO DOWNLOAD A MOBILE PHONE PHONEBOOK...................................................................................................................................... 17
INTERRUPTION TO PHONEBOOK DOWNLOAD ......................................................................................................................................... 18
USING THE PHONE.......................................................................................................................................................................19
SWITCH THE HANDSET ON OR OFF........................................................................................................................................................ 19
MAKE,ANSWER OR END A HOME LINE CALL........................................................................................................................................... 19
MAKE,ANSWER OR END A MOBILE LINE CALL......................................................................................................................................... 19
ANSWER A MOBILE LINE CALL WHILE ON A HOME LINE CALL ...................................................................................................................... 19
ANSWER A HOME LINE CALL WHILE ON A MOBILE LINE CALL ...................................................................................................................... 19
MOBILE PHONE VOICEMAIL ................................................................................................................................................................ 20
USING A BLUETOOTH HEADSET ........................................................................................................................................................... 20
EARPIECE /HANDS FREE VOLUME ........................................................................................................................................................ 20
HOLD ............................................................................................................................................................................................. 21
MUTE............................................................................................................................................................................................. 21
HANDS FREE .................................................................................................................................................................................... 21
MAKE A HANDS FREE CALL.................................................................................................................................................................. 21
ANSWER A CALL IN HANDS FREE MODE ................................................................................................................................................. 21

3
SWITCH TO HANDS FREE MODE DURING A CALL ...................................................................................................................................... 21
REDIAL ........................................................................................................................................................................................... 21
REDIAL A REDIAL ENTRY ..................................................................................................................................................................... 21
SAVE A REDIAL ENTRY TO THE PHONEBOOK............................................................................................................................................ 21
DELETE A REDIAL NUMBER.................................................................................................................................................................. 22
FIND HANDSET (PAGING)................................................................................................................................................................... 22
TEMPORARY RINGER SILENCING .......................................................................................................................................................... 22
CHAIN DIALLING ............................................................................................................................................................................... 22
STORE A NUMBER ENTRY IN THE HOME PHONEBOOK............................................................................................................................... 23
REVIEW A PHONEBOOK ENTRY ............................................................................................................................................................ 23
DIAL AN ENTRY................................................................................................................................................................................. 23
EDIT A PHONEBOOK ENTRY................................................................................................................................................................. 24
EDIT THE TYPE OF A PHONEBOOK ENTRY................................................................................................................................................ 24
DELETE A PHONEBOOK ENTRY ............................................................................................................................................................. 24
REMOVE A DOWNLOADED MOBILE PHONEBOOK (DOWNLOADED MOBILE PHONEBOOKS ONLY)....................................................................... 24
SETTINGS .....................................................................................................................................................................................25
HANDSET SETTINGS........................................................................................................................................................................... 25
HANDSET RINGER VOLUME................................................................................................................................................................. 25
RINGER TONE................................................................................................................................................................................... 25
ALERT TONES (KEY TONE,LOW BATTERY AND NO COVERAGE).................................................................................................................. 25
SET DATE AND TIME .......................................................................................................................................................................... 25
DATE FORMAT ................................................................................................................................................................................. 25
TIME FORMAT.................................................................................................................................................................................. 25
SET DATE AND TIME MANUALLY .......................................................................................................................................................... 25
AUTO ANSWER................................................................................................................................................................................. 25
CLEAR VOICEMAIL............................................................................................................................................................................. 26
TO MANUALLY TURN OFF THE NEW VOICEMAIL INDICATOR:...................................................................................................................... 26
HANDSET RESET ............................................................................................................................................................................... 26
BASE SETTINGS................................................................................................................................................................................. 26
SET THE FLASH (RECALL)TIME ............................................................................................................................................................. 26
CHANGE SYSTEM PIN........................................................................................................................................................................ 26
CALLER ID..................................................................................................................................................................................... 27
INFORMATION ABOUT CALLER ID WITH CALL WAITING............................................................................................................................. 27
CALL LOG ........................................................................................................................................................................................ 27
CALL LOG DISPLAY SCREEN MESSAGES................................................................................................................................................... 27
VIEW CALL DETAILS ........................................................................................................................................................................... 27
DIAL FROM THE CALL LOG .................................................................................................................................................................. 27
SAVE A CALL LOG ENTRY TO THE PHONEBOOK ........................................................................................................................................ 27
DELETE AN ENTRY IN THE CALL LOG...................................................................................................................................................... 28
DELETE THE ENTIRE CALL LOG ............................................................................................................................................................. 28
CALL WAITING ................................................................................................................................................................................. 28
CALL WAITING ON THE HOME LINE ....................................................................................................................................................... 28
CALL WAITING ON THE MOBILE LINE ..................................................................................................................................................... 28
ANSWERING MACHINE ...............................................................................................................................................................29
USING THE ANSWERING MACHINE FROM THE HANDSET........................................................................................................................... 29
SWITCH THE ANSWERING MACHINE ON/OFF.......................................................................................................................................... 29
PLAY MESSAGES .............................................................................................................................................................................. 29
DELETE ALL OLD MESSAGES................................................................................................................................................................. 29
RECORD AND PLAY MEMOS ................................................................................................................................................................ 29
ANNOUNCEMENT ............................................................................................................................................................................. 29
RECORD YOUR OWN ANNOUNCEMENT ................................................................................................................................................. 29
PLAY YOUR ANNOUNCEMENT ............................................................................................................................................................. 30
ANSWER MACHINE SETTINGS .............................................................................................................................................................. 30
SET THE ANSWER MODE..................................................................................................................................................................... 30

4
SET THE ANSWER DELAY..................................................................................................................................................................... 30
SET RECORDING TIME OF INCOMING MESSAGE ....................................................................................................................................... 30
CALL SCREENING............................................................................................................................................................................... 30
TO CHANGE THE SETTINGS .................................................................................................................................................................. 30
TURN THE MESSAGE ALERT ON/OFF ..................................................................................................................................................... 30
REMOTE ACCESS............................................................................................................................................................................... 30
TO SET THE REMOTE ACCESS /CHANGE REMOTE ACCESS CODE................................................................................................................... 30
TO REMOTELY ACCESS YOUR ANSWERING SYSTEM .................................................................................................................................. 31
USING THE ANSWERING MACHINE AT THE BASE...................................................................................................................................... 31
SWITCH ON/OFF............................................................................................................................................................................... 31
CALL SCREENING............................................................................................................................................................................... 31
PLAY MESSAGES .............................................................................................................................................................................. 31
ADDITIONAL HANDSETS..............................................................................................................................................................32
CALL ANOTHER HANDSET ................................................................................................................................................................... 32
ANSWER AN INCOMING CALL (HOME AND MOBILE)DURING AN INTERCOM CALL......................................................................................... 32
TRANSFER A HOME OR MOBILE LINE CALL .............................................................................................................................................. 32
3-WAY CONFERENCE HOME OR MOBILE LINE CALL .................................................................................................................................. 32
CONFERENCE HOME AND MOBILE LINE CALLS ......................................................................................................................................... 32
USING THE HOME AND MOBILE LINES TOGETHER .................................................................................................................................... 33
DE-REGISTER A HANDSET ................................................................................................................................................................... 33
REGISTER AN ADDITIONAL HANDSET..................................................................................................................................................... 33
HELP .............................................................................................................................................................................................34
GENERAL INFORMATION ............................................................................................................................................................36
REPLACING THE HANDSET BATTERY ...................................................................................................................................................... 36
SAFETY ........................................................................................................................................................................................... 36
CLEANING ....................................................................................................................................................................................... 36
ENVIRONMENTAL ............................................................................................................................................................................. 36
SUPPORT AND CONTACT INFORMATION ...................................................................................................................................36

5
Important Safety Instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric
shock and injury. Basic safety precautions will include the following:
1. Make sure you read and understand all the instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning.
4. Do not use this product near water (for example, near a bath tub, kitchen sink, swimming pool) or in humid areas.
5. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.
6. Unplug this product from the wall outlet and refer servicing to an authorised service facility under the following conditions:
When the power supply cord or plug is damaged or frayed.
If the product does not operate normally by following the operating instructions.
If the product has been dropped and the outer casing has been damaged.
If the product exhibits a distinct change in performance.
7. Avoid using a telephone during an electrical storm. There may be a remote risk of electric shock from lightning.
8. Use only the supplied NiMH (Nickel Metal Hydride) battery. The operation periods for the handsets are only applicable with
the default battery capacity
9. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorised service facility. Opening or
removing parts of the telephone base or handset other than specified access points may expose you to dangerous voltages
or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.
10. Unplug this product from the wall outlet and refer servicing to an authorised service facility under the following conditions
When the power supply cord or plug is damaged or frayed.
If liquid has been spilled onto the product.
If the product has been exposed to rain or water.
If the product does not operate normally by following the operating instructions. Adjust only those controls that are
covered by the operating instructions. Improper adjustment of other controls may result in damage and often requires
extensive work by an authorized technician to restore the product to normal operation.
If the product has been dropped and the telephone base and / or handset has been damaged.
If the product exhibits a distinct change in performance.
11. Do not use the telephone to report a gas leak in the vicinity of the leak.
12. The power adaptors are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed
to hold the plug in place if it is plugged into a ceiling or an under-the-table / cabinet outlet

6
Getting started
Location
Place your DDA200BT within 2 meters of the main power socket and telephone socket. Make sure it is at least 1 meter away
from other electrical appliances to avoid interference. Your DDA200BT works by sending radio signals between the handset and
base. The strength of the signal depends on where you locate the base. Putting it as high as possible ensures the best signal. The
maximum range between the base station and the handset is approximately 300 meters
Installation
1. Plug the main power cable into the base station, plug the other end of the main power cable into main power wall socket
and switch the power on.
Note: Ensure power cord is fed through slot on base so unit sits flush with the desk.
2. To fit the NiMH battery into the handset, slide out the battery compartment cover. Place the supplied rechargeable battery
in the battery compartment, with the battery connector plugged in, as shown. Slide the battery compartment cover back.
3. Place the handset on the base to charge for at least 24 hours. When the handset is fully charged the Fully charged battery
icon will be displayed. The Charging LED lights up indicating that the handset is properly placed on the base.
4. When the battery is fully charged, plug one end of the telephone line cord into the base station and the other end into the
telephone wall socket.
Note: Ensure the line cord is fed through the slot on the base so unit sits flush with the desk.
WARNING
Do not place your DDA200BT in the bathroom or other humid areas.
IMPORTANT
The base station must be plugged into the mains power socket at all times. Do not connect the telephone line until the handset
is fully charged. Only use the power supply, telephone cables and NiMH battery supplied with the product.

7
Battery low warning
If the <BATTERY icon> flashes in the handset display you will need to recharge the handset before you can use it again. During
charging, the <BATTERY icon> will appear to be filling in the display.
Battery performance
In ideal conditions, a fully charged battery should give up to 12 hours talk time, or 160 hours standby time, on a single charge.
Note that the new battery will not reach full capacity until they have been in normal use for several days.
To keep the battery in the best condition, leave the handset off the base for a few hours at a time.
Running the battery right down at least once a week will help it last as long as possible. The charge capacity of the rechargeable
battery will reduce with time as they wears out, giving the handset less talk / standby time.
After charging your handset for the first time, subsequent charging time is about 68 hours a day. The battery and handset may
become warm during charging, however, this is normal.
Setting up for multiple packs
For each additional handset and charger
1. Plug the main power cable into the charger base, plug the other end into the main power wall socket and switch the
power on.
2. To fit the NiMH battery into the handset, slide out the battery compartment cover. Place the supplied rechargeable
battery in the battery compartment, with the battery connector plugged in, as shown above. Slide the battery
compartment cover back
3. Place the handset on the base to charge for at least 24 hours. When the handset is fully charged the <Fully charged
battery icon> will be displayed.
Main power cable
Main power
wall socket

8
Getting to know your phone
Handset buttons
1. EARPIECE
2. PHONEBOOK/UP
In idle mode: Press to access the phonebook.
In menu mode: Press to scroll up.
In editing mode: Press to move the cursor to the right.
During a call: Press to increase volume.
Call log / phonebook / redial list entry: Press to scroll up the list.
3. END CALL / CLEAR
In idle mode: Press and hold to power on / off the handset.
In menu mode: Press to exit to previous level. Press and hold to return to standby mode.
In name / number editing mode: Press to delete a digit or character.
During a call: Press to end the call.
While the handset is ringing, press to silence the ringer temporarily.
4 MOBILE
In idle mode: Press to recall the devices information or press to activate the mobile line.
During a mobile line call: Press to make or answer the mobile line call.
Flashes quickly when there is an incoming mobile line call.
Flashes slowly when a mobile line call is on hold.
5. CALL LOG /DOWN
In idle/pre-dial mode: Press to access the call log.
In menu mode: Press to scroll down.
In editing mode: Press to move the cursor to the left.
During a call: Press to decrease volume.
Call log /phonebook/redial list entry: Press to scroll down the list.
1
4
1
3
1
2
1
1
1
0
9
8
7
6
5
4
3
2
1

9
6. ALPHANUMERIC KEYPAD
In idle/pre-dial/editing mode/during a call:
Press to enter characters/ numbers.
# Hash key
In idle/pre-dial/during a call mode: Press to insert 
Call log/phonebook entry: Press repeatedly to display other dialling options.
* Star key
In idle/pre-dial/during a call mode: P
Press to switch to tone dialling temporarily during a call if you have pulse service
7 HOLD
During a home or mobile line call, press to put a HOME or MOBILE line call on hold.
8. MUTE/REMOVE
During a call: Press to mute/un-mute the microphone.
Call log /phonebook/redial list entry: Press to delete the selected entry.
In editing/pre-dial mode: Press to delete the digits.
9. MICROPHONE
10. REDIAL/PAUSE
In idle mode: Press repeatedly to view the last 20 numbers dialled.
In number editing/pre-dial mode: press and hold to insert a dialling pause (P).
11. SPEAKER
In idle/menu/pre-dial mode/during a call: press to turn on/off the speakerphone.
Call log /phonebook/redial list entry: press to make or answer a home line call with speakerphone.
During a call: Press to switch between the earpiece and loudspeaker.
12. HOME / CALL / FLASH
In idle/menu/pre-dial mode: Press to make a home line call.
During a home line call ringing: Press to answer the home line call.
During a home call: Press to answer an incoming call when you hear a call waiting alert.
Call log /phonebook/redial list entry: Press to make a home line call to the selected entry.
Flashes quickly when there is an incoming home line call.
Flashes slowly when a home line call is on hold
13. MENU/SELECT
In idle mode: Press to access main menu.
In menu/editing mode: Press to confirm and save the settings.
During a call: Press to access sub-menus (Intercom, Phonebook and Call Log).
In phonebook/call log entry: Press to edit the entry.
Note: Press this key when screen instructions ask you to PRESS OK
14 CHARGE LED
On: when the handset is charging in the telephone base or charger.
Handset display icons
Icons can be on (visible), Flashing or off (not visible):
Home line - Steady when the home line is in use or there is an incoming home line call.
MOBILE line - Steady when the mobile line is in use or there is an incoming mobile line call.
Bluetooth connected device(s) - indicates that there are Bluetooth connected devices on the active devices
list.

10
Bluetooth disconnected device(s) - indicates that there are Bluetooth disconnected devices on the active
devices list.
Wireless Bluetooth headset - Steady when a wireless Bluetooth headset is in use on the home line.
On when new voicemail received from the local telephone provider.
Off when there is no new voicemail.
On when answering machine is turned on.
Off when answering machine is turned off.
On when new answering machine message is received.
Off when no new answering machine message.
On when speaker phone is in use.
Off when speaker is off.
On when the HOME, MOBILE1 & MOBILE2 ringers are off.
Flashing when one or two of the HOME, MOBILE1, or MOBILE2 ringers are off.
On when you are reviewing a new missed call.
Off when the missed call has been reviewed.
On when the handset microphone is disabled during the call.
Battery is fully charged
Battery is 1/2 charged
Battery is 1/3 charged
FlashingBattery needs charging
Animation in cycle. Battery is charging.

11
Answering machine base
1. PAGE
Press to page all registered handsets.
2. VOLUME +
During message playback: Press to increase the speaker volume.
In idle mode: Press to increase the DDA200BT base ringer volume
3. DELETE
During message playback: Press to delete the current message.
In idle mode: Press twice to delete all previously reviewed messages.
4. SKIP FORWARD
During message playback: Press to skip to the next message.
5. VOLUME –
During message playback: Press to decrease the speaker volume.
In idle mode: Press to decrease the base ringer volume.
6. 2-digit 7-seg LED Display
Display
Description
0F-> --
When answering machine is OFF.
--
When answering machine is OFF and no new Answering Machine messages received.
0F /XX
Flashing XX alternatively with OF: Answering machine is OFF and there are XX new voice messages
received where XX is from 01 to 59.
0n-> XX
When answering machine is ON where XX is number of messages in Answering Machine memory.
00
Steady: No voice messages in Answering Machine.
XX
Flashing: There are XX new voice messages received where XX is from 01 to 59.
ZZ
Steady: There are ZZ old voice messages kept in the Answering Machine memory (no new voice
messages).
XX/FF
Flashing XX alternatively with FF: There are XX new voice messages received where XX is from 01 to
59 and the Answering Machine memory is full.
FF
Flashing FF: Answering Machine memory is full and there are no new messages, only old messages
are kept in TAM memory.
- - /XX
Flashing XX alternatively with - -: Time is not set and there are XX new voice messages received
where XX is from 01 to 59.
- -
Flashing - -: Time is not set and there are old voice messages kept in the Answering Machine
memory only (no new voice messages).
XX
Steady: Playing the current XX incoming message.
A1
Steady: Playing the current outgoing message (OGM).
XX/An
Flashing XX alternatively with An: XX new incoming message is now recording.
An denotes that the incoming message recording is in progress.
rA
Flashing: Remote access is in progress.
1
3
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2

12
7. PLAY/ STOP
In message playback mode: Press to play or stop messages playback.
8. SKIP BACKWARD
Press to repeat playing the current message.
Press twice to playback the previous message.
9. ANSWER ON/OFF
Press to switch the answering machine on/off.
10. IN USE Light
Steady when the telephone line is in use or on hold, or when the answering system is answering an incoming call, or when you
are registering a handset.
Flashing when another telephone is in use on the same line, or when you are deregistering handset(s) from the telephone base,
or when there is an incoming call.
11. CHARGING CRADLE
12. SPEAKER
13. DEVICE1 / DEVICE2 lights
Steady when the DDA200BT is paired and connected with a Bluetooth device.
Flashing alternately while pairing a Bluetooth device
Navigating the menus
Your DDA200BT has an easy to use menu system. Each menu has a list of options, as outlined on the following page. When the
handset is switched on and in standby mode:
1. Press MENU/SELECT to open the main menu.
2. Press UP/DOWN to move through the available options.
3. Press MENU/SELECT to select a menu option or the END CALL/CLEAR to return to the previous screen, or press and hold
TALK OFF/CLEAR to return to standby mode.
Menu layout
Play messages
Answering sys
Phonebook
Call log
Intercom
Play new msgs
Play old msgs
（Options appear if
new and old msgs
existed）
Announcement
Delete all old
Record memo
Answer ON/OFF
Ans sys setup
Home
Mobile 1/2/3/4
(If the Bluetooth
device has paired
and connected.)
Review
Del all calls
Intercom to: and
a list of registered
handsets If you
have more than
two registered
handsets
Bluetooth
Audio
Settings
Download PB
Add
Add headset
Active devices
Paired devices
Change PIN
Ringer volume
Ringer tone
Key tone
Low battery
No coverage
Clr voicemail
Set date/time
Time format
Date format
Auto answer
Register
De-register
Flash time
System PIN
Reset

13
Keystroke table
Upper Case
1
space 1 @ _ # = < > ( ) & £ $ ¥ ¤ §
2
A B C 2 Ä À Á Â Ã Å Æ Ç
3

4

5

6
M N O 6 Ö Ò Ó Ô Õ Ø Ñ
7

8
T U V 8 Ü Ù Ú Û
9
W X Y Z 9 Ý 
0
. 0 , / : ; " ' ! ¡ ? ¿ * + - % \ ^ ~ |
Lower Case
1
¤ §
2
a b c 2 ä à á â ã å æ ç
3

4
g h i 4 
5

6
m n o 6 ö ò ó ô õ ø ñ
7

8
t u v 8 ü ù ú û
9
w x y z 9 ý ÿ 
0
. 0 , / : ; " ' ! ¡ ? ¿ * + - % \ ^ ~ |

14
Bluetooth
Introducing Bluetooth
Your new DDA200BT telephone system with Bluetooth wireless technology has the following features:
Pair up to four Bluetooth enabled devices (mobile phones or headsets) with the DDA200BT.
Connect a maximum of two mobile phones to make and receive mobile line calls. Only one mobile phone can be active on a
call at a time.
Connect a Bluetooth enabled headset for making and receiving home line calls.
Conference mobile and home line calls.
Make and receive calls using either your home line or mobile network from any DDA200BT handset
Copy your mobile phone contacts to the DDA200BT
IMPORTANT INFORMATION
After plugging in the telephone base, wait at least 20 seconds before connecting a Bluetooth device. The screen shows
Bluetooth system busy if you try to connect too soon.
Ensure the Bluetooth function is enabled on your mobile phone please refer to your mobile phone instructions for this 
these may be located in your mobile phone user manual or on a CD provided with your mobile phone.
You may need to make your Bluetooth enabled mobile phone visible to other Bluetooth devices (place in discoverable mode)
before commencing the pairing process to your DDA200BT please refer to your mobile phone instructions for this these
may be located in your mobile phone user manual or on a CD provided with your mobile phone.
Ensure your mobile phone is placed next to the DDA200BT base unit during the pairing process and once paired and active.
Not all Bluetooth enabled mobile phones will require the pin from the DDA200BT (step 7 of the pairing process on page 15) 
please refer to your mobile phone instructions for this these may be located in your mobile phone user manual or on a CD
provided with your mobile phone.
Bluetooth wireless technology operates within a short range (up to 30 feet) from the DDA200BT. Keep connected mobile
phones and headset within this range.
If your mobile phone has poor reception in your home, DDA200BT cannot improve the reception. However, if there is a
location in your house with better reception, you can leave your mobile phone at that location while you use DDA200BT
mobile line. In order for this to work, the telephone base must be within 30 feet of the mobile phone.
Charge your mobile phone while it is connected to the DDA200BT. Your mobile phone's battery discharges faster while it is
connected to the DDA200BT via Bluetooth wireless technology.
Monitor your mobile phone's usage as mobile line calls using the DDA200BT are charged to your mobile account.
Refer to the Bluetooth setup section (page 15) to learn how to set up your Bluetooth device. Refer to the Using the phone
section on how to operate your Bluetooth devices with your new DDA200BT telephone system with Bluetooth wireless
technology.
Glossary of terms
Below are some terms used in this User Guide to help you become familiar with using your Bluetooth devices and your new
DDA200BT telephone system:
Active devices Bluetooth enabled devices, paired and connected to the DDA200BT. A maximum of two paired devices (two
mobile phones, or one mobile phone and one headset) can be connected to the DDA200BT, but only one can
be on a call at a time.
Bluetooth mobile phone refers to a Bluetooth enabled mobile telephone.
Mobile line the telephone line associated with your mobile phone service. On your telephone handset, press MOBILE to use
the mobile line.
Connected a Bluetooth enabled device (mobile phone or headset) can only be used when it is connected to the DDA200BT.
When a Bluetooth enabled device is connected to the DDA200BT and listed on the active devices list, it is ready
for use.
Disconnected a diagonal line appears across devices 1 and/or 2 when the corresponding Bluetooth enabled device is
disconnected from the DDA200BT.
Discoverable mode before a Bluetooth enabled device can be paired, it must be set to this mode. When pairing your mobile
phone, the DDA200BT is in this mode. Depending on the manufacturer, this mode is sometimes referred
to as Find Me or Visibility.
Home line your conventional telephone land line. On your DDA200BT handset, press CALL/ FLASH to use the home line.
Paired devices Bluetooth enabled devices (mobile phone or headset) that have shared registration information with the
DDA200BT. A total of four Bluetooth enabled devices can be paired with the DDA200BT; however, only two
paired devices can be connected to the base at a time.
Pairing sometimes refers to as bonding. The process of sharing registration information between two Bluetooth enabled
devices. Your Bluetooth enabled mobile phone or headset must first be paired to the DDA200BT in order to use it
with this cordless phone system.
PIN by default, the PIN is 0000 for the DDA200BT and for most Bluetooth devices. PIN information must be exchanged
between Bluetooth devices before they can be used. This is also known as a Passkey or Passcode.

15
Bluetooth setup
To use a Bluetooth enabled mobile phone with your DDA200BT, you must first pair and connect your Bluetooth device(s) with
the DDA200BT. All DDA200BT handsets can be used to make or answer calls on the mobile phone line.
Bluetooth wireless technology operates within a short range. When you pair a Bluetooth mobile phone or Bluetooth headset to
the DDA200BT, place the mobile phone next to the DDA200BT base to maintain sufficient signal strength.
Pairing a mobile phone
Before you begin, make sure that you have mobile coverage and your Bluetooth enabled mobile phone is not connected to any
other Bluetooth device. See page 34 for help.
To pair and connect a mobile phone:
1. In standby mode, press MENU/SELECT then UP/DOWN to select Bluetooth.
2. Press MENU/SELECT then UP/DOWN to select Add mobile.
3. Press MENU/SELECT. The display shows ADD MOBILE Place mobile phone next to base. Press OK
4. If there are already four devices on the paired devices list, the display shows Maximum of 4 devices can be paired and
prompts you to replace an existing paired device (page 16).
5. Press MENU/SELECT. The screen displays Please set your mobile phone to search for devices, then press OK.
6. If a device is already connected to the DDA200BT, the screen displays Connected device will be temporarily
disconnected. Press OK. Press MENU/SELECT to temporarily disconnect the device and continue the pairing process.
7. Press MENU/SELECT to set the DDA200BT to discoverable mode. Then, promptly turn on the Bluetooth feature of your
mobile phone, make sure the mobile is visible to other Bluetooth devices, and search for or add new devices.
8. Once your mobile phone finds DDA200BT, press the appropriate key on your mobile phone to continue the pairing
process.
9. Enter the PIN of the DDA200BT (the default PIN is 0000) into your mobile phone to continue the pairing process.
10. When a device is successfully connected, the handset displays Paired with mobile and then Mobile setup completed
Device connected. The corresponding status icon (Mobile1 or Mobile 2) displays. The corresponding device light on the
DDA200BT base (DEVICE1 or DEVICE2) turns on.
a. When you already have two devices on the active devices list, the handset shows Maximum of 2 devices can
be connected. You are prompted to replace an existing device on the active devices list (page 16).
Note: The pairing process may take up to one minute. If the pairing process fails, try again. The steps for the
pairing process may vary for different mobile phones. If this happens, follow the prompts on your mobile
phone and your DDA200BT to complete the pairing process. If you put the handset back in the DDA200BT base
or charger while pairing, the process discontinues and the handset returns to idle mode.
Auto connection
When a device is successfully paired with the DDA200BT but not connected, the handset displays Mobile setup completed
Device not connected and then Auto-connect function enabled Press OK. You can press MENU/SELECT to exit.
Pair a headset
Before you begin, make sure that your Bluetooth enabled headset is not connected to any other Bluetooth device. Refer to your
headset User Manual to learn how to search for or add new Bluetooth devices.
To pair and connect a headset:
1. In standby time. Press MENU/SELECT then UP/DOWN to select Bluetooth.
2. Press MENU/SELECT then UP/DOWN to select Add headset.
3. Press MENU/SELECT. The display shows ADD HEADSET Place Bluetooth headset next to base. Press OK.
If there are already four devices on the paired devices list, the screen displays Maximum of 4 devices can be paired
and prompts you to replace an existing paired device (page 16)
4. Press MENU/SELECT. The screen displays Please set your headset to discoverable mode, then press OK.
If a device is already connected to the DDA200BT, the screen displays Connected device will be temporarily
disconnected. Press OK. Press MENU/SELECT to temporarily disconnect the device and continue the pairing process.
5. Set your headset to discoverable mode (refer to the User Manual of your headset).
6. Press MENU/SELECT to search for your headset.
7. Once the DTTA200BT finds your headset, press MENU/SELECT.
8. Enter the PIN of your headset (the PIN for most Bluetooth devices is 0000), then press MENU/SELECT.
9. When the handset displays Headset A paired to base. Connect now? Press OK, then press MENU/SELECT on the handset.
When you already have two devices on the active devices list, the handset shows Maximum of 2 devices can be
connected. You are prompted to replace an existing headset on the active devices list (page xx).
When you already have one headset on the active devices list, the handset shows Only 1 headset can be connected.
You are prompted to replace the headset on the active devices list (page 16).

16
10. When a device is successfully connected, the handset displays Headset setup completed Device connected and the
corresponding status icon (Mobile1 or Mobile 2). The corresponding light on the DDA200BT base (DEVICE1 or DEVICE2)
turns on.
Note: The pairing process may take up to one minute. If the pairing process fails, try again. If you put the handset back in the
DDA200BT base or charger while pairing, the process discontinues and the handset returns to idle mode.
Paired devices
All paired devices are stored on the Paired devices list. Up to four devices (one headset only) can be paired with the
DDA200BT.
To use a paired device, it must be connected and on the active devices list.
Once you have paired a device with the DDA200BT, you do not need to repeat the pairing procedure again unless you
delete the device from the paired devices list.
Note: Only the first 15 characters of the device name are shown on the paired devices list.
Rename a paired device
You can change the name of a paired device on the paired devices list.
1. In standby mode, Press MENU/SELECT then UP/DOWN select Bluetooth
2. Press MENU/SELECT then UP/DOWN to select Paired devices,
3. Press MENU/SELECT then UP/DOWN to select a device when necessary.
4. Press MENU/SELECT then UP/DOWN to select Rename.
5. Press MENU/SELECT. The screen displays ENTER NEW NAME.
6. Use the keypad to edit the name (see writing tips in page 23).
7. Press MENU/SELECT to confirm. The handset displays Device renamed.
Remove a paired device
If you want to add another Bluetooth device and you already have the maximum of four devices on the paired devices list, you
must first delete a device from the paired devices list.
1. In standby mode, Press MENU/SELECT then UP/DOWN select Bluetooth
2. Press MENU/SELECT then UP/DOWN to select Paired devices,
3. Press MENU/SELECT then UP/DOWN to select a device when necessary.
4. Press MENU/SELECT then UP/DOWN to select Remove paired.
5. Press MENU/SELECT. The screen displays Remove device from paired list? Press OK.
6. Press MENU/SELECT to confirm. The handset displays Device removed from paired list.
Active devices
Only devices on the active devices list can establish a Bluetooth connection with the DDA200BT. Although two paired devices
can be connected to the DDA200BT, only one Bluetooth mobile phone or a headset can be on a call at a time.
Note: When adding, removing, or replacing a Bluetooth device on the active devices list, all connected devices are temporarily
disconnected until the procedure is complete. It may take up to two minutes to reconnect.
Review the active devices list
1. In standby mode, Press MENU/SELECT then UP/DOWN to select Bluetooth
2. Press MENU/SELECT then UP/DOWN to select Active devices,
3. Press MENU/SELECT to review.
Connect/disconnect an active device
While in the active devices menu, you may connect or disconnect your active device.
1. In standby mode, Press MENU/SELECT then UP/DOWN to select Bluetooth.
2. Press MENU/SELECT then UP/DOWN to select Active devices.
3. Press MENU/SELECT then UP/DOWN to select a device when necessary.
4. Press MENU/SELECT then UP/DOWN to select Connect or Disconnect (whichever is applicable)
5. Press MENU/SELECT to confirm. The handset displays Device connected/Device disconnected.
Note: When your active device is connected, you are prompted to select Disconnect. When your active device is disconnected,
you are prompted to select Connect.
Replace an active device
You can replace an active device with a device on the paired devices list even if you already have two devices on the active
devices list.
1. In standby mode, Press MENU/SELECT then UP/DOWN to select Bluetooth.
2. Press MENU/SELECT then UP/DOWN to select Paired devices.
3. Press MENU/SELECT then UP/DOWN to select a device.
4. Press MENU/SELECT then UP/DOWN to select Connect.

17
5. Press MENU/SELECT. The handset display Maximum of 2 devices can be connected and then Replace an existing active
device with mobile? Press OK.
6. Press MENU/SELECT. You are prompted to select a device on the paired devices list.
7. Press UP/DOWN to select the device to be replaced, then press MENU/SELECT. The handset displays
Device removed from active devices list and then Connecting Mobile Phone A to the base...
8. Depending on your mobile phone settings, you may need to press a key on your mobile phone to confirm the connection.
When you successfully replace and connect an active device with a paired device, the handset displays Device connected.
Add an active device
You can have a maximum of two devices on the active devices list.
1. In standby mode, Press MENU/SELECT then UP/DOWN to select Bluetooth.
2. Press MENU/SELECT then UP/DOWN to select Active devices.
3. Press MENU/SELECT then UP/DOWN to select empty position.
4. Press MENU/SELECT. The display shows Add.
5. Press MENU/SELECT then UP/DOWN to select a device from the paired devices list.
6. Press MENU/SELECT. The handset displays Device added to active list and then Connecting Mobile Phone B to the base... If
there are no paired devices to add, the handset displays All paired devices are devices already connected.
7. Depending on your mobile phone settings, you may need to press a key on your mobile phone to confirm the connection.
When you successfully add and connect an active device, the handset displays Device connected.
Remove an active device
You can remove an active device from the active devices list.
1. In standby mode, press MENU/SELECT then UP/DOWN to select Bluetooth.
2. Press MENU/SELECT then UP/DOWN to select Active devices,
3. Press MENU/SELECT then UP/DOWN to select the desired device.
4. Press MENU/SELECT then UP/DOWN to select Remove active.
5. Press MENU/SELECT. The handset displays Device removed from active list.
Note: Even though the active device is removed from the active devices list, it is still on the paired devices list
Change PIN
You are required to enter a PIN when establishing a Bluetooth connection. The default Pin of your DDA200BT is 0000.
1. In standby mode, press MENU/SELECT then UP/DOWN to select Bluetooth.
2. Press MENU/SELECT then UP/DOWN to select Change PIN,
3. Press MENU/SELECT. The display shows ENTER NEW PIN and the existing PIN.
4. Use the keypad to enter a new four-digit code. (See writing tips in page 23).
5. Press MENU/SELECT to save.
Download phonebook
You can download up to four mobile phone phonebooks to your DDA200BT telephone system via Bluetooth wireless technology.
Each downloaded mobile phonebook can store up to 1,500 entries with up to 30 digits for each phone number and 15
characters for each name.
Before downloading the phonebook, make sure the mobile phone is paired to your DDA200BT and on the active devices list.
Check your mobile phone User instructions to confirm that phonebook transfer is an available option.
Place your mobile phone next to theDDA200BT when you download a mobile phone phonebook to your DDA200BT
To download a mobile phone phonebook
1. In standby mode, press MENU/SELECT then UP/DOWN to select Bluetooth.
2. In standby mode, press MENU/SELECT then UP/DOWN to select Download PB.
3. Press MENU/SELECT.
If there is no mobile phone paired to the system, the handset displays No mobile device paired. Press OK to add
mobile.
4. Press UP/DOWN to select a desired device, then press MENU/SELECT.
If the selected device is on the paired devices list but not on the active devices list, the handset displays No mobile on
active devices list. Press OK to add.
If the selected device is on the active devices list but disconnected, the handset displays Not connected. Place it next
to the base to connect mobile. Press OK.
phonebook has already been downloaded to DDA200BT before, the handset displays Mobile
Phone A Last update: MM/DD/YY To continue, press OK. If you press MENU/SELECT to continue the downloading
process, the stored phonebook for that particular mobile phone is erased and replaced with the current mobile phone
phonebook. The handset then displays Phonebook Mobile Phone A will be erased. To download press OK. Press
MENU/SELECT to confirm. If you have edited the downloaded entries (page xx), those changes are lost.

18
If you already have four downloaded mobile phonebooks, the handset displays Memory is full. Replace current
phonebook? Press OK when you try to download another mobile phone phonebook. Press MENU/SELECT and the
system prompt you to replace an existing phonebook.
5. Press UP/DOWN to select one of the following options:
Phone memory - download all contacts stored in your phone memory.
SIM card only - download all contacts stored in your SIM card.
Phone and SIM - download all contacts stored in both your phone memory and SIM card. Press MENU/SELECT. During
the downloading, the handset displays the progress. All system handsets display Downloading PB.
6. When the downloading process is complete, the handset displays Download ended Total #XXXX entries saved. Press OK.
Press MENU/SELECT or END CALL/CLEAR to return to the downloaded phonebook menu.
Note: Certain mobile phones do not support SIM card download. If this is the case, try transferring the contacts from your
SIM card to your mobile phone memory first, then download from your mobile phone memory. For more information on
how to transfer contacts from your SIM card to your mobile phone memory, see the user instructions of your mobile phone.
When downloading the phonebook from your Bluetooth enabled mobile phone, some data may not transfer. For example,
if you have home, mobile and work numbers for a particular contact, the three categories may not transfer to your
DDA200BT.
For certain mobile phones, you may need to press a key to confirm the phonebook download.
Interruption to phonebook download
If you are downloading a phonebook from a mobile phone and the mobile phone receives a call, the downloading process stops
and all handsets display Download PB aborted. When you try to view the downloaded mobile phonebook, the handset displays
Last download aborted: MM/DD/YY Press OK. You need to download the phonebook again.
If you are downloading a phonebook from a mobile phone and the DDA200BT loses power, the downloading process stops.
When you try to view the phonebook, the handset displays No entries found. Try downloading from SIM or Phone only Press
OK.You need to download the phonebook again.
The downloading progress screen may be replaced with Mobile line in use. To return to the downloading progress screen, do
steps one through four on page 17. The downloading process continues even if any of the following occur
You receive or make calls on the home line.
You place the handset in the DDA200BT base or charger.
You access your mobile phone menu features.
The handset battery becomes depleted or the handset loses connection with the DDA200BT.
Note: During the downloading process, do not attempt to make changes to your mobile phone phonebook.

19
Using the phone
Switch the handset on or off
To switch the handset off:
1. Press and hold <END CALL>.
2. Press <MENU/SELECT> to confirm.
To switch the handset on
1. Press and hold <END CALL> again.
Make, answer or end a home line call
To make a home line call
Press CALL/FLASH or SPEAKER then enter the telephone number. Or enter the telephone number then press CALL/FLASH or
SPEAKER.
To answer a home line call:
When you receive a home line call, the phone rings. The  
it matches an entry in the phonebook.
Press CALL/FLASH or SPEAKER to answer an incoming home line call.
To end a home line call
Press END CALL/CLEAR or put the handset in the DDA200BT base or charger.
Make, answer or end a mobile line call
You can connect a maximum of two Bluetooth enabled mobile phones to the DDA200BT, but only one mobile phone can be
used on a mobile line call at a time. All DDA200BT handsets can be used to make or answer calls on the mobile phone line.
To make a mobile line call:
Enter the telephone number. Then press MOBILE to make a mobile line call if you have only one mobile phone connected to
the DDA200BT. If you have two mobile phones connected to the DDA200BT, the telephone system prompts you to select a
mobile phone before you make a mobile line call.
Note: When dialling out via the mobile line you need to enter the complete number, including the area code (even for local
calls).
To answer a mobile line call:
Press MOBILE.
Note: You can also use your mobile phone to answer the call. If you answer with your mobile phone, it disconnects from the
DDA200BT.
To end a mobile line call:
Press END CALL/CLEAR or put the handset in the DDA200BT base or charger.
Answer a mobile line call while on a home line call
If you are on a home line call and you receive an incoming mobile line call, you hear a beep and or displays on the
handset you are using. The DDA200BT base and all other handsets ring.
To answer the incoming mobile line call
Press MOBILE on the handset. The home line call is automatically placed on hold and all other handsets display Home line
call on hold and Mobile line in use alternately.
To end the mobile line call
Press END CALL/CLEAR on the handset. The home line is still on hold. All handsets display Home call on hold.
To resume the home line call on hold
Press CALL/FLASH on the handset.
Answer a home line call while on a mobile line call
If you are on a mobile line call and you receive an incoming home line call, you hear a beep and displays on the handset you are
using. The DDA200BT base and all other handsets ring.
Press CALL/FLASH on the handset. The mobile line call is automatically placed on hold and all other handsets display Mobile
call on hold and Home line in use alternately.

20
To end the home line call
Press END CALL/CLEAR on the handset. The mobile line is still on hold. All handsets display Mobile call on hold.
To resume the mobile line call on hold
Press MOBILE on the handset.
Note: If you have turned on your answering system and you do not answer the incoming home line call, the call is answered
by your answering system.
If you make or answer a home line call on a handset, you can transfer the call to your headset. The handset remains active,
but the handset earpiece and microphone are muted. If you hang up the handset, the call will end.
Mobile phone voicemail
If you have voicemail service active on your mobile phone, and you do not answer the incoming mobile line call, the call will be
answered by your mobile mobile phone service provider for more information about voicemail
service.
Call timer
Your handset will automatically time the duration of all external calls. The handset display shows the call duration both during
and for a few seconds after your call is terminated.
Out of range warning
When the handset goes out of range of the base, the line will hang up if you are on a call. When you move back within range, the
handset will automatically reconnect to the base.
Using a Bluetooth headset
You can use a Bluetooth headset on home line calls. However, you will need to stay within 30 feet from the DDA200BT to
maintain the Bluetooth signal.
To answer a home line call using a Bluetooth headset
Press the call key on your headset.
To end a home line call you answered from a Bluetooth headset
Press the call key on your headset.
If you make or answer a home line call on a handset, you can transfer the call to your headset. The handset remains active, but
the handset earpiece and microphone are muted. If you hang up the handset, the call will end.
To transfer a call from a handset to a Bluetooth headset
Press MENU/SELECT twice to select Use headset.
To transfer a call from the headset back to the handset
Press MENU/SELECT twice to select Use handset.
To end a call that started at the handset
Press END CALL/CLEAR or put the handset in the DDA200BT base or charger.
Note: If you answer a call using a headset, and you lose the Bluetooth connection or the battery is depleted, the call will be
lost.
If you are using a headset for a call which is transferred from DDA200BT handset, and you lose the Bluetooth connection or
the battery of the headset is depleted, the call will be transferred back to the originating handset.
Earpiece / hands free volume
Press UP/DOWN to adjust the listening volume of the earpiece or loudspeaker during a call. Each press of the button increases
or decreases the volume level by one increment.
1. Press UP/DOWN to increase or decrease the volume level while on a call.
Note: The handset earpiece volume setting (1-5) and speakerphone volume setting (1-6) are independent. When the volume
reaches the minimum or maximum setting, you will hear two beeps.