V-tech Lullaby Teddy Projector User manual
Dear Parent,
We at VTech understand that a child's needs and abilities change as they grow
and with that in mind we can develop our toys to teach and entertain at just the
right level. Babies need toys that will stimulate their interest in different
textures, sounds and colours, while on-the-go toddlers and pre-schoolers
want more interactive toys to develop their imaginations and encourage
their language development. As they progress to more challenging
curriculum at school, VTech keeps pace with a wide variety of cool,
aspirational and interesting computers for learning. Every toy is unique and
helps your child develop in different ways for the best all-around learning.
To learn more about VTech toys, visit www.vtechuk.com
4-10 years
3-6 years
0-36 months
2
INTRODUCTION
Thank you for purchasing the VTech®Lullaby Teddy Projector crib
toy!
The Lullaby Teddy Projector will soothe your baby into a peaceful
sleep. Your baby will relax as the soothing lights project onto the ceiling,
while soft melodies, natural sound effects and soothing motherly phrases
lull your baby to sleep. Nursery mode creates a perfect environment
to soothe baby to sleep with gentle sing along songs, phrases, sound
effects and melodies. Nature mode will have a softer effect with subtle
and natural sound effects. Press the cute teddy bear button to rotate
the melodies, sing along songs or natural sound effects. With 5 and 10
minutes settings your baby will soon drift into dreamland.
Introduction
strap
timer
switch
light projector
selector button
low volume
button
high volume
button
off/nursery/
nature swtch
bear button
3
INCLUDED IN THIS PACKAGE
- One VTech®Lullaby Teddy Projector
- One strap for cot attachment
- One User’s Manual
WARNING: All packing materials, such as tape, plastic sheets,
wire ties and tags are not part of this toy, and should
be discarded for your child’s safety.
Please loosen the battery cover screws slightly and
remove the wire packaging ties to ensure all the wire
is removed form the back of this product.
NOTE: Please keep instruction manual as it contains important information.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the
unit. Use a coin or a screwdriver to loosen
the screw.
3. Install 4 new ‘AA’ (AM-3/LR6) batteries
following the diagram inside the
battery box. (The use of new alkaline
batteries is recommended for maximum
performance.)
4. Replace the battery cover and tighten the screw to secure the battery
cover.
BATTERY NOTICE
• The use of new alkaline batteries is recommended for maximum
performance.
Included in This Package
4
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being
charged (if removable).
• Rechargeable batteries are only to be charged under adult
supervision (if removable).
• Different types of batteries or new and used batteries are not to be
mixed.
• Only batteries of the same or equivalent type as recommended are
to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended
number of power supplies.
• Donotdisposeofbatteriesinre.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
With the VTech®Lullaby Teddy Projector, safety comes rst. To
ensure your child’s safety, the assembly of this product is an adult
activity, not a child’s. Therefore, please ensure that the cot attachment
strap is securely locked into position to avoid injury. Please follow
theinstructionsbelowcarefullyandmakesurethenalassemblyis
correct. Attach only to cots with sturdy rails and spindles. Do not attach
to playpens with mesh walls.
Please make sure the cot attachment strap is out of reach from children
when placed in the cot. Please ensure the cot light is positioned upright
with the projection light facing directly upwards.
Please remove the plastic strap and do not give it to the child when
the toy stands alone.
Getting Started
5
Assembly Instructions
ASSEMBLY INSTRUCTIONS
1. Place the unit in the cot bringing the
strap over the top rail. Slip the top of
the strap under the slot on the back
of the unit and secure. You can adjust
the hanging height by choosing the
appropriate hole on the top of strap.
2. Pull slightly on the unit to make sure
the strap has been securely fastened.
The unit should be snug against the cot
rail. Please check the unit frequently to
ensure it is still secure.
PRODUCT FEATURES
1. ON/OFF SWITCH
To turn the unit ON, slide the OFF /
NURSERY / NATURE SWITCH to
the NURSERY ( ) or NATURE ( )
position.To turn the unit OFF, slide the
OFF / NURSERY / NATURE SWITCH
to the OFF ( ) position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech® Lullaby Teddy Projector will
automatically power-down without any input after the time setting
isnished.Theunitcanbeturnedonagainbypressingthebear
button or sliding the timer switch or mode switch.
6
ACTIVITIES
1. Slide the OFF / NURSERY / NATURE
mode SWITCH to the nature or nursery
position to turn the unit on. In nature
mode you will predominantly hear
natural sound effects and in nursery
mode you will hear melodies. Asoothing
light up image will be projected onto the
ceiling.
2. Slide the timer switch to demo mode
to turn the unit on and hear a short
demonstration of the soothing phrases,
sound effects, sing along songs and
melodies. A soothing light up image
will be projected onto the ceiling for
approximately 10 seconds to show a
small demonstration of the projector.
3. Slide the timer switch to 5 or 10
minute selection to turn the unit on for
the relevant selected time and mode. A
soothing light up image will be projected
onto the ceiling.
4. Press the bear button to hear sing
along songs, motherly phrases,
soothing melodies and soft nature
sound effects. The response will
depend on the selected mode. If baby is
not asleep after the selected time, then
press the bear button to re-select the
mode and time.
Activities
7
5. Press the volume control buttons to
change the level of the volume.
6. Press the light selector button to
switch the projector on and off.
MELODY LIST
1. Cradle Song ( Brahms Lullaby)
2. Are You Sleeping
3. My Bonnie Lies over the Ocean
4. Hush Little Baby
5. Beautiful Dreamer
6. Fur Elise
7. Greensleeves
8. Moonlight Sonata
9. Oh Where Has My Little Dog Gone
10. Clair de Lune
11. Rock a Bye Baby
12. All Through the Night
13. Au Clair de La Lune
Activities
8
14. Shenandoah
15. Twinkle Twinkle Little Star
16. Sailing,Sailing
SONG LYRICS
SONG 1
Rock a Bye Baby, on the tree top,
When the wind blows, the cradle will rock.
SONG 2
Twinkle Twinkle Little Star,
How I wonder what you are.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
please follow these steps:
1. Please turn the unit OFF.
Care & Maintenance
9
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new
batteries.
If the problem persists, please call our Consumer Services Department
on 01235 546810 (from UK) or +44 1235 546 810 (outside UK) and a
service representative will be happy to help you.
IMPORTANT NOTE:
Creating and developing Infant Learning products is accompanied
by a responsibility that we at VTech®take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department on
01235 546810 (from UK) or +44 1235 546 810 (outside UK), with
any problems and/or suggestions that you might have. A service
representative will be happy to help you.
CLASS 1
LED PRODUCT
Troubleshooting
This warranty is valid for the UK and Eire only. For products purchased outside
the UK and Eire, please contact your local distributor or place of purchase.
Table of contents
