V-tech S2212-10 User manual

VTech S2212-10 SIP Phone Operation Guide
Managed Services Integration and Planning
Exported on 04/18/2023

Managed Services Integration and Planning – VTech S2212-10 SIP Phone Operation Guide
– 2
Table of Contents
1 Phone Button Layout.............................................................................................4
2 Phone Usage and Operation .................................................................................5
2.1 Receive a call ................................................................................................................................5
2.2 Place a call....................................................................................................................................5
2.3 End a call ......................................................................................................................................5
2.4 Switch a call between the corded handset and the telephone base speakerphone................5
2.5 Volume..........................................................................................................................................5
2.6 Call waiting...................................................................................................................................6
2.7 Redial............................................................................................................................................6
2.8 Mute ..............................................................................................................................................6
2.9 Hold ..............................................................................................................................................6
2.10 Transfer a call ...............................................................................................................................6

Managed Services Integration and Planning – VTech S2212-10 SIP Phone Operation Guide
– 3
•
•
•
•
•
•
•
•
•
•
•
•
Table of Contents
Phone Button Layout(see page 4)
Phone Usage and Operation(see page 5)
Receive a call(see page 5)
Place a call(see page 5)
End a call(see page 5)
Switch a call between the corded handset and the telephone base speakerphone(see page 5)
Volume(see page 5)
Call waiting(see page 6)
Redial(see page 6)
Mute(see page 6)
Hold(see page 6)
Transfer a call(see page 6)

Managed Services Integration and Planning – VTech S2212-10 SIP Phone Operation Guide
Phone Button Layout– 4
1 Phone Button Layout

Managed Services Integration and Planning – VTech S2212-10 SIP Phone Operation Guide
Phone Usage and Operation– 5
•
•
•
2 Phone Usage and Operation
Using the corded handset and the telephone base
The corded handset and the telephone base speakerphone cannot be used at the same time. However, calls can be
switched between the corded handset and the telephone base speakerphone.
2.1 Receive a call
The telephone rings and the LINE key flashes when there is an incoming call.
To answer a call using the corded handset:
Lift the corded handset from the telephone base. The LINE key illuminates when the phone line is in use.
To answer a call using the telephone base speakerphone:
On the telephone base, press LINE or /SPEAKER. The LINE key illuminates when the phone line is in use. The /
SPEAKER key illuminates when in speakerphone mode.
2.2 Place a call
On the telephone base, lift the corded handset, or press LINE or /SPEAKER. Listen for a dial tone and then dial the
desired number, or press a Speed Dial key to dial a programmed number. The LINE key illuminates when the phone
line is in use. The /SPEAKER key illuminates when in speakerphone mode.
2.3 End a call
Place the corded handset in the telephone base, or press LINE or /SPEAKER when in speakerphone mode.
2.4 Switch a call between the corded handset and the telephone base
speakerphone
To switch a call from the corded handset to the telephone base speakerphone, press /SPEAKER on the
telephone base, then place the corded handset on the telephone base cradle.
To switch a call from the telephone base speakerphone to the corded handset currently on the telephone
base cradle, lift the corded handset from the telephone base cradle.
To switch a call from the telephone base speakerphone to the corded handset which is not on the telephone
base cradle, press /SPEAKER on the telephone base.
2.5 Volume
Listening volume and ringer volume can be adjusted at the telephone base.
To adjust the listening volume:
During a call, press +/VOLUME or -/VOLUME to adjust the listening volume. The next call returns to the default
listening volume.
To adjust the ringer volume:
When the telephone is idle, press +/VOLUME or -/VOLUME to adjust the ringer volume.

Managed Services Integration and Planning – VTech S2212-10 SIP Phone Operation Guide
Phone Usage and Operation– 6
•
•
•
2.6 Call waiting
When you hear a call waiting tone during a call, press FLASH on the telephone base to put your current call on hold
and take the new incoming call.
Press FLASH or the switch hook rapidly at any time to switch back and forth between calls.
2.7 Redial
The last dialed number is stored for 15 minutes.
To redial the last dialed number:
Lift the corded handset from the telephone base, or press LINE or /SPEAKER. Listen for a dial tone. Then press
REDIAL.
2.8 Mute
To mute the microphone:
1.During a call, press MUTE on the telephone base. The MUTE light turns on when the mute function is turned on.
You can hear the party on the other end but they cannot hear you.
2. Press MUTE again to resume the conversation. The MUTE light turns off.
2.9 Hold
To place a call on hold:
1. During a call, press HOLD on the telephone base to place that call on hold. The LINE key flashes when the call is
placed on hold.
2. To release the call from hold, press the LINE key.
2.10 Transfer a call
During a call, press FLASH to put the current call on hold.
When you hear a dial tone, dial the number you want to transfer the call to.
When you hear the ringing tone or the call is answered, press LINE or place the corded handset back in the
telephone base.
  Then the call is transferred.