V-TUF MAMMOTH110-STAINLESS User manual

MAMMOTH STAINLESS
Please read this manual before using the MAMMOTH STAINLESS
All Errors & Omissions Excused – Specification May Change Without Notice – Please Refer To www.v-tuf.co.uk For the Latest Version
Heavy Duty Industrial Wet & Dry Vacuum Cleaner

3
Contents
CONTENTS
Page
Safety Instructions
Mammoth Stainless Diagram
3
4-5
6-9

3
NOISE - DB - TESTED FROM 2 METERS
TECHNICAL DATA:
78
in warehouse environment
NOISE - DB - TESTED FROM 3 METERS- 75
in warehouse environment
TANK CAPACITY - (LITRES) 80
WET CAPACITY - (LITRES) 54
DRY CAPACITY - (LITRES) 65
HOSE ID - MM 38
AIR FLOW 60 CFM
AIR FLOW L/SEC (PER MOTOR) 28 CFM
AIR VELOCITY (M/SEC) 25
PRODUCT WEIGHT (without accessories) kg 27
33PACKED WEIGHT (including accessories) - kg
640 x 620 x 1010DIMENSIONS (L x W x H mm)
660 x 640 x 1060
PACKAGING (L x W x H cm)
MAMMOTH STAINLESS
86
85
80
54
65
38
86 CFM
41 CFM
36
27
33
640 x 620 x 1010
660 x 640 x 1060
MAMMOTH240-STAINLESSMAMMOTH110-STAINLESS

Safety Inst
These instare  the user’s safety, and all users  the V-TUF cleaning
equipment shuld ensure thave read this literature  using the
machine.
with a damaged cable.
run ver the cable.
ld be inaccessible ldren and pets.
use in the presence f ammable gasses.
Dlean up any ial, e.g. ash.
Always turn  the machine, and then unplug it,  yu service the
machine.
Do NOT use this machine without the filter INCLUDED
The iginal m prn lter (21) can be used r wet & dry su but it must be red
 the vacuum  dry be being used again. If this is m  a spare lter (VTVS021)
and alternate the use. See Mrn Filter & Exhaust Filter
ORTANT! The lter (21) ided with this machine will be suitable  mt ap;
ver in se applica the ltra level will be insuient. V-TUF will  accept
resnsibility f damage tthe machine r  the user due  ient levels  ltra  the
applin. In an applin where large vmes  water are being sucked up, we remend yu
use the wet-nly lter FLT02 (purchased separately). If it is an applica where ne dust is being
sucked up, we mmend y use the dry- lter VTVS086 + VTVS087 (purchased separately).
All repairn V-TÜF prduct be dne by a V-TÜF service represee.
If the machine wn, be sure tture machine and unplug it be lng.
ty, the machine cntains an elenr pr
Always turn ug the machine when itin use.
4

5
If any parf the applianes damagactured, it must be replaced by a V-TÜF engineer.
Operang Inst
All V-TUF rducts ld arrive  the cnsumer as ready tuse immediately. Simply, plug in  the mains
 then start the machinving thn/itch  the  pi
ec Filter & Exhaust Filter
The r prn lter (21) is ly accessible by reming the vacuum head. Lithe t prn
lter up by the bracket. When replacing the r pr lter make sure that it is pressed in 
. Theen lter will prtect tts when vacuuming wet & dry material.
If the r pn lter g 21) is used  wet suc It must be red utside the vacuum  dry
 being used again. If this is prblem  a spare lter (21. Dust screen) and alternate the use. This
l be cleaned when it is dirty.
ec lters:
VTVS8021 (FIG.21) Dust Screen VTVS7020L WETly er
 ONLY use the Machine is suppled with the
Change the exhaust lter at the same me as the r p lter.   this, carefully reme the lter
retaining rings and put them  the side. Next pull the rcement strips  the exhaust lter  f the
using sland reme the lter fm the using.
When reassembling, please ensure the exhaust lter is  ectly in the using sl and the lter
retaining rings are installed crectly.
Only use genuine V-TÜF replacements on the appliance. V-TUF will not accept responsibility for damage to
the machine or to the userdue to insufficient levels of filtra�on for the applica�on.
Acc

MAMMOTH STAINLESS
2
4
6
5
8
7
3
1
TAV.2
6

Pos. Cod. Q.ty Description
VTVS8150
VTVS8151
VTVS8152
VTVS8159
VTVS0245T
VTVS8154
VTVS8151
VTVS023MST
1
2
3
4
5
6
7
8
1
2
2
1
2
2
2
2
METAL TROLLEY ( PART A )
CLOSED LOCK NUT M10
HEXAGONAL HEAD METRIC SCREW M10X40
METAL TROLLEY ( PART B )
WHEEL Ø260MM
STAINLESS STEEL PIN Ø29X40MM
CLOSED LOCK NUT M10
WHEEL Ø100MM
MAMMOTH STAINLESS
METAL TROLLEY
7

18
15
17
14a
13
14b
32
34
33
31
38
27
28
35
30
29
36
37
26
25
24
23
22
20
5
7
9a
8
2
1
3
21
19
16
9b
MAMMOTH STAINLESS
8

MAMMOTH STAINLESS
Pos. Cod. Q.ty Description
VTVS7513
VTVS8100
VTVS7422Y
VTVS8102
VTVS8104
VTVS8105
I10. 1505C- 110V Cord + Plug
I10. 1605C- 240V Cord + Plug
VTVS8108
a. VTVS 7826 - 110V Motor
b. VTVS 7825 - 240V Motor
VTVS8109
VTVS8110
VTVS8111
VTVS8112
VTVS8113
VTVS8114
VTVS8115
VTVS8116
VTVS8117
VTVS8118
VTVS7512
VTVS8022
VTVS8119
VTVS8120
VTVS8121
VTVS8021
VTVS055
VTVS8122
VTVS7491
VTVS8124
VTVS7512
VTVS7164
VTVS7165m
VTVS8125
1
2
3
5
7
8
9a
9b
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
4
1
2
1
1
1
1
1
2
2
3
2
1
1
2
1
1
4
1
4
1
1
1
1
1
5
1
2
1
2
1
1
1
SELF TIPPING SCREW 5X30 ZN
HANDLE E.2 L=229MM
RED LIGHT SWITCH 2P
BLACK COVER Ø440 WITH 2 HOLES
FOAM NOISE Ø370 E.2
BLACK MOTOR COVER Ø452
POWER CORD H05 2X1,5MMQ 110V
BLACK MOTOR HOLDER Ø444
DOUBLE STAGE MOTOR
"L"GASKET S/F H=8
SOUND ASSORBENT TRIANGLE
AUTOMATIC VALVE Ø50
YELLOW MOTOR BASE Ø452 WITH HOLE FO VBR
FLOAT Ø80
SELF TIPPING SCREW 2.9X19 ZB
METAL GRID Ø92MM H54MM
VIBRATOR SPACER H30MM
SPRING H12MM
FLOAT SUPPORTING Ø168
SELF TIPPING SCREW5X25 TC ZN
HEPA CARTRIDGE FILTER Ø250 H178
GASKET NBR 15X7, 8X2 MM (optional extras)*
CARTRIDGE WINGNUT M8X20 (optional extras)*
FILTER BASKET Ø252
POLYESTER FILTER WITH RING Ø44 (optional extras)*
POLYESTER BAG (optional extras)*
TANK ROLLO HINGE Ø25
COMPLETE SPRING HOOK BLACK
STAINLESS STEEL TANK H=580
SELF TIPPING SCREW 5X25 TCZN
GASKET INLET Ø48
INLET Ø48
COMPLETE HANDLE 120MM
*optional extras – Not included with the basic machine
9

10