Vais Technology GSR-HM51 User manual

Copyright (C) 2003-2020 VAIS Technology Published November 18, 2019
www.vaistech.com
Owner’s Manual
Model GSR-HM51
Generationx2
(Subscription is required. Sold separately.)
Compatible with select Harley Davidson models.
Refer to GSR-HM51 application guide for details.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Interface Adapter
Harley Davidson
GSR-HM51-MAN

Installation 5
User Interface - Channels, Presets, Categories 11
Warranty 12
SiriusXM Source Selection 8
Before You Start 3
DO NOT DISASSEMBLE OR ALTER
Doing so may result in an accident, fire or electric shock
Do not block the airbag
Do not mount product or any added audio and/or video equipment where it can obstruct the operation of any safety
devices such as the airbag.
Distraction Warning
Do not let product or any added audio and/or video equipment distract you while you are driving.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL
Before starting any installation work , you must wait 90 seconds after turning the ignition switch to the LOCK position and
disconnecting the negative (-) terminal from the battery. The supplemental restraint system (airbag) is equipped with a
backup power source. If installation work is started less 90 seconds after disconnection of the negative (-)battery terminal,
the SRS may deploy. When the negative (-) terminal cable is disconnected from the battery the clock and audio systems
memory will be erased. Before starting installation work make a record of the clock and audio systems memory settings.
When installation is complete, reset the clock and audio systems to their previous settings . Power tilt, power telescopic
steering column, front power seats, power mirrors, and power shoulder belt anchorage are equipped with a memory
function .The rear power seat is not equipped with a memory function. e and they can make a record of the memory
contents, rear power seat is not equipped with the memory function. When installation is complete, it is necessary to
readjust the features to their previous settings Never use a backup power supply (such as another battery) during
installation work to avoid losing these memory settings.
DO NOT SPLICE INTO ELECTRICAL CABLES
Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS
Cables or wiring that obstruct or get caught on places such as the steering wheel, shift lever, brake pedals, etc. can be
extremely hazardous.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST
Moisture or dust may result in product failure.
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS
The wiring and installation of this product requires special technical skills and experience.
USE ONLY SPECIFIED ACCESSORY PARTS
Use of other than specified parts may damage product internally.
Follow the operational and installation manuals.
YOU SHOULD READ AND FAMILIARIZE YOURSELF THOROUGHLY WITH THE FOLLOWING INFORMATION PRIOR
TO INSTALLING AND USING THIS UNIT. IN ADDITION, YOU MUST CAREFULLY READ AND FOLLOW THE
INSTALLATION SCHEMATICS/INSTRUCTIONS FOR THE PRODUCT AND THE VEHICLE IN WHICH IT IS BEING
INSTALLED. FAILURE TO FOLLOW INSTALLATION INSTRUCTIONS MAY DAMAGE THE PRODUCT AND THE
VEHICLE, WILL VOID THE PRODUCT WARRANTY, AND MAY VOID THE VEHICLE WARRANTY.
Check your local laws
Some States/Provinces or other governmental jurisdictions (such as cities) may have laws that prohibit the operation of a
video screen within the sight of the Driver. If you have purchased such a product, you should use the product only in
locations where it is legal to do so, and if you do use the product, set up the screen so it is only visible to passengers.
TROUBLESHOOTING
Should this product fail to operate properly, please contact your Dealer or our Customer Service Department at
[email protected].
WARNING
CAUTION
This unit is an interface adapter for Toyota/Scion head unit to control the SiriusXM Tuner SXV300 (SOLD SEPARATELY).
IMPORTANT
The unit may refuse to change the channel if your reception is going ON and OFF.
Please wait until your reception stabilizes in order for the unit to allow you to change the channel easily.
Due to bad reception in some areas, SiriusXM Satellite Radio may not work and/or not able to display text.
About SiriusXM Satellite Radio Operation
Before You Start

Installation 5
User Interface - Channels, Presets, Categories 11
Warranty 12
SiriusXM Source Selection 8
Before You Start 3
DO NOT DISASSEMBLE OR ALTER
Doing so may result in an accident, fire or electric shock
Do not block the airbag
Do not mount product or any added audio and/or video equipment where it can obstruct the operation of any safety
devices such as the airbag.
Distraction Warning
Do not let product or any added audio and/or video equipment distract you while you are driving.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL
Before starting any installation work , you must wait 90 seconds after turning the ignition switch to the LOCK position and
disconnecting the negative (-) terminal from the battery. The supplemental restraint system (airbag) is equipped with a
backup power source. If installation work is started less 90 seconds after disconnection of the negative (-)battery terminal,
the SRS may deploy. When the negative (-) terminal cable is disconnected from the battery the clock and audio systems
memory will be erased. Before starting installation work make a record of the clock and audio systems memory settings.
When installation is complete, reset the clock and audio systems to their previous settings . Power tilt, power telescopic
steering column, front power seats, power mirrors, and power shoulder belt anchorage are equipped with a memory
function .The rear power seat is not equipped with a memory function. e and they can make a record of the memory
contents, rear power seat is not equipped with the memory function. When installation is complete, it is necessary to
readjust the features to their previous settings Never use a backup power supply (such as another battery) during
installation work to avoid losing these memory settings.
DO NOT SPLICE INTO ELECTRICAL CABLES
Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS
Cables or wiring that obstruct or get caught on places such as the steering wheel, shift lever, brake pedals, etc. can be
extremely hazardous.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST
Moisture or dust may result in product failure.
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS
The wiring and installation of this product requires special technical skills and experience.
USE ONLY SPECIFIED ACCESSORY PARTS
Use of other than specified parts may damage product internally.
Follow the operational and installation manuals.
YOU SHOULD READ AND FAMILIARIZE YOURSELF THOROUGHLY WITH THE FOLLOWING INFORMATION PRIOR
TO INSTALLING AND USING THIS UNIT. IN ADDITION, YOU MUST CAREFULLY READ AND FOLLOW THE
INSTALLATION SCHEMATICS/INSTRUCTIONS FOR THE PRODUCT AND THE VEHICLE IN WHICH IT IS BEING
INSTALLED. FAILURE TO FOLLOW INSTALLATION INSTRUCTIONS MAY DAMAGE THE PRODUCT AND THE
VEHICLE, WILL VOID THE PRODUCT WARRANTY, AND MAY VOID THE VEHICLE WARRANTY.
Check your local laws
Some States/Provinces or other governmental jurisdictions (such as cities) may have laws that prohibit the operation of a
video screen within the sight of the Driver. If you have purchased such a product, you should use the product only in
locations where it is legal to do so, and if you do use the product, set up the screen so it is only visible to passengers.
TROUBLESHOOTING
Should this product fail to operate properly, please contact your Dealer or our Customer Service Department at
[email protected].
WARNING
CAUTION
This unit is an interface adapter for Toyota/Scion head unit to control the SiriusXM Tuner SXV300 (SOLD SEPARATELY).
IMPORTANT
The unit may refuse to change the channel if your reception is going ON and OFF.
Please wait until your reception stabilizes in order for the unit to allow you to change the channel easily.
Due to bad reception in some areas, SiriusXM Satellite Radio may not work and/or not able to display text.
About SiriusXM Satellite Radio Operation
Before You Start 3

Only SiriusXM®brings you more of what you love to listen to, all in one place. Get over 140
channels, including commercial-‐free music plus the best sports, news, talk, comedy and
entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription
are required. For more information, visit www.siriusxm.com.
The SiriusXM Radio ID is required for activation and can be found by tuning to Channel 0 as well as
by looking on the label found on the SiriusXM Connect tuner and its packaging.
After installing your SiriusXM Connect Vehicle Tuner and antenna, power on your radio and select
SiriusXM mode. You should be able to hear the SiriusXM preview channel on Channel 1. If you
cannot hear the preview channel, please check the installation instructions to make sure your
SiriusXM Connect tuner is properly installed.
After you can hear the preview channel, tune to Channel 0 to find the Radio ID of your tuner. In
addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner and its
packaging. You will need this number to activate your subscription. Write the number down for
reference.
Note: the SiriusXM Radio ID does not include the letters I, O, S or F.
In the USA, you can activate online or by calling SiriusXM Listener care:
• Visit www.siriusxm.com/activatenow
• Call SiriusXM Listener Care at 1-866-635-2349
For Canadian Subscriptions, please contact:
• Visit www.siriusxm.ca/activatexm
• Call XM customer Care at 1-877-438-9677
As part of the activation process, the SiriusXM satellites will send an activation message to your
tuner. When your radio detects that the tuner has received the activation message, your radio will
display: “SUBSCR UPDATE...” “< please wait >”. Once subscribed, you can tune to channels in
your subscription plan. Note, the activation process usually takes 10 to 15 minutes, but may take up
to an hour. Your radio will need to be powered on and receiving the SiriusXM signal to receive the
activation message.
Sirius, XM, SiriusXM and all related marks and logos are trademarks of Sirius XM Radio Inc. All
rights reserved.
Before You Start
SiriusXM
Antenna
Built-in
Mounting
Bracket
What’s Included
Model: GSR-HM51
GSR-HM51 Harley Davidson Interface Adapter
USB Male Cable
(connect the factory original
USB Female Cable to this
USB Male Connector)
GSR-HM51
USB Female Cable
(replaces the factory original
USB Female Cable in the fairing)
Power
Cable
Installation
Fairing
Pocket
1
Locate and open the fairing pocket
which has the factory original USB
Female Cable.
Connecting GSR-HM51
The GSR-HM51 is weather resistant, not weather-proof, and care must be taken
to install the unit where it will not have direct contact with water. Do not open
the GSR-HM51 as this will void the warranty.
1
4

SiriusXM
Antenna
Built-in
Mounting
Bracket
What’s Included
Model: GSR-HM51
GSR-HM51 Harley Davidson Interface Adapter
USB Male Cable
(connect the factory original
USB Female Cable to this
USB Male Connector)
GSR-HM51
USB Female Cable
(replaces the factory original
USB Female Cable in the fairing)
Power
Cable
Installation
Fairing
Pocket
1
Locate and open the fairing pocket
which has the factory original USB
Female Cable.
Connecting GSR-HM51
The GSR-HM51 is weather resistant, not weather-proof, and care must be taken
to install the unit where it will not have direct contact with water. Do not open
the GSR-HM51 as this will void the warranty.
1
5

Installation
Remove the factory original USB Female Cable from the fairing pocket and
replace with the USB Female Cable from the GSR-HM51.
Connect the factory original USB Female Cable (which was removed from
the fairing pocket) to the USB Male Cable from the GSR-HM51 which is
labeled “SAT Radio”. Apply silicone or other waterproong material to
the exterior of these USB connectors to make a watertight seal.
2
3
Factory Original
USB Female Cable
2
2
3
3
Factory Original
USB Female Cable
Connect and
waterproof
IMPORTANT
IMPORTANT
!
INSTALLER:
This USB connection
must be made water-
proof.
Apply silicone or other
caulk to the exterior
of this USB connection
to ensure that there is a
watertight seal.
Failure to waterproof
this connection can
damage the GSR-HM51
and the factory radio
receiver through water
intrusion.
Connect the GSR-HM51 to 12V power. Note that all power wires must be
connected, and the Pink and Yellow +12V wires must be connected to
constant battery power.
4
Place the magnetic mount antenna where it has a clear unobstructed view
of the sky. The surface of the antenna which has the SiriusXM logo must be
facing the sky. There can be no metal objects above the antenna which will
interfere with receiving a satellite signal.
Mount the GSR-HM51 using the built-in bracket to a secure location where
it will not have direct contact with water.
6
5
Blue AND Green Wires
connect BOTH to car chassis ground
CONSTANT BATTERY POWER ONLY
!
ALL POWER WIRES
ALL POWER WIRES
MUST BE CONNECTED
MUST BE CONNECTED
!
Pink AND Yellow Wires
CONSTANT BATTERY POWER +12V
connect BOTH to constant battery power
DO NOT CONNECT TO
DO NOT CONNECT TO
ACCESSORY POWER
ACCESSORY POWER
!
Bl AND GWi
P
i
CO
N
S
conne
c
!
Installation
6

Installation
Remove the factory original USB Female Cable from the fairing pocket and
replace with the USB Female Cable from the GSR-HM51.
Connect the factory original USB Female Cable (which was removed from
the fairing pocket) to the USB Male Cable from the GSR-HM51 which is
labeled “SAT Radio”. Apply silicone or other waterproong material to
the exterior of these USB connectors to make a watertight seal.
2
3
Factory Original
USB Female Cable
2
2
3
3
Factory Original
USB Female Cable
Connect and
waterproof
IMPORTANT
IMPORTANT
!
INSTALLER:
This USB connection
must be made water-
proof.
Apply silicone or other
caulk to the exterior
of this USB connection
to ensure that there is a
watertight seal.
Failure to waterproof
this connection can
damage the GSR-HM51
and the factory radio
receiver through water
intrusion.
Connect the GSR-HM51 to 12V power. Note that all power wires must be
connected, and the Pink and Yellow +12V wires must be connected to
constant battery power.
4
Place the magnetic mount antenna where it has a clear unobstructed view
of the sky. The surface of the antenna which has the SiriusXM logo must be
facing the sky. There can be no metal objects above the antenna which will
interfere with receiving a satellite signal.
Mount the GSR-HM51 using the built-in bracket to a secure location where
it will not have direct contact with water.
6
5
Blue AND Green Wires
connect BOTH to car chassis ground
CONSTANT BATTERY POWER ONLY
!
ALL POWER WIRES
ALL POWER WIRES
MUST BE CONNECTED
MUST BE CONNECTED
!
Pink AND Yellow Wires
CONSTANT BATTERY POWER +12V
connect BOTH to constant battery power
DO NOT CONNECT TO
DO NOT CONNECT TO
ACCESSORY POWER
ACCESSORY POWER
!
Bl AND GWi
P
i
CO
N
S
conne
c
!
Installation 7

Touch SiriusXM to select Audio Source
Touch SiriusXM to select Audio Source
Touch to select Find
Touch to select Find
Touch Media to show Sources
Touch Media to show Sources
Fav
Home
Tuner
Media
Com
Nav
Setup
SIRIUSXM
MediaBack
Present Tense
Pearl Jam
P1-CH022 Pearl Ja...
SiriusXM
1
2:46 -57:1423 of 261
2
3
Find Menu
4
5
6
8

Arst
Song
Album
Genre
FindBack
Touch to select Artist
Touch to select Artist
Present Tense
Pearl Jam
P1-CH022 Pearl Ja...
SiriusXM
1
2:46 -57:1423 of 261
2
3
Find Menu
4
5
6
Seek
Track List
Scan
Repeat
MenuBack Audio
Shuffle
!
Tap Menu on the Now Playing screen and be sure that Seek is shown on the
Menu screen. If Presets is shown tap the Presets button to change to Seek.
Long Touch on “Track Seek ” or “Track Seek ” to switch to next available
channel.
“Track Seek ” or “Track Seek ” (on handlebar controls) switch to next available
channel.
9

10

11

VAIS Technology, 8811 American Way, Englewood, CO 80112
www.vaistech.com Phone: [phone] [email protected]
GSR-HM51-MAN
Warranty is available for download: https://www.vaistech.com/download/15244/
To request a paper warranty copy please contact us:
VAIS Technology
Warranty Department
8811 American Way
Unit 125
Englewood, CO 80112
720-733-2348
[email protected]

(<Siriusxm· >)
SATELLITE RADIO
SXV300 Connect Vehicle Tuner
INSTALLATION GUIDE
SIRIUS xr.
WITHTMOYNTHS
FREE SERVICE
Minimum subscription and credit card required.
See Offer Details on page 10.
S&O '''ALUE INCLUDESALLACCESS
Y ~ SUBSCRIPTION PACKAGE

Thank you for purchasing the SXV300V1 SiriusXM Connect Vehicle Tuner Kit.
This kit comes with everything you need to add Satellite Radio to your
SiriusXM -R eady headunit. Consult your headunit User Guide for features and
detailed operational instructions.
For questions or support, please visit www.siriusxm.com or call 1-866-635-2349.
What's In the Box?
The SXV300Vl kit includes the following:
Alcohol
Prep Pad
Alcohol Prep
Pad
SXV300 Vehicle Tuner Magnetic Mount Antenna
Check Your Headunit For Compatibility
If your headunit has the official SiriusXM-
Ready logo it is compatible with the
SXV300 Vehicle Tuner. All SiriusXM-
Ready headunits include a dedicated
connector, allowing for quick and easy
connection of the SXV300 tuner.
((<Siriusxm >))
A ■ ADY
Products with this logo are compatible
~ ~~ ~ ! ((< a l))
Products with these logos are not compatible
11!======~=~~===""'--"-'-""'"'---'--"----~......,....,,....,.,,......,.,,- ..... ...........,,.....,,.,.,..,.......,,_.,.

Install the Magnetic Mount Antenna
Proper placement of the Magnetic Mount Antenna is very important. Consult
a professional installer if you are uncomfortable with installing the antenna
yourself. More detailed installation instructions and illustrations can be found at
www.siriusxm.com/installation and clicking on the XM Vehicle Installation link.
• Place the Magnetic Mount Antenna on the
outside of your vehicle on a horizontal surface
that always faces the sky.
• Avoid placing the antenna near obstacles that
could block a clear view of the sky (such as
roof racks, other antennas like AM/FM, cellular,
and GPS), preventing the satellite signal from
reaching the antenna.
Select the Best Location for the Magnetic Mount Antenna
For most vehicles the best location is on the roof,
centered above the rear window or front windshield.
Consult a professional installer to find an alternate
antenna mounting location if your vehicle roof is made
from a non-magnetic material such as aluminum,
fiberglass, or carbon fibre.
• Sedan or Coupe: Recommended mount i ng location
is above the rear window or front windshield.
• Pickup or SUV: Recommended mounting location is
above the front windshield.
• Convertible: Recommended mounting l ocation is
above the front windshield, or alternately on the
trunk lid, on the front hood, or on top of the front
fender.

Route the Antenna Cable
Use care when routing the antenna cable into and through the vehic le
interior, avoiding sharp objects that can damage the cable. Keep the antenna
cable away from moving parts such as gas and brake pedals, trunk and door
hinges, and sliding seat brackets .
Hide the antenna wire inside the vehicle cabin by routing the cable under the
carpet and behind plastic trim, toward the headunit location. Coil and secure
any excess cable in a hidden location, such as under the carpet, using wire
ties (not included).
CAUTION! Do not kink or sharply fold the antenna cable.
2. Route cable out of window
moulding and into weather-
stripping around trunk opening.
1. Feed cable under
rubber moulding
__ round window.
~
5. Bring cable out from trim and
, route undercarpet and behind
the dash to the headunit. Coil
3. Route cable along trunk ____ _. and secure excess cable under
wall and into cabin. carpet or behind dash.
4. Route cable from trunk under interior trim,
into cabin and towards front of vehicle.
3 --------------------------------- ...

Make the Connections
You'll need to access the back of the SiriusXM-Ready headunit so you can
plug the SXV300 Vehicle Tuner into it. This may require you to remove
the headunit from the dashboard. If you are uncomfortable with this step,
consult a professional installer.
Be sure to turn OFF the SiriusXM-Ready headunit before connecting the
SXV300 Vehicle Tuner. Locate the SiriusXM connector on the headunit and
connect the SXV300. The headunit may have a panel mount type connector,
or it may have a pigtail type connector.
PANEL MOUNT
TYPE CONNECTOR
To disconnect,
slide lock back
'
Plug the Magnetic Mount Antenna
into the SXV300 Vehicle Tuner.
Connector
orientation
may vary
PIGTAILTYPE
CONNECTOR
4 .,_ ______________________________ __.

Secure the Tuner
Secure the SXV300 Vehicle Tuner behind the vehicle headunit location or
under the dash using wire ties (not included).
Thread the wire ties through the molded brackets on the underside of the
Tuner as shown. Then secure it to a bracket or wiring harness using the wire
ties . Avoid brackets with sharp edges and any moving parts such as gas and
brake pedals.
1111111
11111111111111111111111111
Reinstall the vehicle headunit if it had been removed from the dashboard.
s ------------------------------------

Subscribe
You can subscribe to the SiriusXM service anytime by following these steps:
1 Make sure your vehicle headunit is turned on and that Satellite Radio is
selected. Verify that you are receiving the SiriusXM signal so that you
can hear the SiriusXM audio.
2 Make a note of your Radio ID. You can find it on channel 0, on a label on
the bottom of the packaging, and on the label on the bottom of your
SXV300 Vehicle Tuner.
NOTE! The Radio ID does not use the letters I, 0 , S, or F.
3 Activate your service :
• First see our Customer Agreement for complete terms at
www.siriusxm . com and then:
• Online: Go to www.siriusxm.com/activatenow
OR
• By phone: Call 1-866-587-4225 (If calling to activate, be sure to
mention " Never Miss A Beat")
4 Activation usually takes 10 to 15 minutes, but may take up to an hour.
We recommend that your vehicle headunit remain on until subscribed .
When your service is activated , you will see the SUBSCRIPTION
UPDATED, PRESS ENTER TO CONTINUE or similar message displayed
on the headunit. Once subscribed , you can tune to channels in your
subscription plan .
5 Activation signals can be sent again at any time by visiting
www . siriusxm.com /refresh.

Troubleshooting
The troubleshoot ing information l isted below is for general reference.
Consult the User Guide for your SiriusXM-Ready headunit for specific
operating instructions and advisory messages that may be displayed. Your
headunit may display sl ightly different messages.
If you see this on the I Try this:
screen:
No Signal (NoSignal)
Check Antenna (Chek
Antenna , CHK Antena ,
Chek Ant)
Antenna Disconnected
Antenna Cable Shorted
Check Tuner (Chek Tuner,
Chk Tunr)
Channel Not Available (Chan
Unavailable, Ch Unavailable,
Ch Unavail, Ch Unavl)
Channel Not Subscribed
(CH Unsubscribed, Chan
Unsub , Ch Unsub)
• Make sure that the vehicle is outdoors with a clear
view of the southern sky .
• Make sure the Magnetic Mount Antenna is mounted
outside of the vehicle .
• Move your antenna away from any obstructed area. For
example , if you are parked in an underground garage,
you should receive a signal after leaving the garage .
• Make sure that the Magnetic MountAntenna cable is firmly
and securely plugged into the SXV300 Vehicle Tuner.
• Make sure the antenna cable is not bent or broken.
•Turn the head unit off, then on , to reset this message .
If the message persists, most likely the antenna cable
has been damaged. Replace the antenna.
Check the antenna connection to make sure it is fully
plugged into the SXV300 Vehicle Tuner.
Replace the antenna.
Check the SXV300 Vehicle Tuner connection to the
headunit and make sure it is plugged all the way in.
The channel you have selected is not available.
The channel you have selected is not part of your
current subscription plan . First see our Customer
Agreement for complete terms at www.siriusxm.com ,
and then call 1-866-635-2349 to subscribe .