VALCOBABY IRIS User manual

IRIS
Glider
PRODUCT REFERENCE GUIDE
Thank you for purchasing this quality Valcobaby product.
It is extremely important that you understand all the warnings and safety guidelines
before use; Follow the instructions carefully before assembling this product.
Familiarise yourself with the construction and safety features; be sure that you
understand all the warnings and guidelines before use.
IMPORTANT! KEEP FOR
FUTURE REFERENCE
Find us on:
@valcobabyaus
ANOTHER QUALITY PRODUCT
DISTRIBUTED BY
MELBOURNE, AUSTRALIA
valiantbrands.com.au
© Copyright VB 2022 vs161222
FURTHER INFORMATION
In Australia/New Zealand

1>PARTS LIST
DISCLAIMER
ICONS
Iris Glider
Due to our policy of continuous product
development, this product is constantly evolving.
It is possible that some features or procedures
outlined here have changed since this document
was written. If you are unsure of any procedure
shown here, please contact us via the web at
[e-mail] to obtain the most
up to date information before use. Include the
batch number and model number, which can be
found on a sticker on the frame.
All pictures and diagrams herein are provided
for illustration purposes only.
Actual product,
colour or fabric may vary. Valcobaby reserves
the right to modify or alter any specification or
colour without notice or obligation to modify any
product previously purchased.
M6*20mm X 4
D
B
M6 X 1
E
X 2
X 1
X 1
CA
1

STEP 3
STEP 2
STEP 1
EC
A
B B
D
2>ASSEMBLY
2

WARNING: TO AVOID INJURY OR DEATH
Find us on:
@valcobabyaus
© Copyright VB 2022 vs161222
FURTHER INFORMATION
In Australia/New Zealand
• NEVER LEAVE CHILDREN UNATTENDED.
• THIS GLIDER IS NOT A TOY. DO NOT ROCK VIOLENTLY OR SPIN CHAIR QUICKLY. DO NOT ALLOW
CHILDREN TO PLAY ON THE CHAIR.
• MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS DURING ASSEMBLY. OTHERWISE
THEY MAY BE INJURED.
• GLIDER WEIGHT LIMIT: 120KG
• FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
To clean fabric:
• Always attend to stains and spills as quickly as possible after the incident.
•Mop up any spilled liquid and gently wipe away any dirt, then wipe surface clean with
warm water and mild detergent.
• Do not scrub at fabric.
• Allow to dry completely before use.
• Gently wipe off dust on the base as required with a soft cloth.
• Moving parts are best lubricated with a silicone based product.
• Do not use oil based products.
WARNINGS
CARE INSTRUCTIONS
www.valcobaby.com.au
3