Valcom VIP-9831 User manual

1 947789
CAUTION: To reduce the risk of electric shock,
Do not remove cover.
No user serviceable parts inside.
Refer servicing to qualified service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates thatthere are
important operating and maintenance
instructions in the literature accompanying
this unit.
ISSUE 2
VIP-9831 IP Stealth Horn One-Way
INTRODUCTION
The VIP-9831 IP Stealth Horn One-Way is a self
contained paging system which enables voice paging
up to 300 feet from an Ethernet connection. The
VIP-9831 consists of a horn and Network/Audio
Interface board allowing stand alone capability when
used with a SIP enabled telephone system or can be
accessed from a variety of Valcom managed VoIP
products.
SPECIFICATIONS
Access Methods
PBX, FXO Port w/VIP-811
POTS telephone set w/VIP-811
PBX, FXS Port w/VIP-821
Valcom M Cast Page Group
SIP telephone system
Features
RJ-45 network connection
Network activity LEDs
Power over Ethernet (PoE) 802.3af compatible
Dimensions/Weight
9.3 "H x 15.0 "W x 5.0 "D (23.6 cm x 38.1 cm x
12.7 cm)
Weight: 5.5 lbs (2.05 kg)
Shipping Weight: 6.0 lbs (2.24kg)
Environment
Temperature: 0 to +40° C
Humidity: 0 to 85% non-precipitating
Indoor use only
Power
Via 802.3af PoE Ethernet Switch: Class 3
Precautionary Designations
Packing List
Qty Item
1 VIP-9831 IP Horn
1 VSP Document
4 Mounting Screws
INSTALLATION
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates uses
and can radiate radio frequency energy and if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area may cause
harmful interference in which case the user will
be required to correct the interference at his own
expense.

2 947789
Mounting (Enclosure / Horn)
The horn should be mounted 8 to 12 feet above the
floor to allow for best sound distribution. This unit
can be mounted to a single gang, double gang,
octagon electrical box or wall. Refer to Figure 1.
Using a Phillips screwdriver, remove 4
screws attaching grille to enclosure base.
Using a11/32 nut driver, carefully remove
horn bracket assembly.
Carefully disconnect the black and white
speaker wires from Network/Audio PC board
Mount enclosure base to wall using
appropriate hardware.
Reconnect black and white speaker wires to
Network/Audio PC board.
Install horn bracket assembly.
Connect a 802.3af compliant PoE port (300
feet maximum distance) to network
connector on Network/Audio PC board.
Install grille onto enclosure base.
Status Indicator Lights
The VIP-9831 has 2 status indication lights located
on network jack:
Left LED: (Link) Indicates 100 Mbit Ethernet
connection when illuminated. No activity indicates 10
Mbit connection.
Right LED: (Activity) Indicator flashes to indicate
network activity
Operation
Provide paging from SIP connection or via a variety
of Valcom managed VoIP products. Integration to
customer telephone system can be via SIP
registration, FXO port (with VIP-811), or FXS port
(with VIP-821).
Setup
Information specific to your application will need to be
programmed into the VIP-9831 using a computer.
Setup will be done using the IP Solutions Setup Tool.
The IP Solutions Setup Tool may be downloaded
from the Valcom website at www.valcom.com.
TECHNICAL ASSISTANCE
Assistance is available from the factory when
problems are encountered. Call [phone] and
press 1 for Technical Support or visit our website at
http://www.valcom.com.
Valcom equipment is not field repairable. Valcom,
Inc. maintains service facilities in Roanoke, VA.
Should repairs be necessary, attach a tag to the unit
clearly stating your company name, address, phone
number, contact person and the nature of the
problem. Send the unit to:
Valcom, Inc.
Repair & Return Dept.
5614 Hollins Road
Roanoke VA. 24019

3 947789
Figure 1
VALCOM LIMITED WARRANTY
Valcom, Inc. warrants its products only to the original purchaser, for its own use, to be free from defects in materials and workmanship under conditions of
normal use and service for a period of one year from the date of shipment. This Limited Warranty obligation shall be limited to the replacement, repair or refund
of any such defective device within the warranty period, provided that:
1. inspection by Valcom, Inc. indicates the validity of the claim;
2. the defect is not the result of damage, misuse or negligence after the original shipment;
3. the product has not been altered in any way or repaired by others and that factory sealed units are unopened (a service charge plus parts
and labor will be applied to units defaced or physically damaged);
4. freight charges for the return of products to Valcom are prepaid;
5. all units 'out of warranty' are subject to a service charge. The service charge will cover minor repairs (major repairs will be subject to
additional charges for parts and labor).
This Limited Warranty is in lieu of and excludes all other warranties, expressed or implied and in no event shall Valcom, Inc. be liable for any
anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the purchase, operation,
maintenance, installation, removal or use of the product. The maximum liability of Valcom under this warranty is limited to the purchase price of the
specific Product covered by the warranty.
Disclaimer. Except for the Limited Warranty provided herein, the product is provided “as-is” without any warranty of any kind whatsoever including, without
limitation, any WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.
This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the carrier should be notified
immediately. Claims for such damage should be filed with the carrier involved in accordance with the F.O.B. point.
Headquarters:
Valcom, Inc.
5614 Hollins Road Roanoke, VA 24019-5056
Phone: [phone] FAX: [phone]