Valeton Dapper Indie User manual

◆ CONNECTIONS
Getting started with Dapper Indie is easy! Plug
your guitar cable into the INPUT jack and run
another cable from the OUTPUT jack to your
amp/mixer/computer interface. Here's how to
use the I/O panel:
OWNER’S MANUAL
Specially designed for ambient/indie/experimental rockers
and troublemakers, the Dapper Indie lets you embrace
independent spirit. This all-in one pedal has everything you
need, plus some inspirations. Please look over this manual to
help you get the most out of Dapper Indie.
INDIE DRIVE
INPUT
PHONES
FUZZ WALLLIQUID FX
OUTPUT
HOLDFOOTSWITCHFUZZ WALL TUNER(MUTETUNING)
ECHOESAMBIENT
WITH CAB SIM
WITHOUT CAB SIM
First in line is a big, bright, fast and accurate tuner so you can play confidently in tune.
Hold the FUZZ WALL module ON/OFF switch to enable the TUNER. When this module is
activated, Dapper Indie will be MUTED.
The note name appears on the screen (the dot on the bottom right of the screen stands
for “sharp”), and the pitch accuracy is indicated by the LEDs.
TUNER

The INDIE DRIVE module
reminds you of the classic
underground rock ‘n’ roll
scenes. Onboard controls
offers you wide tonal
performances from warm
clean-ups to wild grinding
solos.
Kick this module on when you
need to build an aggressive fuzz
wall. Like the INDIE DRIVE
module, the onboard controls
offer you wide tonal range with
some real muff-y power.
Give your song some epic spaciousness with the
AMBIENT module. This module provides 3 different
reverb modes with natural, musical decay.
Hold the footswitch to switch effect trail on/off. The
LEDs under the knobs will pulse to indicate the
change.
Controls:
LEVEL: Controls the output volume
BASS/TREBLE: Controls the low/high EQ parameters
GAIN: Controls the gain amount
Controls:
VOL: Controls the output volume
LOW/HIGH: Controls the low/high EQ parameters
FUZZ: Controls the fuzz effect output volume
Controls:
Toggle: Selects from 3 different delay modes:
-ANALOG: Produces a warm, vintage delay tone
-TAPE: Simulates the echo tone from a tape machine
-REVERSE: Produces a delay tone with reversed feedback
DELAY: Controls the effect volume
REGEN: Controls the delay feedback
TIME: Controls the delay time from 25ms to 2000ms
Controls:
Toggle: Selects from 3 different reverb modes:
-ROOM：Simulates the acoustics of a room
-HALL: Simulates the acoustics of a hall
-PLATE: Simulates a plate reverberator
REVERB: Controls the reverb amount
TONE: Controls the brightness
DECAY: Controls the duration of reverb time
Plug your headphones into the PHONES jack for silent jams. It’s equipped with a cab simulator, so you can run
Dapper Indie right to your headphones and sound like you're playing through a stack. You can also run a line out
of this jack for direct recording or straight to the house PA system.
The headphones output volume will be affected by the modules.
PHONES AND CAB SIM
Use the 3-mode ECHOES module to recall the
precious memories. Hold the footswitch to enable
the Tap Tempo function. Tap to the rhythm of your
song, and the TIME LED will pulse to indicate the
delay time you set. Hold the footswitch again to
return to knob-controlled tempo mode.
The LIQUID FX module combines 3 high quality popular modulation effects in one, offering you both classic-inspired
effects and modern inspirations. Use the 3-way toggles to pick an effect you like best!
Hold the footswitch to enable the Tap Tempo function. Tap to the rhythm of your song, and the RATE LED will pulse to
indicate the speed you set. Hold the footswitch again to return to knob-controlled tempo mode.
Controls:
TYPE toggle: Select an effect type from chorus, phaser and tremolo
DEPTH: Controls the effect depth
RATE: Controls the effect speed
Input Impedance: 1MΩ
Output Impedance: 100Ω
Power Requirement: 9V DC center negative
Current Consumption: 150mA
Dimensions: 320mm(D) ×65mm(W) ×42mm(H)
Weight: 650g
The contents of this manual are subject to change without notice.
AMBIENT
ECHOES
LIQUID FX
INDIE DRIVE FUZZ WALL